Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c10f' (ED25519) to the list of known hosts.
cwd: /var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest
rc: 0
stdout: 
stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD
INFO: Reading stdout from command: git rev-parse HEAD
INFO: Reading sources specification file: sources
INFO: Downloading geoserver_rest-2.9.1.tar.gz
INFO: Reading stdout from command: curl --help all
INFO: Calling: curl -H Pragma: -o geoserver_rest-2.9.1.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/@copr/PyPI/python-geoserver-rest/geoserver_rest-2.9.1.tar.gz/md5/9aa94a38094a4bca691fe020bbf4a0b3/geoserver_rest-2.9.1.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 31095  100 31095    0     0   573k      0 --:--:-- --:--:-- --:--:--  583k
INFO: Reading stdout from command: md5sum geoserver_rest-2.9.1.tar.gz

Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest/python-geoserver-rest.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1737681006.461301 -r /var/lib/copr-rpmbuild/results/configs/child.cfg
INFO: mock.py version 6.0 starting (python version = 3.13.0, NVR = mock-6.0-1.fc41), args: /usr/libexec/mock/mock --spec /var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest/python-geoserver-rest.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1737681006.461301 -r /var/lib/copr-rpmbuild/results/configs/child.cfg
Start(bootstrap): init plugins
INFO: tmpfs initialized
INFO: selinux enabled
INFO: chroot_scan: initialized
INFO: compress_logs: initialized
Finish(bootstrap): init plugins
Start: init plugins
INFO: tmpfs initialized
INFO: selinux enabled
INFO: chroot_scan: initialized
INFO: compress_logs: initialized
Finish: init plugins
INFO: Signal handler active
Start: run
INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest/python-geoserver-rest.spec)  Config(fedora-rawhide-x86_64)
Start: clean chroot
Finish: clean chroot
Mock Version: 6.0
INFO: Mock Version: 6.0
Start(bootstrap): chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1737681006.461301/root.
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled package manager cache
Start(bootstrap): cleaning package manager metadata
Finish(bootstrap): cleaning package manager metadata
INFO: Guessed host environment type: unknown
INFO: Using container image: registry.fedoraproject.org/fedora:rawhide
INFO: Pulling image: registry.fedoraproject.org/fedora:rawhide
INFO: Tagging container image as mock-bootstrap-5b908a28-5cda-44ae-8371-d679529d5c92
INFO: Checking that 3b26c95bbe87cc88f475ce9c0ba4b394bf23541b10bebe9a634c9c8e61f73b10 image matches host's architecture
INFO: Copy content of container 3b26c95bbe87cc88f475ce9c0ba4b394bf23541b10bebe9a634c9c8e61f73b10 to /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1737681006.461301/root
INFO: mounting 3b26c95bbe87cc88f475ce9c0ba4b394bf23541b10bebe9a634c9c8e61f73b10 with podman image mount
INFO: image 3b26c95bbe87cc88f475ce9c0ba4b394bf23541b10bebe9a634c9c8e61f73b10 as /var/lib/containers/storage/overlay/d3212d8beae72a97d426f4f4cbc9926037985c9d492b381ad2608549e5b9deb3/merged
INFO: umounting image 3b26c95bbe87cc88f475ce9c0ba4b394bf23541b10bebe9a634c9c8e61f73b10 (/var/lib/containers/storage/overlay/d3212d8beae72a97d426f4f4cbc9926037985c9d492b381ad2608549e5b9deb3/merged) with podman image umount
INFO: Removing image mock-bootstrap-5b908a28-5cda-44ae-8371-d679529d5c92
INFO: Package manager dnf5 detected and used (fallback)
INFO: Not updating bootstrap chroot, bootstrap_image_ready=True
Start(bootstrap): creating root cache
Finish(bootstrap): creating root cache
Finish(bootstrap): chroot init
Start: chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1737681006.461301/root.
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled package manager cache
Start: cleaning package manager metadata
Finish: cleaning package manager metadata
INFO: enabled HW Info plugin
INFO: Package manager dnf5 detected and used (direct choice)
INFO: Buildroot is handled by package management downloaded with a bootstrap image:
  rpm-4.20.0-1.fc42.x86_64
  rpm-sequoia-1.7.0-3.fc42.x86_64
  dnf5-5.2.8.1-2.fc42.x86_64
  dnf5-plugins-5.2.8.1-2.fc42.x86_64
Start: installing minimal buildroot with dnf5
Updating and loading repositories:
 fedora                                 100% |  24.1 MiB/s |  21.6 MiB |  00m01s
 Copr repository                        100% |  69.4 MiB/s |  43.4 MiB |  00m01s
Repositories loaded.
Package                            Arch   Version                    Repository      Size
Installing group/module packages:
 bash                              x86_64 5.2.37-1.fc42              fedora       8.2 MiB
 bzip2                             x86_64 1.0.8-20.fc42              fedora      99.3 KiB
 coreutils                         x86_64 9.6-1.fc42                 fedora       5.5 MiB
 cpio                              x86_64 2.15-2.fc41                fedora       1.1 MiB
 diffutils                         x86_64 3.10-9.fc42                fedora       1.6 MiB
 fedora-release-common             noarch 42-0.13                    fedora      19.8 KiB
 findutils                         x86_64 1:4.10.0-5.fc42            fedora       1.9 MiB
 gawk                              x86_64 5.3.0-4.fc41               fedora       1.7 MiB
 glibc-minimal-langpack            x86_64 2.40.9000-31.fc42          fedora       0.0   B
 grep                              x86_64 3.11-10.fc42               fedora       1.0 MiB
 gzip                              x86_64 1.13-3.fc42                fedora     392.9 KiB
 info                              x86_64 7.2-3.fc42                 fedora     357.9 KiB
 patch                             x86_64 2.7.6-26.fc42              fedora     258.7 KiB
 redhat-rpm-config                 noarch 300-1.fc42                 fedora     186.8 KiB
 rpm-build                         x86_64 4.20.0-8.fc42              fedora     165.2 KiB
 sed                               x86_64 4.9-4.fc42                 fedora     857.3 KiB
 shadow-utils                      x86_64 2:4.17.0-4.fc42            fedora       4.0 MiB
 tar                               x86_64 2:1.35-5.fc42              fedora       3.0 MiB
 unzip                             x86_64 6.0-66.fc42                fedora     390.3 KiB
 util-linux                        x86_64 2.40.4-2.fc42              fedora       3.4 MiB
 which                             x86_64 2.21-43.fc42               fedora      80.1 KiB
 xz                                x86_64 1:5.6.3-3.fc42             fedora       1.2 MiB
Installing dependencies:
 add-determinism                   x86_64 0.5.0-2.fc42               fedora       2.5 MiB
 alternatives                      x86_64 1.31-3.fc42                fedora      66.2 KiB
 ansible-srpm-macros               noarch 1-17.1.fc42                fedora      35.7 KiB
 audit-libs                        x86_64 4.0.3-2.fc42               fedora     351.3 KiB
 authselect                        x86_64 1.5.0-9.fc42               fedora     156.0 KiB
 authselect-libs                   x86_64 1.5.0-9.fc42               fedora     820.0 KiB
 basesystem                        noarch 11-22.fc42                 fedora       0.0   B
 binutils                          x86_64 2.43.50-12.fc42            fedora      25.8 MiB
 build-reproducibility-srpm-macros noarch 0.5.0-2.fc42               fedora     735.0   B
 bzip2-libs                        x86_64 1.0.8-20.fc42              fedora      84.6 KiB
 ca-certificates                   noarch 2024.2.69_v8.0.401-5.fc42  fedora       2.6 MiB
 coreutils-common                  x86_64 9.6-1.fc42                 fedora      11.1 MiB
 cracklib                          x86_64 2.9.11-7.fc42              fedora     242.4 KiB
 crypto-policies                   noarch 20241128-2.gitbb7b0b0.fc42 fedora     137.3 KiB
 curl                              x86_64 8.11.1-3.fc42              fedora     454.7 KiB
 cyrus-sasl-lib                    x86_64 2.1.28-28.fc42             fedora       2.3 MiB
 dbus                              x86_64 1:1.16.0-3.fc42            fedora       0.0   B
 dbus-broker                       x86_64 36-5.fc42                  fedora     395.1 KiB
 dbus-common                       noarch 1:1.16.0-3.fc42            fedora      11.2 KiB
 debugedit                         x86_64 5.1-4.fc42                 fedora     200.4 KiB
 dwz                               x86_64 0.15-9.fc42                fedora     291.0 KiB
 ed                                x86_64 1.21-2.fc42                fedora     146.5 KiB
 efi-srpm-macros                   noarch 6-2.fc42                   fedora      40.1 KiB
 elfutils                          x86_64 0.192-8.fc42               fedora       2.7 MiB
 elfutils-debuginfod-client        x86_64 0.192-8.fc42               fedora      83.9 KiB
 elfutils-default-yama-scope       noarch 0.192-8.fc42               fedora       1.8 KiB
 elfutils-libelf                   x86_64 0.192-8.fc42               fedora       1.2 MiB
 elfutils-libs                     x86_64 0.192-8.fc42               fedora     675.0 KiB
 expat                             x86_64 2.6.4-2.fc42               fedora     292.8 KiB
 fedora-gpg-keys                   noarch 42-0.4                     fedora     128.2 KiB
 fedora-release                    noarch 42-0.13                    fedora       0.0   B
 fedora-release-identity-basic     noarch 42-0.13                    fedora     719.0   B
 fedora-repos                      noarch 42-0.4                     fedora       4.9 KiB
 fedora-repos-rawhide              noarch 42-0.4                     fedora       2.2 KiB
 file                              x86_64 5.45-9.fc42                fedora     103.4 KiB
 file-libs                         x86_64 5.45-9.fc42                fedora       9.9 MiB
 filesystem                        x86_64 3.18-36.fc42               fedora     112.0   B
 filesystem-srpm-macros            noarch 3.18-36.fc42               fedora      38.2 KiB
 fonts-srpm-macros                 noarch 1:2.0.5-20.fc42            fedora      55.8 KiB
 forge-srpm-macros                 noarch 0.4.0-2.fc42               fedora      38.9 KiB
 fpc-srpm-macros                   noarch 1.3-14.fc42                fedora     144.0   B
 gdb-minimal                       x86_64 15.2-7.fc42                fedora      13.0 MiB
 gdbm                              x86_64 1:1.23-7.fc41              fedora     460.9 KiB
 gdbm-libs                         x86_64 1:1.23-7.fc41              fedora     121.9 KiB
 ghc-srpm-macros                   noarch 1.9.2-2.fc42               fedora     779.0   B
 glibc                             x86_64 2.40.9000-31.fc42          fedora       6.6 MiB
 glibc-common                      x86_64 2.40.9000-31.fc42          fedora       1.0 MiB
 glibc-gconv-extra                 x86_64 2.40.9000-31.fc42          fedora       7.2 MiB
 gmp                               x86_64 1:6.3.0-2.fc41             fedora     811.4 KiB
 gnat-srpm-macros                  noarch 6-7.fc42                   fedora       1.0 KiB
 go-srpm-macros                    noarch 3.6.0-6.fc42               fedora      60.8 KiB
 jansson                           x86_64 2.14-2.fc42                fedora      93.1 KiB
 json-c                            x86_64 0.18-2.fc42                fedora      86.7 KiB
 kernel-srpm-macros                noarch 1.0-25.fc42                fedora       1.9 KiB
 keyutils-libs                     x86_64 1.6.3-5.fc42               fedora      58.3 KiB
 krb5-libs                         x86_64 1.21.3-4.fc42              fedora       2.3 MiB
 libacl                            x86_64 2.3.2-3.fc42               fedora      38.3 KiB
 libarchive                        x86_64 3.7.7-2.fc42               fedora     938.6 KiB
 libattr                           x86_64 2.5.2-5.fc42               fedora      27.1 KiB
 libblkid                          x86_64 2.40.4-2.fc42              fedora     262.4 KiB
 libbrotli                         x86_64 1.1.0-6.fc42               fedora     841.3 KiB
 libcap                            x86_64 2.71-2.fc42                fedora     223.4 KiB
 libcap-ng                         x86_64 0.8.5-4.fc42               fedora      72.9 KiB
 libcom_err                        x86_64 1.47.2-3.fc42              fedora      67.1 KiB
 libcurl                           x86_64 8.11.1-3.fc42              fedora     842.0 KiB
 libeconf                          x86_64 0.7.5-2.fc42               fedora      68.5 KiB
 libevent                          x86_64 2.1.12-15.fc42             fedora     903.1 KiB
 libfdisk                          x86_64 2.40.4-2.fc42              fedora     372.3 KiB
 libffi                            x86_64 3.4.6-5.fc42               fedora      82.3 KiB
 libgcc                            x86_64 15.0.1-0.3.fc42.1          fedora     270.6 KiB
 libgomp                           x86_64 15.0.1-0.3.fc42.1          fedora     539.3 KiB
 libidn2                           x86_64 2.3.7-3.fc42               fedora     329.0 KiB
 libmount                          x86_64 2.40.4-2.fc42              fedora     356.2 KiB
 libnghttp2                        x86_64 1.64.0-1.fc42              fedora     174.5 KiB
 libnsl2                           x86_64 2.0.1-3.fc42               fedora      57.9 KiB
 libpkgconf                        x86_64 2.3.0-2.fc42               fedora      78.1 KiB
 libpsl                            x86_64 0.21.5-5.fc42              fedora      76.4 KiB
 libpwquality                      x86_64 1.4.5-12.fc42              fedora     409.3 KiB
 libseccomp                        x86_64 2.5.5-2.fc41               fedora     173.3 KiB
 libselinux                        x86_64 3.8-0.rc3.1.fc42.3         fedora     193.1 KiB
 libsemanage                       x86_64 3.8-0.rc3.1.fc42.1         fedora     308.4 KiB
 libsepol                          x86_64 3.8-0.rc3.1.fc42.1         fedora     825.9 KiB
 libsmartcols                      x86_64 2.40.4-2.fc42              fedora     180.4 KiB
 libssh                            x86_64 0.11.1-4.fc42              fedora     565.5 KiB
 libssh-config                     noarch 0.11.1-4.fc42              fedora     277.0   B
 libstdc++                         x86_64 15.0.1-0.3.fc42.1          fedora       2.8 MiB
 libtasn1                          x86_64 4.19.0-11.fc42             fedora     175.6 KiB
 libtirpc                          x86_64 1.3.6-1.rc3.fc42.2         fedora     199.0 KiB
 libtool-ltdl                      x86_64 2.5.4-4.fc42               fedora      70.1 KiB
 libunistring                      x86_64 1.1-9.fc42                 fedora       1.7 MiB
 libuuid                           x86_64 2.40.4-2.fc42              fedora      37.3 KiB
 libverto                          x86_64 0.3.2-10.fc42              fedora      25.4 KiB
 libxcrypt                         x86_64 4.4.38-4.fc42              fedora     268.0 KiB
 libxml2                           x86_64 2.12.9-2.fc42              fedora       1.7 MiB
 libzstd                           x86_64 1.5.6-3.fc42               fedora     795.8 KiB
 lua-libs                          x86_64 5.4.7-2.fc42               fedora     280.9 KiB
 lua-srpm-macros                   noarch 1-15.fc42                  fedora       1.3 KiB
 lz4-libs                          x86_64 1.10.0-2.fc42              fedora     157.4 KiB
 mpfr                              x86_64 4.2.1-6.fc42               fedora     831.9 KiB
 ncurses-base                      noarch 6.5-2.20240629.fc41        fedora     326.3 KiB
 ncurses-libs                      x86_64 6.5-2.20240629.fc41        fedora     975.2 KiB
 ocaml-srpm-macros                 noarch 10-4.fc42                  fedora       1.9 KiB
 openblas-srpm-macros              noarch 2-19.fc42                  fedora     112.0   B
 openldap                          x86_64 2.6.9-2.fc42               fedora     663.1 KiB
 openssl-libs                      x86_64 1:3.2.2-12.fc42            fedora       7.8 MiB
 p11-kit                           x86_64 0.25.5-5.fc42              fedora       2.2 MiB
 p11-kit-trust                     x86_64 0.25.5-5.fc42              fedora     395.5 KiB
 package-notes-srpm-macros         noarch 0.5-13.fc42                fedora       1.6 KiB
 pam                               x86_64 1.7.0-4.fc42               fedora       1.6 MiB
 pam-libs                          x86_64 1.7.0-4.fc42               fedora     126.7 KiB
 pcre2                             x86_64 10.44-1.fc42.2             fedora     649.3 KiB
 pcre2-syntax                      noarch 10.44-1.fc42.2             fedora     251.6 KiB
 perl-srpm-macros                  noarch 1-57.fc42                  fedora     861.0   B
 pkgconf                           x86_64 2.3.0-2.fc42               fedora      88.5 KiB
 pkgconf-m4                        noarch 2.3.0-2.fc42               fedora      14.4 KiB
 pkgconf-pkg-config                x86_64 2.3.0-2.fc42               fedora     989.0   B
 popt                              x86_64 1.19-8.fc42                fedora     132.8 KiB
 publicsuffix-list-dafsa           noarch 20250116-1.fc42            fedora      68.5 KiB
 pyproject-srpm-macros             noarch 1.16.4-2.fc42              fedora       1.9 KiB
 python-srpm-macros                noarch 3.13-4.fc42                fedora      51.0 KiB
 qt5-srpm-macros                   noarch 5.15.15-1.fc42             fedora     500.0   B
 qt6-srpm-macros                   noarch 6.8.1-5.fc42               fedora     456.0   B
 readline                          x86_64 8.2-12.fc42                fedora     485.0 KiB
 rpm                               x86_64 4.20.0-8.fc42              fedora       3.0 MiB
 rpm-build-libs                    x86_64 4.20.0-8.fc42              fedora     202.6 KiB
 rpm-libs                          x86_64 4.20.0-8.fc42              fedora     721.8 KiB
 rpm-sequoia                       x86_64 1.7.0-4.fc42               fedora       2.4 MiB
 rust-srpm-macros                  noarch 26.3-4.fc42                fedora       4.8 KiB
 setup                             noarch 2.15.0-10.fc42             fedora     720.7 KiB
 sqlite-libs                       x86_64 3.47.2-2.fc42              fedora       1.5 MiB
 systemd                           x86_64 257.2-14.fc42              fedora      17.4 MiB
 systemd-libs                      x86_64 257.2-14.fc42              fedora       2.2 MiB
 systemd-pam                       x86_64 257.2-14.fc42              fedora       1.1 MiB
 systemd-rpm-macros                noarch 257.2-14.fc42              fedora      10.7 KiB
 util-linux-core                   x86_64 2.40.4-2.fc42              fedora       1.4 MiB
 xxhash-libs                       x86_64 0.8.3-2.fc42               fedora      90.2 KiB
 xz-libs                           x86_64 1:5.6.3-3.fc42             fedora     218.3 KiB
 zig-srpm-macros                   noarch 1-4.fc42                   fedora       1.1 KiB
 zip                               x86_64 3.0-43.fc42                fedora     698.5 KiB
 zlib-ng-compat                    x86_64 2.2.3-2.fc42               fedora     137.6 KiB
 zstd                              x86_64 1.5.6-3.fc42               fedora       1.7 MiB
Installing groups:
 Buildsystem building group                                                              

Transaction Summary:
 Installing:       163 packages

Total size of inbound packages is 60 MiB. Need to download 60 MiB.
After this operation, 197 MiB extra will be used (install 197 MiB, remove 0 B).
[  1/163] bzip2-0:1.0.8-20.fc42.x86_64  100% | 295.8 KiB/s |  52.1 KiB |  00m00s
[  2/163] cpio-0:2.15-2.fc41.x86_64     100% |   1.1 MiB/s | 291.8 KiB |  00m00s
[  3/163] diffutils-0:3.10-9.fc42.x86_6 100% |   1.8 MiB/s | 404.6 KiB |  00m00s
[  4/163] coreutils-0:9.6-1.fc42.x86_64 100% |   1.7 MiB/s |   1.2 MiB |  00m01s
[  5/163] fedora-release-common-0:42-0. 100% | 520.9 KiB/s |  24.0 KiB |  00m00s
[  6/163] glibc-minimal-langpack-0:2.40 100% |   1.3 MiB/s | 127.0 KiB |  00m00s
[  7/163] findutils-1:4.10.0-5.fc42.x86 100% |   2.4 MiB/s | 551.5 KiB |  00m00s
[  8/163] bash-0:5.2.37-1.fc42.x86_64   100% |   1.9 MiB/s |   1.8 MiB |  00m01s
[  9/163] grep-0:3.11-10.fc42.x86_64    100% |   2.0 MiB/s | 300.1 KiB |  00m00s
[ 10/163] gzip-0:1.13-3.fc42.x86_64     100% |   1.8 MiB/s | 170.4 KiB |  00m00s
[ 11/163] info-0:7.2-3.fc42.x86_64      100% |   2.0 MiB/s | 183.8 KiB |  00m00s
[ 12/163] patch-0:2.7.6-26.fc42.x86_64  100% |   1.3 MiB/s | 128.4 KiB |  00m00s
[ 13/163] redhat-rpm-config-0:300-1.fc4 100% |   1.9 MiB/s |  82.8 KiB |  00m00s
[ 14/163] rpm-build-0:4.20.0-8.fc42.x86 100% |   1.9 MiB/s |  82.0 KiB |  00m00s
[ 15/163] sed-0:4.9-4.fc42.x86_64       100% |   2.2 MiB/s | 317.3 KiB |  00m00s
[ 16/163] unzip-0:6.0-66.fc42.x86_64    100% |   2.0 MiB/s | 184.6 KiB |  00m00s
[ 17/163] which-0:2.21-43.fc42.x86_64   100% | 979.4 KiB/s |  41.1 KiB |  00m00s
[ 18/163] tar-2:1.35-5.fc42.x86_64      100% |   2.8 MiB/s | 862.5 KiB |  00m00s
[ 19/163] xz-1:5.6.3-3.fc42.x86_64      100% |   2.7 MiB/s | 475.0 KiB |  00m00s
[ 20/163] shadow-utils-2:4.17.0-4.fc42. 100% |   2.8 MiB/s |   1.3 MiB |  00m00s
[ 21/163] gawk-0:5.3.0-4.fc41.x86_64    100% |   3.1 MiB/s |   1.1 MiB |  00m00s
[ 22/163] util-linux-0:2.40.4-2.fc42.x8 100% |   3.0 MiB/s |   1.2 MiB |  00m00s
[ 23/163] filesystem-0:3.18-36.fc42.x86 100% |   3.1 MiB/s |   1.3 MiB |  00m00s
[ 24/163] bzip2-libs-0:1.0.8-20.fc42.x8 100% |   1.0 MiB/s |  43.6 KiB |  00m00s
[ 25/163] ncurses-libs-0:6.5-2.20240629 100% |   2.5 MiB/s | 334.0 KiB |  00m00s
[ 26/163] gmp-1:6.3.0-2.fc41.x86_64     100% |   2.4 MiB/s | 318.0 KiB |  00m00s
[ 27/163] libacl-0:2.3.2-3.fc42.x86_64  100% | 547.8 KiB/s |  23.0 KiB |  00m00s
[ 28/163] libattr-0:2.5.2-5.fc42.x86_64 100% | 388.2 KiB/s |  17.1 KiB |  00m00s
[ 29/163] libcap-0:2.71-2.fc42.x86_64   100% |   1.8 MiB/s |  78.1 KiB |  00m00s
[ 30/163] libselinux-0:3.8-0.rc3.1.fc42 100% |   2.2 MiB/s |  96.9 KiB |  00m00s
[ 31/163] glibc-0:2.40.9000-31.fc42.x86 100% |   3.5 MiB/s |   2.3 MiB |  00m01s
[ 32/163] systemd-libs-0:257.2-14.fc42. 100% |   3.8 MiB/s | 820.1 KiB |  00m00s
[ 33/163] coreutils-common-0:9.6-1.fc42 100% |   3.6 MiB/s |   2.1 MiB |  00m01s
[ 34/163] fedora-repos-0:42-0.4.noarch  100% | 220.9 KiB/s |   9.3 KiB |  00m00s
[ 35/163] pcre2-0:10.44-1.fc42.2.x86_64 100% |   2.8 MiB/s | 243.4 KiB |  00m00s
[ 36/163] glibc-common-0:2.40.9000-31.f 100% |   3.2 MiB/s | 414.5 KiB |  00m00s
[ 37/163] ed-0:1.21-2.fc42.x86_64       100% |   1.9 MiB/s |  82.0 KiB |  00m00s
[ 38/163] ansible-srpm-macros-0:1-17.1. 100% | 483.7 KiB/s |  20.3 KiB |  00m00s
[ 39/163] build-reproducibility-srpm-ma 100% | 276.3 KiB/s |  11.6 KiB |  00m00s
[ 40/163] dwz-0:0.15-9.fc42.x86_64      100% |   3.1 MiB/s | 135.7 KiB |  00m00s
[ 41/163] efi-srpm-macros-0:6-2.fc42.no 100% | 536.1 KiB/s |  22.5 KiB |  00m00s
[ 42/163] filesystem-srpm-macros-0:3.18 100% | 608.7 KiB/s |  25.6 KiB |  00m00s
[ 43/163] file-0:5.45-9.fc42.x86_64     100% | 578.9 KiB/s |  48.6 KiB |  00m00s
[ 44/163] fonts-srpm-macros-1:2.0.5-20. 100% | 643.0 KiB/s |  27.0 KiB |  00m00s
[ 45/163] forge-srpm-macros-0:0.4.0-2.f 100% | 472.6 KiB/s |  19.9 KiB |  00m00s
[ 46/163] fpc-srpm-macros-0:1.3-14.fc42 100% | 186.5 KiB/s |   8.0 KiB |  00m00s
[ 47/163] ghc-srpm-macros-0:1.9.2-2.fc4 100% | 218.0 KiB/s |   9.2 KiB |  00m00s
[ 48/163] openssl-libs-1:3.2.2-12.fc42. 100% |   3.4 MiB/s |   2.3 MiB |  00m01s
[ 49/163] gnat-srpm-macros-0:6-7.fc42.n 100% | 205.0 KiB/s |   8.6 KiB |  00m00s
[ 50/163] go-srpm-macros-0:3.6.0-6.fc42 100% | 658.5 KiB/s |  27.7 KiB |  00m00s
[ 51/163] kernel-srpm-macros-0:1.0-25.f 100% | 229.6 KiB/s |   9.9 KiB |  00m00s
[ 52/163] lua-srpm-macros-0:1-15.fc42.n 100% | 212.3 KiB/s |   8.9 KiB |  00m00s
[ 53/163] ocaml-srpm-macros-0:10-4.fc42 100% | 219.2 KiB/s |   9.2 KiB |  00m00s
[ 54/163] openblas-srpm-macros-0:2-19.f 100% | 184.9 KiB/s |   7.8 KiB |  00m00s
[ 55/163] package-notes-srpm-macros-0:0 100% | 220.5 KiB/s |   9.3 KiB |  00m00s
[ 56/163] perl-srpm-macros-0:1-57.fc42. 100% | 202.5 KiB/s |   8.5 KiB |  00m00s
[ 57/163] pyproject-srpm-macros-0:1.16. 100% | 326.4 KiB/s |  14.0 KiB |  00m00s
[ 58/163] python-srpm-macros-0:3.13-4.f 100% | 547.1 KiB/s |  23.0 KiB |  00m00s
[ 59/163] qt5-srpm-macros-0:5.15.15-1.f 100% | 211.9 KiB/s |   8.9 KiB |  00m00s
[ 60/163] qt6-srpm-macros-0:6.8.1-5.fc4 100% | 222.5 KiB/s |   9.3 KiB |  00m00s
[ 61/163] rust-srpm-macros-0:26.3-4.fc4 100% | 272.2 KiB/s |  11.7 KiB |  00m00s
[ 62/163] zig-srpm-macros-0:1-4.fc42.no 100% | 196.3 KiB/s |   8.2 KiB |  00m00s
[ 63/163] debugedit-0:5.1-4.fc42.x86_64 100% |   1.8 MiB/s |  78.9 KiB |  00m00s
[ 64/163] zip-0:3.0-43.fc42.x86_64      100% |   3.0 MiB/s | 263.5 KiB |  00m00s
[ 65/163] rpm-0:4.20.0-8.fc42.x86_64    100% |   3.2 MiB/s | 545.8 KiB |  00m00s
[ 66/163] elfutils-libelf-0:0.192-8.fc4 100% |   2.4 MiB/s | 208.1 KiB |  00m00s
[ 67/163] popt-0:1.19-8.fc42.x86_64     100% |   1.5 MiB/s |  65.9 KiB |  00m00s
[ 68/163] elfutils-0:0.192-8.fc42.x86_6 100% |   3.1 MiB/s | 551.0 KiB |  00m00s
[ 69/163] libarchive-0:3.7.7-2.fc42.x86 100% |   3.2 MiB/s | 416.9 KiB |  00m00s
[ 70/163] readline-0:8.2-12.fc42.x86_64 100% |   2.5 MiB/s | 215.2 KiB |  00m00s
[ 71/163] rpm-build-libs-0:4.20.0-8.fc4 100% |   1.1 MiB/s |  98.6 KiB |  00m00s
[ 72/163] rpm-libs-0:4.20.0-8.fc42.x86_ 100% |   3.6 MiB/s | 313.7 KiB |  00m00s
[ 73/163] audit-libs-0:4.0.3-2.fc42.x86 100% |   2.8 MiB/s | 125.3 KiB |  00m00s
[ 74/163] libeconf-0:0.7.5-2.fc42.x86_6 100% | 834.9 KiB/s |  35.1 KiB |  00m00s
[ 75/163] libsemanage-0:3.8-0.rc3.1.fc4 100% |   2.8 MiB/s | 123.7 KiB |  00m00s
[ 76/163] libxcrypt-0:4.4.38-4.fc42.x86 100% |   2.7 MiB/s | 119.2 KiB |  00m00s
[ 77/163] zstd-0:1.5.6-3.fc42.x86_64    100% |   3.7 MiB/s | 479.6 KiB |  00m00s
[ 78/163] xz-libs-1:5.6.3-3.fc42.x86_64 100% |   2.6 MiB/s | 113.4 KiB |  00m00s
[ 79/163] pam-libs-0:1.7.0-4.fc42.x86_6 100% | 686.2 KiB/s |  58.3 KiB |  00m00s
[ 80/163] setup-0:2.15.0-10.fc42.noarch 100% |   1.8 MiB/s | 156.1 KiB |  00m00s
[ 81/163] libblkid-0:2.40.4-2.fc42.x86_ 100% |   2.9 MiB/s | 126.2 KiB |  00m00s
[ 82/163] libcap-ng-0:0.8.5-4.fc42.x86_ 100% | 765.9 KiB/s |  32.2 KiB |  00m00s
[ 83/163] mpfr-0:4.2.1-6.fc42.x86_64    100% |   4.0 MiB/s | 348.5 KiB |  00m00s
[ 84/163] libfdisk-0:2.40.4-2.fc42.x86_ 100% |   3.6 MiB/s | 162.3 KiB |  00m00s
[ 85/163] libsmartcols-0:2.40.4-2.fc42. 100% |   1.9 MiB/s |  84.9 KiB |  00m00s
[ 86/163] libuuid-0:2.40.4-2.fc42.x86_6 100% | 675.6 KiB/s |  29.0 KiB |  00m00s
[ 87/163] libmount-0:2.40.4-2.fc42.x86_ 100% |   1.8 MiB/s | 158.7 KiB |  00m00s
[ 88/163] zlib-ng-compat-0:2.2.3-2.fc42 100% |   1.8 MiB/s |  78.9 KiB |  00m00s
[ 89/163] basesystem-0:11-22.fc42.noarc 100% | 173.6 KiB/s |   7.3 KiB |  00m00s
[ 90/163] util-linux-core-0:2.40.4-2.fc 100% |   4.1 MiB/s | 533.1 KiB |  00m00s
[ 91/163] ncurses-base-0:6.5-2.20240629 100% |   2.0 MiB/s |  88.4 KiB |  00m00s
[ 92/163] libgcc-0:15.0.1-0.3.fc42.1.x8 100% |   1.2 MiB/s | 109.7 KiB |  00m00s
[ 93/163] libsepol-0:3.8-0.rc3.1.fc42.1 100% |   4.0 MiB/s | 348.7 KiB |  00m00s
[ 94/163] crypto-policies-0:20241128-2. 100% |   1.1 MiB/s |  98.4 KiB |  00m00s
[ 95/163] fedora-gpg-keys-0:42-0.4.noar 100% |   3.1 MiB/s | 135.6 KiB |  00m00s
[ 96/163] glibc-gconv-extra-0:2.40.9000 100% |   4.3 MiB/s |   1.7 MiB |  00m00s
[ 97/163] fedora-repos-rawhide-0:42-0.4 100% | 210.7 KiB/s |   8.9 KiB |  00m00s
[ 98/163] ca-certificates-0:2024.2.69_v 100% |   3.6 MiB/s | 949.0 KiB |  00m00s
[ 99/163] pcre2-syntax-0:10.44-1.fc42.2 100% |   1.7 MiB/s | 149.8 KiB |  00m00s
[100/163] curl-0:8.11.1-3.fc42.x86_64   100% |   2.6 MiB/s | 222.8 KiB |  00m00s
[101/163] file-libs-0:5.45-9.fc42.x86_6 100% |   4.3 MiB/s | 763.9 KiB |  00m00s
[102/163] add-determinism-0:0.5.0-2.fc4 100% |   4.2 MiB/s | 914.6 KiB |  00m00s
[103/163] elfutils-libs-0:0.192-8.fc42. 100% |   3.1 MiB/s | 265.9 KiB |  00m00s
[104/163] elfutils-debuginfod-client-0: 100% |   1.1 MiB/s |  46.5 KiB |  00m00s
[105/163] libzstd-0:1.5.6-3.fc42.x86_64 100% |   3.5 MiB/s | 311.1 KiB |  00m00s
[106/163] lz4-libs-0:1.10.0-2.fc42.x86_ 100% |   1.8 MiB/s |  78.1 KiB |  00m00s
[107/163] libxml2-0:2.12.9-2.fc42.x86_6 100% |   4.0 MiB/s | 696.0 KiB |  00m00s
[108/163] libstdc++-0:15.0.1-0.3.fc42.1 100% |   4.0 MiB/s | 887.4 KiB |  00m00s
[109/163] libgomp-0:15.0.1-0.3.fc42.1.x 100% |   3.9 MiB/s | 343.3 KiB |  00m00s
[110/163] lua-libs-0:5.4.7-2.fc42.x86_6 100% |   3.0 MiB/s | 133.0 KiB |  00m00s
[111/163] elfutils-default-yama-scope-0 100% | 299.9 KiB/s |  12.6 KiB |  00m00s
[112/163] json-c-0:0.18-2.fc42.x86_64   100% |   1.0 MiB/s |  44.9 KiB |  00m00s
[113/163] sqlite-libs-0:3.47.2-2.fc42.x 100% |   4.2 MiB/s | 734.8 KiB |  00m00s
[114/163] rpm-sequoia-0:1.7.0-4.fc42.x8 100% |   4.2 MiB/s | 911.3 KiB |  00m00s
[115/163] authselect-libs-0:1.5.0-9.fc4 100% |   2.5 MiB/s | 216.1 KiB |  00m00s
[116/163] authselect-0:1.5.0-9.fc42.x86 100% |   1.7 MiB/s | 144.6 KiB |  00m00s
[117/163] gdbm-libs-1:1.23-7.fc41.x86_6 100% | 670.2 KiB/s |  56.3 KiB |  00m00s
[118/163] pam-0:1.7.0-4.fc42.x86_64     100% |   4.2 MiB/s | 555.7 KiB |  00m00s
[119/163] libnsl2-0:2.0.1-3.fc42.x86_64 100% | 703.3 KiB/s |  29.5 KiB |  00m00s
[120/163] libpwquality-0:1.4.5-12.fc42. 100% |   2.7 MiB/s | 118.5 KiB |  00m00s
[121/163] libtirpc-0:1.3.6-1.rc3.fc42.2 100% |   2.2 MiB/s |  95.5 KiB |  00m00s
[122/163] cracklib-0:2.9.11-7.fc42.x86_ 100% |   2.1 MiB/s |  91.6 KiB |  00m00s
[123/163] libcom_err-0:1.47.2-3.fc42.x8 100% | 612.0 KiB/s |  26.9 KiB |  00m00s
[124/163] keyutils-libs-0:1.6.3-5.fc42. 100% | 716.7 KiB/s |  31.5 KiB |  00m00s
[125/163] libverto-0:0.3.2-10.fc42.x86_ 100% | 472.7 KiB/s |  20.8 KiB |  00m00s
[126/163] systemd-rpm-macros-0:257.2-14 100% | 771.2 KiB/s |  35.5 KiB |  00m00s
[127/163] krb5-libs-0:1.21.3-4.fc42.x86 100% |   4.1 MiB/s | 763.5 KiB |  00m00s
[128/163] dbus-1:1.16.0-3.fc42.x86_64   100% | 184.7 KiB/s |   7.8 KiB |  00m00s
[129/163] libseccomp-0:2.5.5-2.fc41.x86 100% |   1.6 MiB/s |  70.2 KiB |  00m00s
[130/163] dbus-broker-0:36-5.fc42.x86_6 100% |   3.6 MiB/s | 174.1 KiB |  00m00s
[131/163] systemd-pam-0:257.2-14.fc42.x 100% |   4.2 MiB/s | 417.3 KiB |  00m00s
[132/163] dbus-common-1:1.16.0-3.fc42.n 100% | 336.1 KiB/s |  14.5 KiB |  00m00s
[133/163] expat-0:2.6.4-2.fc42.x86_64   100% |   2.5 MiB/s | 114.7 KiB |  00m00s
[134/163] alternatives-0:1.31-3.fc42.x8 100% | 951.1 KiB/s |  40.9 KiB |  00m00s
[135/163] jansson-0:2.14-2.fc42.x86_64  100% |   1.1 MiB/s |  45.7 KiB |  00m00s
[136/163] pkgconf-pkg-config-0:2.3.0-2. 100% | 236.3 KiB/s |   9.9 KiB |  00m00s
[137/163] pkgconf-0:2.3.0-2.fc42.x86_64 100% |   1.0 MiB/s |  44.9 KiB |  00m00s
[138/163] pkgconf-m4-0:2.3.0-2.fc42.noa 100% | 338.9 KiB/s |  14.2 KiB |  00m00s
[139/163] libpkgconf-0:2.3.0-2.fc42.x86 100% | 913.5 KiB/s |  38.4 KiB |  00m00s
[140/163] gdbm-1:1.23-7.fc41.x86_64     100% |   1.6 MiB/s | 151.8 KiB |  00m00s
[141/163] libffi-0:3.4.6-5.fc42.x86_64  100% | 928.7 KiB/s |  39.9 KiB |  00m00s
[142/163] p11-kit-0:0.25.5-5.fc42.x86_6 100% |   3.7 MiB/s | 491.7 KiB |  00m00s
[143/163] libtasn1-0:4.19.0-11.fc42.x86 100% |   1.1 MiB/s |  74.5 KiB |  00m00s
[144/163] p11-kit-trust-0:0.25.5-5.fc42 100% |   2.9 MiB/s | 132.6 KiB |  00m00s
[145/163] fedora-release-0:42-0.13.noar 100% | 261.6 KiB/s |  13.1 KiB |  00m00s
[146/163] systemd-0:257.2-14.fc42.x86_6 100% |   5.1 MiB/s |   5.9 MiB |  00m01s
[147/163] xxhash-libs-0:0.8.3-2.fc42.x8 100% | 908.5 KiB/s |  39.1 KiB |  00m00s
[148/163] fedora-release-identity-basic 100% | 315.6 KiB/s |  13.9 KiB |  00m00s
[149/163] libcurl-0:8.11.1-3.fc42.x86_6 100% |   4.3 MiB/s | 376.9 KiB |  00m00s
[150/163] binutils-0:2.43.50-12.fc42.x8 100% |   4.8 MiB/s |   5.8 MiB |  00m01s
[151/163] libbrotli-0:1.1.0-6.fc42.x86_ 100% |   3.8 MiB/s | 339.8 KiB |  00m00s
[152/163] libidn2-0:2.3.7-3.fc42.x86_64 100% |   2.6 MiB/s | 118.0 KiB |  00m00s
[153/163] libnghttp2-0:1.64.0-1.fc42.x8 100% |   1.7 MiB/s |  77.4 KiB |  00m00s
[154/163] libpsl-0:0.21.5-5.fc42.x86_64 100% |   1.5 MiB/s |  64.0 KiB |  00m00s
[155/163] libssh-0:0.11.1-4.fc42.x86_64 100% |   5.1 MiB/s | 233.3 KiB |  00m00s
[156/163] openldap-0:2.6.9-2.fc42.x86_6 100% |   3.0 MiB/s | 259.5 KiB |  00m00s
[157/163] libunistring-0:1.1-9.fc42.x86 100% |   4.2 MiB/s | 542.5 KiB |  00m00s
[158/163] libssh-config-0:0.11.1-4.fc42 100% | 214.4 KiB/s |   9.0 KiB |  00m00s
[159/163] publicsuffix-list-dafsa-0:202 100% | 653.7 KiB/s |  58.8 KiB |  00m00s
[160/163] gdb-minimal-0:15.2-7.fc42.x86 100% |   5.4 MiB/s |   4.4 MiB |  00m01s
[161/163] libevent-0:2.1.12-15.fc42.x86 100% |   3.0 MiB/s | 260.2 KiB |  00m00s
[162/163] libtool-ltdl-0:2.5.4-4.fc42.x 100% | 822.1 KiB/s |  36.2 KiB |  00m00s
[163/163] cyrus-sasl-lib-0:2.1.28-28.fc 100% |   5.7 MiB/s | 762.7 KiB |  00m00s
--------------------------------------------------------------------------------
[163/163] Total                         100% |   8.6 MiB/s |  60.0 MiB |  00m07s
Running transaction
Importing OpenPGP key 0x31645531:
 UserID     : "Fedora (43) <fedora-43-primary@fedoraproject.org>"
 Fingerprint: C6E7F081CF80E13146676E88829B606631645531
 From       : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-43-primary
The key was successfully imported.
Importing OpenPGP key 0x105EF944:
 UserID     : "Fedora (42) <fedora-42-primary@fedoraproject.org>"
 Fingerprint: B0F4950458F69E1150C6C5EDC8AC4916105EF944
 From       : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-42-primary
The key was successfully imported.
Importing OpenPGP key 0x6D9F90A6:
 UserID     : "Fedora (44) <fedora-44-primary@fedoraproject.org>"
 Fingerprint: 36F612DCF27F7D1A48A835E4DBFCF71C6D9F90A6
 From       : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-44-primary
The key was successfully imported.
[  1/165] Verify package files          100% | 615.0   B/s | 163.0   B |  00m00s
[  2/165] Prepare transaction           100% |   1.3 KiB/s | 163.0   B |  00m00s
[  3/165] Installing libgcc-0:15.0.1-0. 100% |  88.6 MiB/s | 272.3 KiB |  00m00s
[  4/165] Installing libssh-config-0:0. 100% | 796.9 KiB/s | 816.0   B |  00m00s
[  5/165] Installing publicsuffix-list- 100% |  67.6 MiB/s |  69.2 KiB |  00m00s
[  6/165] Installing fedora-release-ide 100% |   0.0   B/s | 976.0   B |  00m00s
[  7/165] Installing fedora-repos-rawhi 100% |   2.4 MiB/s |   2.4 KiB |  00m00s
[  8/165] Installing fedora-gpg-keys-0: 100% |  13.1 MiB/s | 174.8 KiB |  00m00s
[  9/165] Installing fedora-repos-0:42- 100% |   5.6 MiB/s |   5.7 KiB |  00m00s
[ 10/165] Installing fedora-release-com 100% |   7.9 MiB/s |  24.1 KiB |  00m00s
[ 11/165] Installing fedora-release-0:4 100% |   0.0   B/s | 124.0   B |  00m00s
[ 12/165] Installing setup-0:2.15.0-10. 100% |  30.8 MiB/s | 726.5 KiB |  00m00s
>>> [RPM] /etc/hosts created as /etc/hosts.rpmnew
[ 13/165] Installing filesystem-0:3.18- 100% |   1.2 MiB/s | 212.4 KiB |  00m00s
[ 14/165] Installing basesystem-0:11-22 100% |   0.0   B/s | 124.0   B |  00m00s
[ 15/165] Installing pkgconf-m4-0:2.3.0 100% |  14.5 MiB/s |  14.8 KiB |  00m00s
[ 16/165] Installing pcre2-syntax-0:10. 100% | 124.1 MiB/s | 254.1 KiB |  00m00s
[ 17/165] Installing ncurses-base-0:6.5 100% |  28.6 MiB/s | 351.7 KiB |  00m00s
[ 18/165] Installing glibc-minimal-lang 100% | 121.1 KiB/s | 124.0   B |  00m00s
[ 19/165] Installing ncurses-libs-0:6.5 100% | 119.9 MiB/s | 981.8 KiB |  00m00s
[ 20/165] Installing glibc-0:2.40.9000- 100% | 135.8 MiB/s |   6.7 MiB |  00m00s
[ 21/165] Installing bash-0:5.2.37-1.fc 100% | 185.7 MiB/s |   8.2 MiB |  00m00s
[ 22/165] Installing glibc-common-0:2.4 100% |  46.4 MiB/s |   1.0 MiB |  00m00s
[ 23/165] Installing glibc-gconv-extra- 100% | 132.9 MiB/s |   7.3 MiB |  00m00s
[ 24/165] Installing zlib-ng-compat-0:2 100% | 135.2 MiB/s | 138.4 KiB |  00m00s
[ 25/165] Installing bzip2-libs-0:1.0.8 100% |  83.7 MiB/s |  85.7 KiB |  00m00s
[ 26/165] Installing xz-libs-1:5.6.3-3. 100% | 107.1 MiB/s | 219.4 KiB |  00m00s
[ 27/165] Installing popt-0:1.19-8.fc42 100% |  27.2 MiB/s | 139.4 KiB |  00m00s
[ 28/165] Installing readline-0:8.2-12. 100% | 158.6 MiB/s | 487.1 KiB |  00m00s
[ 29/165] Installing libxcrypt-0:4.4.38 100% | 132.2 MiB/s | 270.7 KiB |  00m00s
[ 30/165] Installing libuuid-0:2.40.4-2 100% |  37.5 MiB/s |  38.4 KiB |  00m00s
[ 31/165] Installing libblkid-0:2.40.4- 100% |  85.7 MiB/s | 263.4 KiB |  00m00s
[ 32/165] Installing gmp-1:6.3.0-2.fc41 100% | 198.6 MiB/s | 813.7 KiB |  00m00s
[ 33/165] Installing libstdc++-0:15.0.1 100% | 256.7 MiB/s |   2.8 MiB |  00m00s
[ 34/165] Installing libzstd-0:1.5.6-3. 100% | 194.6 MiB/s | 797.0 KiB |  00m00s
[ 35/165] Installing elfutils-libelf-0: 100% | 234.0 MiB/s |   1.2 MiB |  00m00s
[ 36/165] Installing libattr-0:2.5.2-5. 100% |  27.4 MiB/s |  28.1 KiB |  00m00s
[ 37/165] Installing libacl-0:2.3.2-3.f 100% |  38.2 MiB/s |  39.2 KiB |  00m00s
[ 38/165] Installing libeconf-0:0.7.5-2 100% |  68.5 MiB/s |  70.1 KiB |  00m00s
[ 39/165] Installing libcap-ng-0:0.8.5- 100% |  36.5 MiB/s |  74.8 KiB |  00m00s
[ 40/165] Installing audit-libs-0:4.0.3 100% | 115.0 MiB/s | 353.4 KiB |  00m00s
[ 41/165] Installing pam-libs-0:1.7.0-4 100% |  63.1 MiB/s | 129.1 KiB |  00m00s
[ 42/165] Installing libcap-0:2.71-2.fc 100% |  13.1 MiB/s | 228.3 KiB |  00m00s
[ 43/165] Installing systemd-libs-0:257 100% | 224.4 MiB/s |   2.2 MiB |  00m00s
[ 44/165] Installing gdbm-libs-1:1.23-7 100% |  60.3 MiB/s | 123.6 KiB |  00m00s
[ 45/165] Installing dwz-0:0.15-9.fc42. 100% |  19.0 MiB/s | 292.4 KiB |  00m00s
[ 46/165] Installing mpfr-0:4.2.1-6.fc4 100% | 162.8 MiB/s | 833.6 KiB |  00m00s
[ 47/165] Installing gawk-0:5.3.0-4.fc4 100% |  72.2 MiB/s |   1.7 MiB |  00m00s
[ 48/165] Installing libfdisk-0:2.40.4- 100% | 121.6 MiB/s | 373.5 KiB |  00m00s
[ 49/165] Installing unzip-0:6.0-66.fc4 100% |  24.0 MiB/s | 393.8 KiB |  00m00s
[ 50/165] Installing file-libs-0:5.45-9 100% | 432.1 MiB/s |   9.9 MiB |  00m00s
[ 51/165] Installing file-0:5.45-9.fc42 100% |   3.0 MiB/s | 104.8 KiB |  00m00s
[ 52/165] Installing crypto-policies-0: 100% |  13.3 MiB/s | 163.7 KiB |  00m00s
[ 53/165] Installing pcre2-0:10.44-1.fc 100% | 105.9 MiB/s | 650.7 KiB |  00m00s
[ 54/165] Installing grep-0:3.11-10.fc4 100% |  41.8 MiB/s |   1.0 MiB |  00m00s
[ 55/165] Installing xz-1:5.6.3-3.fc42. 100% |  49.2 MiB/s |   1.2 MiB |  00m00s
[ 56/165] Installing libsmartcols-0:2.4 100% |  88.6 MiB/s | 181.4 KiB |  00m00s
[ 57/165] Installing libsepol-0:3.8-0.r 100% | 201.9 MiB/s | 826.9 KiB |  00m00s
[ 58/165] Installing libselinux-0:3.8-0 100% |  94.9 MiB/s | 194.3 KiB |  00m00s
[ 59/165] Installing sed-0:4.9-4.fc42.x 100% |  40.2 MiB/s | 865.5 KiB |  00m00s
[ 60/165] Installing findutils-1:4.10.0 100% |  74.9 MiB/s |   1.9 MiB |  00m00s
[ 61/165] Installing libmount-0:2.40.4- 100% | 116.3 MiB/s | 357.2 KiB |  00m00s
[ 62/165] Installing util-linux-core-0: 100% |  54.9 MiB/s |   1.4 MiB |  00m00s
[ 63/165] Installing lz4-libs-0:1.10.0- 100% |  77.4 MiB/s | 158.5 KiB |  00m00s
[ 64/165] Installing lua-libs-0:5.4.7-2 100% | 137.7 MiB/s | 282.1 KiB |  00m00s
[ 65/165] Installing libcom_err-0:1.47. 100% |  66.6 MiB/s |  68.2 KiB |  00m00s
[ 66/165] Installing alternatives-0:1.3 100% |   4.4 MiB/s |  67.7 KiB |  00m00s
[ 67/165] Installing libffi-0:3.4.6-5.f 100% |  81.7 MiB/s |  83.7 KiB |  00m00s
[ 68/165] Installing libtasn1-0:4.19.0- 100% |  86.6 MiB/s | 177.4 KiB |  00m00s
[ 69/165] Installing p11-kit-0:0.25.5-5 100% |  75.3 MiB/s |   2.2 MiB |  00m00s
[ 70/165] Installing libunistring-0:1.1 100% | 215.8 MiB/s |   1.7 MiB |  00m00s
[ 71/165] Installing libidn2-0:2.3.7-3. 100% |  65.4 MiB/s | 335.0 KiB |  00m00s
[ 72/165] Installing libpsl-0:0.21.5-5. 100% |  75.7 MiB/s |  77.5 KiB |  00m00s
[ 73/165] Installing p11-kit-trust-0:0. 100% |  10.2 MiB/s | 397.2 KiB |  00m00s
[ 74/165] Installing zstd-0:1.5.6-3.fc4 100% |  80.7 MiB/s |   1.7 MiB |  00m00s
[ 75/165] Installing tar-2:1.35-5.fc42. 100% | 105.8 MiB/s |   3.0 MiB |  00m00s
[ 76/165] Installing libsemanage-0:3.8- 100% |  75.7 MiB/s | 310.2 KiB |  00m00s
[ 77/165] Installing shadow-utils-2:4.1 100% |  82.0 MiB/s |   4.0 MiB |  00m00s
[ 78/165] Installing zip-0:3.0-43.fc42. 100% |  40.3 MiB/s | 702.4 KiB |  00m00s
[ 79/165] Installing gdbm-1:1.23-7.fc41 100% |  26.8 MiB/s | 465.8 KiB |  00m00s
[ 80/165] Installing cyrus-sasl-lib-0:2 100% |  99.6 MiB/s |   2.3 MiB |  00m00s
[ 81/165] Installing libxml2-0:2.12.9-2 100% |  81.3 MiB/s |   1.7 MiB |  00m00s
[ 82/165] Installing bzip2-0:1.0.8-20.f 100% |   6.8 MiB/s | 103.8 KiB |  00m00s
[ 83/165] Installing add-determinism-0: 100% | 111.7 MiB/s |   2.5 MiB |  00m00s
[ 84/165] Installing build-reproducibil 100% |   1.0 MiB/s |   1.0 KiB |  00m00s
[ 85/165] Installing sqlite-libs-0:3.47 100% | 214.9 MiB/s |   1.5 MiB |  00m00s
[ 86/165] Installing ed-0:1.21-2.fc42.x 100% |   9.7 MiB/s | 148.8 KiB |  00m00s
[ 87/165] Installing patch-0:2.7.6-26.f 100% |  18.1 MiB/s | 260.2 KiB |  00m00s
[ 88/165] Installing filesystem-srpm-ma 100% |  38.0 MiB/s |  38.9 KiB |  00m00s
[ 89/165] Installing elfutils-default-y 100% | 113.5 KiB/s |   2.0 KiB |  00m00s
[ 90/165] Installing elfutils-libs-0:0. 100% | 165.2 MiB/s | 676.7 KiB |  00m00s
[ 91/165] Installing dbus-common-1:1.16 100% | 677.5 KiB/s |  13.6 KiB |  00m00s
[ 92/165] Installing cpio-0:2.15-2.fc41 100% |  47.8 MiB/s |   1.1 MiB |  00m00s
[ 93/165] Installing diffutils-0:3.10-9 100% |  69.1 MiB/s |   1.6 MiB |  00m00s
[ 94/165] Installing libgomp-0:15.0.1-0 100% | 176.0 MiB/s | 540.7 KiB |  00m00s
[ 95/165] Installing json-c-0:0.18-2.fc 100% |  85.9 MiB/s |  88.0 KiB |  00m00s
[ 96/165] Installing keyutils-libs-0:1. 100% |  58.3 MiB/s |  59.7 KiB |  00m00s
[ 97/165] Installing libverto-0:0.3.2-1 100% |  26.6 MiB/s |  27.2 KiB |  00m00s
[ 98/165] Installing libseccomp-0:2.5.5 100% |  85.5 MiB/s | 175.2 KiB |  00m00s
[ 99/165] Installing expat-0:2.6.4-2.fc 100% |   6.4 MiB/s | 294.9 KiB |  00m00s
[100/165] Installing dbus-broker-0:36-5 100% |  10.5 MiB/s | 397.6 KiB |  00m00s
[101/165] Installing dbus-1:1.16.0-3.fc 100% |   0.0   B/s | 124.0   B |  00m00s
[102/165] Installing jansson-0:2.14-2.f 100% |  46.1 MiB/s |  94.4 KiB |  00m00s
[103/165] Installing libpkgconf-0:2.3.0 100% |  77.4 MiB/s |  79.2 KiB |  00m00s
[104/165] Installing pkgconf-0:2.3.0-2. 100% |   5.9 MiB/s |  91.0 KiB |  00m00s
[105/165] Installing pkgconf-pkg-config 100% | 136.4 KiB/s |   1.8 KiB |  00m00s
[106/165] Installing xxhash-libs-0:0.8. 100% |  44.7 MiB/s |  91.6 KiB |  00m00s
[107/165] Installing libbrotli-0:1.1.0- 100% | 205.9 MiB/s | 843.6 KiB |  00m00s
[108/165] Installing libnghttp2-0:1.64. 100% |  85.7 MiB/s | 175.6 KiB |  00m00s
[109/165] Installing libtool-ltdl-0:2.5 100% |  69.6 MiB/s |  71.2 KiB |  00m00s
[110/165] Installing rust-srpm-macros-0 100% |   0.0   B/s |   5.6 KiB |  00m00s
[111/165] Installing qt6-srpm-macros-0: 100% |   0.0   B/s | 732.0   B |  00m00s
[112/165] Installing qt5-srpm-macros-0: 100% |   0.0   B/s | 776.0   B |  00m00s
[113/165] Installing perl-srpm-macros-0 100% |   0.0   B/s |   1.1 KiB |  00m00s
[114/165] Installing package-notes-srpm 100% |   0.0   B/s |   2.0 KiB |  00m00s
[115/165] Installing openblas-srpm-macr 100% |   0.0   B/s | 392.0   B |  00m00s
[116/165] Installing ocaml-srpm-macros- 100% |   0.0   B/s |   2.2 KiB |  00m00s
[117/165] Installing kernel-srpm-macros 100% |   0.0   B/s |   2.3 KiB |  00m00s
[118/165] Installing gnat-srpm-macros-0 100% |   0.0   B/s |   1.3 KiB |  00m00s
[119/165] Installing ghc-srpm-macros-0: 100% |   0.0   B/s |   1.0 KiB |  00m00s
[120/165] Installing fpc-srpm-macros-0: 100% |   0.0   B/s | 420.0   B |  00m00s
[121/165] Installing ansible-srpm-macro 100% |  35.4 MiB/s |  36.2 KiB |  00m00s
[122/165] Installing coreutils-common-0 100% | 237.3 MiB/s |  11.2 MiB |  00m00s
[123/165] Installing openssl-libs-1:3.2 100% | 290.2 MiB/s |   7.8 MiB |  00m00s
[124/165] Installing coreutils-0:9.6-1. 100% |  92.5 MiB/s |   5.5 MiB |  00m00s
[125/165] Installing ca-certificates-0: 100% |   1.1 MiB/s |   2.4 MiB |  00m02s
[126/165] Installing krb5-libs-0:1.21.3 100% | 166.2 MiB/s |   2.3 MiB |  00m00s
[127/165] Installing libarchive-0:3.7.7 100% | 183.7 MiB/s | 940.6 KiB |  00m00s
[128/165] Installing libtirpc-0:1.3.6-1 100% |  98.0 MiB/s | 200.7 KiB |  00m00s
[129/165] Installing gzip-0:1.13-3.fc42 100% |  22.9 MiB/s | 398.4 KiB |  00m00s
[130/165] Installing authselect-libs-0: 100% |  81.5 MiB/s | 835.0 KiB |  00m00s
[131/165] Installing cracklib-0:2.9.11- 100% |  11.8 MiB/s | 253.7 KiB |  00m00s
[132/165] Installing libpwquality-0:1.4 100% |  18.7 MiB/s | 421.6 KiB |  00m00s
[133/165] Installing libnsl2-0:2.0.1-3. 100% |  28.8 MiB/s |  59.0 KiB |  00m00s
[134/165] Installing pam-0:1.7.0-4.fc42 100% |  43.5 MiB/s |   1.7 MiB |  00m00s
[135/165] Installing util-linux-0:2.40. 100% |  54.9 MiB/s |   3.5 MiB |  00m00s
[136/165] Installing systemd-pam-0:257. 100% | 123.6 MiB/s |   1.1 MiB |  00m00s
[137/165] Installing systemd-0:257.2-14 100% |  58.1 MiB/s |  17.5 MiB |  00m00s
>>> Running post-install scriptlet: systemd-0:257.2-14.fc42.x86_64
>>> Finished post-install scriptlet: systemd-0:257.2-14.fc42.x86_64
>>> Scriptlet output:
>>> Creating group 'systemd-journal' with GID 190.
>>> Creating group 'systemd-oom' with GID 999.
>>> Creating user 'systemd-oom' (systemd Userspace OOM Killer) with UID 999 and 
>>> 
[138/165] Installing libssh-0:0.11.1-4. 100% | 138.6 MiB/s | 567.5 KiB |  00m00s
[139/165] Installing rpm-sequoia-0:1.7. 100% | 241.4 MiB/s |   2.4 MiB |  00m00s
[140/165] Installing rpm-libs-0:4.20.0- 100% | 176.6 MiB/s | 723.3 KiB |  00m00s
[141/165] Installing rpm-build-libs-0:4 100% |  99.3 MiB/s | 203.4 KiB |  00m00s
[142/165] Installing libevent-0:2.1.12- 100% | 177.1 MiB/s | 906.9 KiB |  00m00s
[143/165] Installing openldap-0:2.6.9-2 100% | 130.3 MiB/s | 666.9 KiB |  00m00s
[144/165] Installing libcurl-0:8.11.1-3 100% | 205.8 MiB/s | 843.1 KiB |  00m00s
[145/165] Installing elfutils-debuginfo 100% |   5.3 MiB/s |  86.2 KiB |  00m00s
[146/165] Installing elfutils-0:0.192-8 100% | 103.3 MiB/s |   2.7 MiB |  00m00s
[147/165] Installing binutils-0:2.43.50 100% | 210.2 MiB/s |  25.9 MiB |  00m00s
[148/165] Installing gdb-minimal-0:15.2 100% | 221.1 MiB/s |  13.0 MiB |  00m00s
[149/165] Installing debugedit-0:5.1-4. 100% |  12.4 MiB/s | 203.1 KiB |  00m00s
[150/165] Installing curl-0:8.11.1-3.fc 100% |  11.4 MiB/s | 457.1 KiB |  00m00s
[151/165] Installing rpm-0:4.20.0-8.fc4 100% |  56.5 MiB/s |   2.5 MiB |  00m00s
[152/165] Installing efi-srpm-macros-0: 100% |  40.1 MiB/s |  41.1 KiB |  00m00s
[153/165] Installing lua-srpm-macros-0: 100% |   1.9 MiB/s |   1.9 KiB |  00m00s
[154/165] Installing zig-srpm-macros-0: 100% |   1.6 MiB/s |   1.7 KiB |  00m00s
[155/165] Installing fonts-srpm-macros- 100% |  55.7 MiB/s |  57.0 KiB |  00m00s
[156/165] Installing forge-srpm-macros- 100% |  39.3 MiB/s |  40.3 KiB |  00m00s
[157/165] Installing go-srpm-macros-0:3 100% |  60.5 MiB/s |  62.0 KiB |  00m00s
[158/165] Installing python-srpm-macros 100% |  50.9 MiB/s |  52.2 KiB |  00m00s
[159/165] Installing redhat-rpm-config- 100% |  47.2 MiB/s | 193.5 KiB |  00m00s
[160/165] Installing rpm-build-0:4.20.0 100% |   8.9 MiB/s | 173.7 KiB |  00m00s
[161/165] Installing pyproject-srpm-mac 100% |   2.4 MiB/s |   2.5 KiB |  00m00s
[162/165] Installing authselect-0:1.5.0 100% |   9.2 MiB/s | 160.4 KiB |  00m00s
[163/165] Installing which-0:2.21-43.fc 100% |   5.4 MiB/s |  82.3 KiB |  00m00s
[164/165] Installing info-0:7.2-3.fc42. 100% |  21.9 MiB/s | 358.3 KiB |  00m00s
[165/165] Installing systemd-rpm-macros 100% |   3.9 KiB/s |  11.3 KiB |  00m03s
Public key "file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-43-primary" is already present, not importing.
Complete!
Finish: installing minimal buildroot with dnf5
Start: creating root cache
Finish: creating root cache
Finish: chroot init
INFO: Installed packages:
INFO: add-determinism-0.5.0-2.fc42.x86_64
alternatives-1.31-3.fc42.x86_64
ansible-srpm-macros-1-17.1.fc42.noarch
audit-libs-4.0.3-2.fc42.x86_64
authselect-1.5.0-9.fc42.x86_64
authselect-libs-1.5.0-9.fc42.x86_64
basesystem-11-22.fc42.noarch
bash-5.2.37-1.fc42.x86_64
binutils-2.43.50-12.fc42.x86_64
build-reproducibility-srpm-macros-0.5.0-2.fc42.noarch
bzip2-1.0.8-20.fc42.x86_64
bzip2-libs-1.0.8-20.fc42.x86_64
ca-certificates-2024.2.69_v8.0.401-5.fc42.noarch
coreutils-9.6-1.fc42.x86_64
coreutils-common-9.6-1.fc42.x86_64
cpio-2.15-2.fc41.x86_64
cracklib-2.9.11-7.fc42.x86_64
crypto-policies-20241128-2.gitbb7b0b0.fc42.noarch
curl-8.11.1-3.fc42.x86_64
cyrus-sasl-lib-2.1.28-28.fc42.x86_64
dbus-1.16.0-3.fc42.x86_64
dbus-broker-36-5.fc42.x86_64
dbus-common-1.16.0-3.fc42.noarch
debugedit-5.1-4.fc42.x86_64
diffutils-3.10-9.fc42.x86_64
dwz-0.15-9.fc42.x86_64
ed-1.21-2.fc42.x86_64
efi-srpm-macros-6-2.fc42.noarch
elfutils-0.192-8.fc42.x86_64
elfutils-debuginfod-client-0.192-8.fc42.x86_64
elfutils-default-yama-scope-0.192-8.fc42.noarch
elfutils-libelf-0.192-8.fc42.x86_64
elfutils-libs-0.192-8.fc42.x86_64
expat-2.6.4-2.fc42.x86_64
fedora-gpg-keys-42-0.4.noarch
fedora-release-42-0.13.noarch
fedora-release-common-42-0.13.noarch
fedora-release-identity-basic-42-0.13.noarch
fedora-repos-42-0.4.noarch
fedora-repos-rawhide-42-0.4.noarch
file-5.45-9.fc42.x86_64
file-libs-5.45-9.fc42.x86_64
filesystem-3.18-36.fc42.x86_64
filesystem-srpm-macros-3.18-36.fc42.noarch
findutils-4.10.0-5.fc42.x86_64
fonts-srpm-macros-2.0.5-20.fc42.noarch
forge-srpm-macros-0.4.0-2.fc42.noarch
fpc-srpm-macros-1.3-14.fc42.noarch
gawk-5.3.0-4.fc41.x86_64
gdb-minimal-15.2-7.fc42.x86_64
gdbm-1.23-7.fc41.x86_64
gdbm-libs-1.23-7.fc41.x86_64
ghc-srpm-macros-1.9.2-2.fc42.noarch
glibc-2.40.9000-31.fc42.x86_64
glibc-common-2.40.9000-31.fc42.x86_64
glibc-gconv-extra-2.40.9000-31.fc42.x86_64
glibc-minimal-langpack-2.40.9000-31.fc42.x86_64
gmp-6.3.0-2.fc41.x86_64
gnat-srpm-macros-6-7.fc42.noarch
go-srpm-macros-3.6.0-6.fc42.noarch
gpg-pubkey-105ef944-65ca83d1
gpg-pubkey-31645531-66b6dccf
gpg-pubkey-6d9f90a6-6786af3b
grep-3.11-10.fc42.x86_64
gzip-1.13-3.fc42.x86_64
info-7.2-3.fc42.x86_64
jansson-2.14-2.fc42.x86_64
json-c-0.18-2.fc42.x86_64
kernel-srpm-macros-1.0-25.fc42.noarch
keyutils-libs-1.6.3-5.fc42.x86_64
krb5-libs-1.21.3-4.fc42.x86_64
libacl-2.3.2-3.fc42.x86_64
libarchive-3.7.7-2.fc42.x86_64
libattr-2.5.2-5.fc42.x86_64
libblkid-2.40.4-2.fc42.x86_64
libbrotli-1.1.0-6.fc42.x86_64
libcap-2.71-2.fc42.x86_64
libcap-ng-0.8.5-4.fc42.x86_64
libcom_err-1.47.2-3.fc42.x86_64
libcurl-8.11.1-3.fc42.x86_64
libeconf-0.7.5-2.fc42.x86_64
libevent-2.1.12-15.fc42.x86_64
libfdisk-2.40.4-2.fc42.x86_64
libffi-3.4.6-5.fc42.x86_64
libgcc-15.0.1-0.3.fc42.1.x86_64
libgomp-15.0.1-0.3.fc42.1.x86_64
libidn2-2.3.7-3.fc42.x86_64
libmount-2.40.4-2.fc42.x86_64
libnghttp2-1.64.0-1.fc42.x86_64
libnsl2-2.0.1-3.fc42.x86_64
libpkgconf-2.3.0-2.fc42.x86_64
libpsl-0.21.5-5.fc42.x86_64
libpwquality-1.4.5-12.fc42.x86_64
libseccomp-2.5.5-2.fc41.x86_64
libselinux-3.8-0.rc3.1.fc42.3.x86_64
libsemanage-3.8-0.rc3.1.fc42.1.x86_64
libsepol-3.8-0.rc3.1.fc42.1.x86_64
libsmartcols-2.40.4-2.fc42.x86_64
libssh-0.11.1-4.fc42.x86_64
libssh-config-0.11.1-4.fc42.noarch
libstdc++-15.0.1-0.3.fc42.1.x86_64
libtasn1-4.19.0-11.fc42.x86_64
libtirpc-1.3.6-1.rc3.fc42.2.x86_64
libtool-ltdl-2.5.4-4.fc42.x86_64
libunistring-1.1-9.fc42.x86_64
libuuid-2.40.4-2.fc42.x86_64
libverto-0.3.2-10.fc42.x86_64
libxcrypt-4.4.38-4.fc42.x86_64
libxml2-2.12.9-2.fc42.x86_64
libzstd-1.5.6-3.fc42.x86_64
lua-libs-5.4.7-2.fc42.x86_64
lua-srpm-macros-1-15.fc42.noarch
lz4-libs-1.10.0-2.fc42.x86_64
mpfr-4.2.1-6.fc42.x86_64
ncurses-base-6.5-2.20240629.fc41.noarch
ncurses-libs-6.5-2.20240629.fc41.x86_64
ocaml-srpm-macros-10-4.fc42.noarch
openblas-srpm-macros-2-19.fc42.noarch
openldap-2.6.9-2.fc42.x86_64
openssl-libs-3.2.2-12.fc42.x86_64
p11-kit-0.25.5-5.fc42.x86_64
p11-kit-trust-0.25.5-5.fc42.x86_64
package-notes-srpm-macros-0.5-13.fc42.noarch
pam-1.7.0-4.fc42.x86_64
pam-libs-1.7.0-4.fc42.x86_64
patch-2.7.6-26.fc42.x86_64
pcre2-10.44-1.fc42.2.x86_64
pcre2-syntax-10.44-1.fc42.2.noarch
perl-srpm-macros-1-57.fc42.noarch
pkgconf-2.3.0-2.fc42.x86_64
pkgconf-m4-2.3.0-2.fc42.noarch
pkgconf-pkg-config-2.3.0-2.fc42.x86_64
popt-1.19-8.fc42.x86_64
publicsuffix-list-dafsa-20250116-1.fc42.noarch
pyproject-srpm-macros-1.16.4-2.fc42.noarch
python-srpm-macros-3.13-4.fc42.noarch
qt5-srpm-macros-5.15.15-1.fc42.noarch
qt6-srpm-macros-6.8.1-5.fc42.noarch
readline-8.2-12.fc42.x86_64
redhat-rpm-config-300-1.fc42.noarch
rpm-4.20.0-8.fc42.x86_64
rpm-build-4.20.0-8.fc42.x86_64
rpm-build-libs-4.20.0-8.fc42.x86_64
rpm-libs-4.20.0-8.fc42.x86_64
rpm-sequoia-1.7.0-4.fc42.x86_64
rust-srpm-macros-26.3-4.fc42.noarch
sed-4.9-4.fc42.x86_64
setup-2.15.0-10.fc42.noarch
shadow-utils-4.17.0-4.fc42.x86_64
sqlite-libs-3.47.2-2.fc42.x86_64
systemd-257.2-14.fc42.x86_64
systemd-libs-257.2-14.fc42.x86_64
systemd-pam-257.2-14.fc42.x86_64
systemd-rpm-macros-257.2-14.fc42.noarch
tar-1.35-5.fc42.x86_64
unzip-6.0-66.fc42.x86_64
util-linux-2.40.4-2.fc42.x86_64
util-linux-core-2.40.4-2.fc42.x86_64
which-2.21-43.fc42.x86_64
xxhash-libs-0.8.3-2.fc42.x86_64
xz-5.6.3-3.fc42.x86_64
xz-libs-5.6.3-3.fc42.x86_64
zig-srpm-macros-1-4.fc42.noarch
zip-3.0-43.fc42.x86_64
zlib-ng-compat-2.2.3-2.fc42.x86_64
zstd-1.5.6-3.fc42.x86_64
Start: buildsrpm
Start: rpmbuild -bs
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1737676800
Wrote: /builddir/build/SRPMS/python-geoserver-rest-2.9.1-1.fc42.src.rpm
Finish: rpmbuild -bs
INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan
INFO: /var/lib/mock/fedora-rawhide-x86_64-1737681006.461301/root/var/log/dnf5.log
INFO: chroot_scan: creating tarball /var/lib/copr-rpmbuild/results/chroot_scan.tar.gz
/bin/tar: Removing leading `/' from member names
Finish: buildsrpm
INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-ca6smwzs/python-geoserver-rest/python-geoserver-rest.spec) Config(child) 0 minutes 44 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_success=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
INFO: Start(/var/lib/copr-rpmbuild/results/python-geoserver-rest-2.9.1-1.fc42.src.rpm)  Config(fedora-rawhide-x86_64)
Start(bootstrap): chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1737681006.461301/root.
INFO: reusing tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1737681006.461301/root.
INFO: calling preinit hooks
INFO: enabled root cache
INFO: enabled package manager cache
Start(bootstrap): cleaning package manager metadata
Finish(bootstrap): cleaning package manager metadata
Finish(bootstrap): chroot init
Start: chroot init
INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1737681006.461301/root.
INFO: calling preinit hooks
INFO: enabled root cache
Start: unpacking root cache
Finish: unpacking root cache
INFO: enabled package manager cache
Start: cleaning package manager metadata
Finish: cleaning package manager metadata
INFO: enabled HW Info plugin
INFO: Buildroot is handled by package management downloaded with a bootstrap image:
  rpm-4.20.0-1.fc42.x86_64
  rpm-sequoia-1.7.0-3.fc42.x86_64
  dnf5-5.2.8.1-2.fc42.x86_64
  dnf5-plugins-5.2.8.1-2.fc42.x86_64
Finish: chroot init
Start: build phase for python-geoserver-rest-2.9.1-1.fc42.src.rpm
Start: build setup for python-geoserver-rest-2.9.1-1.fc42.src.rpm
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1737676800
Wrote: /builddir/build/SRPMS/python-geoserver-rest-2.9.1-1.fc42.src.rpm
Updating and loading repositories:
 fedora                                 100% | 174.0 KiB/s |   6.4 KiB |  00m00s
 Copr repository                        100% |   3.8 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package                 Arch   Version        Repository      Size
Installing:
 python3-devel          x86_64 3.13.1-3.fc42  fedora       1.8 MiB
Installing dependencies:
 libb2                  x86_64 0.98.1-13.fc42 fedora      46.1 KiB
 mpdecimal              x86_64 2.5.1-17.fc42  fedora     200.8 KiB
 pyproject-rpm-macros   noarch 1.16.4-2.fc42  fedora     113.0 KiB
 python-pip-wheel       noarch 24.3.1-2.fc42  fedora       1.2 MiB
 python-rpm-macros      noarch 3.13-4.fc42    fedora      22.1 KiB
 python3                x86_64 3.13.1-3.fc42  fedora      27.6 KiB
 python3-libs           x86_64 3.13.1-3.fc42  fedora      39.9 MiB
 python3-packaging      noarch 24.2-3.fc42    fedora     555.7 KiB
 python3-rpm-generators noarch 14-12.fc42     fedora      81.7 KiB
 python3-rpm-macros     noarch 3.13-4.fc42    fedora       6.4 KiB
 tzdata                 noarch 2024b-2.fc42   fedora       1.6 MiB

Transaction Summary:
 Installing:        12 packages

Total size of inbound packages is 12 MiB. Need to download 12 MiB.
After this operation, 46 MiB extra will be used (install 46 MiB, remove 0 B).
[ 1/12] libb2-0:0.98.1-13.fc42.x86_64   100% | 192.3 KiB/s |  25.4 KiB |  00m00s
[ 2/12] mpdecimal-0:2.5.1-17.fc42.x86_6 100% | 669.7 KiB/s |  90.4 KiB |  00m00s
[ 3/12] python3-devel-0:3.13.1-3.fc42.x 100% |   1.0 MiB/s | 403.2 KiB |  00m00s
[ 4/12] tzdata-0:2024b-2.fc42.noarch    100% |   2.3 MiB/s | 713.0 KiB |  00m00s
[ 5/12] python3-0:3.13.1-3.fc42.x86_64  100% | 582.5 KiB/s |  28.0 KiB |  00m00s
[ 6/12] pyproject-rpm-macros-0:1.16.4-2 100% | 949.1 KiB/s |  44.6 KiB |  00m00s
[ 7/12] python-pip-wheel-0:24.3.1-2.fc4 100% |   2.1 MiB/s |   1.2 MiB |  00m01s
[ 8/12] python-rpm-macros-0:3.13-4.fc42 100% | 360.2 KiB/s |  16.9 KiB |  00m00s
[ 9/12] python3-rpm-macros-0:3.13-4.fc4 100% | 249.0 KiB/s |  11.7 KiB |  00m00s
[10/12] python3-rpm-generators-0:14-12. 100% | 608.0 KiB/s |  29.2 KiB |  00m00s
[11/12] python3-packaging-0:24.2-3.fc42 100% |   1.6 MiB/s | 154.0 KiB |  00m00s
[12/12] python3-libs-0:3.13.1-3.fc42.x8 100% |   3.1 MiB/s |   9.2 MiB |  00m03s
--------------------------------------------------------------------------------
[12/12] Total                           100% |   3.9 MiB/s |  11.9 MiB |  00m03s
Running transaction
[ 1/14] Verify package files            100% | 300.0   B/s |  12.0   B |  00m00s
[ 2/14] Prepare transaction             100% | 230.0   B/s |  12.0   B |  00m00s
[ 3/14] Installing python-rpm-macros-0: 100% |  22.3 MiB/s |  22.8 KiB |  00m00s
[ 4/14] Installing python3-rpm-macros-0 100% |   0.0   B/s |   6.7 KiB |  00m00s
[ 5/14] Installing pyproject-rpm-macros 100% |  22.5 MiB/s | 115.0 KiB |  00m00s
[ 6/14] Installing tzdata-0:2024b-2.fc4 100% |  23.8 MiB/s |   1.9 MiB |  00m00s
[ 7/14] Installing python-pip-wheel-0:2 100% | 414.7 MiB/s |   1.2 MiB |  00m00s
[ 8/14] Installing mpdecimal-0:2.5.1-17 100% |  98.6 MiB/s | 201.9 KiB |  00m00s
[ 9/14] Installing libb2-0:0.98.1-13.fc 100% |   7.7 MiB/s |  47.2 KiB |  00m00s
[10/14] Installing python3-libs-0:3.13. 100% | 175.0 MiB/s |  40.2 MiB |  00m00s
[11/14] Installing python3-0:3.13.1-3.f 100% |   1.7 MiB/s |  29.4 KiB |  00m00s
[12/14] Installing python3-packaging-0: 100% |  92.5 MiB/s | 568.0 KiB |  00m00s
[13/14] Installing python3-rpm-generato 100% |  40.5 MiB/s |  82.9 KiB |  00m00s
[14/14] Installing python3-devel-0:3.13 100% |  26.3 MiB/s |   1.8 MiB |  00m00s
Complete!
Finish: build setup for python-geoserver-rest-2.9.1-1.fc42.src.rpm
Start: rpmbuild python-geoserver-rest-2.9.1-1.fc42.src.rpm
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1737676800
Executing(%mkbuilddir): /bin/sh -e /var/tmp/rpm-tmp.Ux7yJ8
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ test -d /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ /usr/bin/rm -rf /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ /usr/bin/mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ /usr/bin/mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/SPECPARTS
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9ybvz8
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ rm -rf geoserver_rest-2.9.1
+ /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/geoserver_rest-2.9.1.tar.gz
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd geoserver_rest-2.9.1
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.4dRvaD
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ cd geoserver_rest-2.9.1
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ '[' -f setup.py ']'
+ echo 'python3dist(setuptools) >= 40.8'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ RPM_TOXENV=py313
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir --output /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires -x all,dev,style
Handling setuptools >= 40.8 from default build backend
Requirement not satisfied: setuptools >= 40.8
Exiting dependency generation pass: build backend
+ cat /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires
+ rm -rfv '*.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/python-geoserver-rest-2.9.1-1.fc42.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 Copr repository                        100% |  44.0 KiB/s |   1.5 KiB |  00m00s
 fedora                                 100% | 207.7 KiB/s |   6.4 KiB |  00m00s
Repositories loaded.
Package "pyproject-rpm-macros-1.16.4-2.fc42.noarch" is already installed.
Package "python3-devel-3.13.1-3.fc42.x86_64" is already installed.
Package "python3-packaging-24.2-3.fc42.noarch" is already installed.

Package             Arch   Version       Repository      Size
Installing:
 python3-pip        noarch 24.3.1-2.fc42 fedora      11.3 MiB
 python3-setuptools noarch 74.1.3-5.fc42 fedora       8.4 MiB

Transaction Summary:
 Installing:         2 packages

Total size of inbound packages is 5 MiB. Need to download 5 MiB.
After this operation, 20 MiB extra will be used (install 20 MiB, remove 0 B).
[1/2] python3-setuptools-0:74.1.3-5.fc4 100% |  19.4 MiB/s |   2.0 MiB |  00m00s
[2/2] python3-pip-0:24.3.1-2.fc42.noarc 100% |  22.9 MiB/s |   2.7 MiB |  00m00s
--------------------------------------------------------------------------------
[2/2] Total                             100% |  32.1 MiB/s |   4.7 MiB |  00m00s
Running transaction
[1/4] Verify package files              100% | 133.0   B/s |   2.0   B |  00m00s
[2/4] Prepare transaction               100% |  55.0   B/s |   2.0   B |  00m00s
[3/4] Installing python3-setuptools-0:7 100% | 107.0 MiB/s |   8.6 MiB |  00m00s
[4/4] Installing python3-pip-0:24.3.1-2 100% |  81.8 MiB/s |  11.6 MiB |  00m00s
Complete!
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1737676800
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.UZyGCc
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ cd geoserver_rest-2.9.1
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ '[' -f setup.py ']'
+ echo 'python3dist(setuptools) >= 40.8'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ RPM_TOXENV=py313
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir --output /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires -x all,dev,style
Handling setuptools >= 40.8 from default build backend
Requirement satisfied: setuptools >= 40.8
   (installed: setuptools 74.1.3)
running egg_info
writing geoserver_rest.egg-info/PKG-INFO
writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
writing requirements to geoserver_rest.egg-info/requires.txt
writing top-level names to geoserver_rest.egg-info/top_level.txt
file geoserver-rest-python.py (for module geoserver-rest-python) not found
reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
running dist_info
writing geoserver_rest.egg-info/PKG-INFO
writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
writing requirements to geoserver_rest.egg-info/requires.txt
writing top-level names to geoserver_rest.egg-info/top_level.txt
file geoserver-rest-python.py (for module geoserver-rest-python) not found
reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
creating '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/geoserver_rest-2.9.1.dist-info'
Handling pygments from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: pygments
Handling requests from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: requests
Handling xmltodict from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: xmltodict
Handling matplotlib ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: matplotlib ; extra == 'all'
Handling seaborn ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: seaborn ; extra == 'all'
Handling gdal ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: gdal ; extra == 'all'
Handling pytest ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: pytest ; extra == 'dev'
Handling black ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: black ; extra == 'dev'
Handling flake8 ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: flake8 ; extra == 'dev'
Handling sphinx >=1.7 ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: sphinx >=1.7 ; extra == 'dev'
Handling pre-commit ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: pre-commit ; extra == 'dev'
Handling matplotlib ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: matplotlib ; extra == 'style'
Handling seaborn ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: seaborn ; extra == 'style'
Handling gdal ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement not satisfied: gdal ; extra == 'style'
+ cat /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires
+ rm -rfv geoserver_rest-2.9.1.dist-info/
removed 'geoserver_rest-2.9.1.dist-info/top_level.txt'
removed 'geoserver_rest-2.9.1.dist-info/METADATA'
removed 'geoserver_rest-2.9.1.dist-info/LICENSE'
removed directory 'geoserver_rest-2.9.1.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/python-geoserver-rest-2.9.1-1.fc42.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 fedora                                 100% | 201.2 KiB/s |   6.4 KiB |  00m00s
 Copr repository                        100% |  25.7 KiB/s |   1.5 KiB |  00m00s
Repositories loaded.
Package "pyproject-rpm-macros-1.16.4-2.fc42.noarch" is already installed.
Package "python3-devel-3.13.1-3.fc42.x86_64" is already installed.
Package "python3-packaging-24.2-3.fc42.noarch" is already installed.
Package "python3-pip-24.3.1-2.fc42.noarch" is already installed.
Package "python3-setuptools-74.1.3-5.fc42.noarch" is already installed.

Package                         Arch   Version                Repository      Size
Installing:
 black                          noarch 24.4.2-3.fc42          fedora       1.9 MiB
 pre-commit                     noarch 4.1.0-1.fc42           fedora     780.5 KiB
 python3-flake8                 noarch 6.1.0-5.fc42           fedora     437.2 KiB
 python3-gdal                   x86_64 3.10.1-2.fc42          fedora       6.6 MiB
 python3-matplotlib             x86_64 3.10.0-1.fc42          fedora      22.3 MiB
 python3-pygments               noarch 2.19.1-1.fc42          copr_base    8.1 MiB
 python3-pytest                 noarch 8.3.4-2.fc42           fedora      20.8 MiB
 python3-requests               noarch 2.32.3-4.fc42          fedora     483.1 KiB
 python3-seaborn                noarch 0.13.2-3.fc41          fedora       2.3 MiB
 python3-sphinx                 noarch 1:8.1.3-2.fc42         fedora      11.1 MiB
 python3-xmltodict              noarch 0.13.0-6.fc42          fedora      55.2 KiB
Installing dependencies:
 abattis-cantarell-vf-fonts     noarch 0.301-14.fc42          fedora     192.7 KiB
 abseil-cpp                     x86_64 20240722.0-4.fc42      fedora       2.5 MiB
 armadillo                      x86_64 12.8.1-6.fc42          fedora      82.6 KiB
 arpack                         x86_64 3.9.1-6.fc42           fedora     646.0 KiB
 blosc                          x86_64 1.21.6-6.fc42          fedora     126.2 KiB
 boost-program-options          x86_64 1.83.0-11.fc42         fedora     280.7 KiB
 cairo                          x86_64 1.18.2-3.fc42          fedora       1.8 MiB
 cfitsio                        x86_64 4.5.0-5.fc42           fedora       1.8 MiB
 default-fonts-core-sans        noarch 4.2-3.fc42             fedora      11.9 KiB
 dejavu-sans-fonts              noarch 2.37-25.fc42           fedora       5.5 MiB
 flexiblas                      x86_64 3.4.4-7.fc42           fedora      48.5 KiB
 flexiblas-netlib               x86_64 3.4.4-7.fc42           fedora      10.6 MiB
 flexiblas-netlib64             x86_64 3.4.4-7.fc42           fedora      10.7 MiB
 flexiblas-openblas-openmp      x86_64 3.4.4-7.fc42           fedora      43.2 KiB
 flexiblas-openblas-openmp64    x86_64 3.4.4-7.fc42           fedora      43.2 KiB
 fontconfig                     x86_64 2.15.0-9.fc42          fedora     794.5 KiB
 fonts-filesystem               noarch 1:2.0.5-20.fc42        fedora       0.0   B
 freetype                       x86_64 2.13.3-2.fc42          fedora     858.2 KiB
 freexl                         x86_64 2.0.0-13.fc42          fedora      93.3 KiB
 fribidi                        x86_64 1.0.16-2.fc42          fedora     194.3 KiB
 gdal-libs                      x86_64 3.10.1-2.fc42          fedora      30.0 MiB
 geos                           x86_64 3.13.0-1.fc42          fedora       3.9 MiB
 giflib                         x86_64 5.2.2-3.fc42           fedora     116.1 KiB
 glib2                          x86_64 2.83.2-3.fc42          fedora      14.7 MiB
 gnupg2                         x86_64 2.4.7-1.fc42           fedora       9.8 MiB
 gnutls                         x86_64 3.8.8-2.fc42           fedora       3.3 MiB
 google-noto-fonts-common       noarch 20250101-2.fc42        fedora      17.7 KiB
 google-noto-sans-vf-fonts      noarch 20250101-2.fc42        fedora       1.4 MiB
 gpgme                          x86_64 1.24.1-1.fc42          fedora     590.7 KiB
 gpgmepp                        x86_64 1.24.1-1.fc42          fedora     429.1 KiB
 graphite2                      x86_64 1.3.14-16.fc41         fedora     192.0 KiB
 harfbuzz                       x86_64 10.2.0-2.fc42          fedora       2.7 MiB
 hdf-libs                       x86_64 4.3.0-3.fc42           fedora     687.1 KiB
 hdf5                           x86_64 1.14.5-2.fc42          fedora       7.1 MiB
 imath                          x86_64 3.1.12-2.fc42          fedora     383.7 KiB
 jbigkit-libs                   x86_64 2.1-31.fc42            fedora     121.4 KiB
 lcms2                          x86_64 2.16-5.fc42            fedora     437.7 KiB
 libX11                         x86_64 1.8.10-3.fc42          fedora       1.3 MiB
 libX11-common                  noarch 1.8.10-3.fc42          fedora       1.1 MiB
 libXau                         x86_64 1.0.12-2.fc42          fedora      76.9 KiB
 libXext                        x86_64 1.3.6-3.fc42           fedora      90.0 KiB
 libXrender                     x86_64 0.9.12-2.fc42          fedora      50.0 KiB
 libaec                         x86_64 1.1.3-2.fc42           fedora      97.9 KiB
 libarrow                       x86_64 18.0.0-4.fc42          fedora      24.3 MiB
 libarrow-acero-libs            x86_64 18.0.0-4.fc42          fedora       1.4 MiB
 libarrow-dataset-libs          x86_64 18.0.0-4.fc42          fedora       1.5 MiB
 libarrow-doc                   noarch 18.0.0-4.fc42          fedora     115.7 KiB
 libassuan                      x86_64 2.5.7-3.fc42           fedora     167.8 KiB
 libdeflate                     x86_64 1.23-2.fc42            fedora     122.7 KiB
 libgcrypt                      x86_64 1.11.0-5.fc42          fedora       1.6 MiB
 libgeotiff                     x86_64 1.7.3-4.fc42           fedora     319.2 KiB
 libgfortran                    x86_64 15.0.1-0.3.fc42.1      fedora       3.3 MiB
 libgpg-error                   x86_64 1.51-2.fc42            fedora     894.1 KiB
 libgta                         x86_64 1.2.1-15.fc42          fedora      70.1 KiB
 libicu                         x86_64 76.1-3.fc42            fedora      36.3 MiB
 libimagequant                  x86_64 4.0.3-6.fc42           fedora     696.3 KiB
 libjpeg-turbo                  x86_64 3.1.0-2.fc42           fedora     803.2 KiB
 libkml                         x86_64 1.3.0-51.fc42          fedora       1.2 MiB
 libksba                        x86_64 1.6.7-3.fc42           fedora     402.5 KiB
 liblerc                        x86_64 4.0.0-8.fc42           fedora     636.1 KiB
 liborc2                        x86_64 2.0.3-3.fc42           fedora       1.7 MiB
 libpng                         x86_64 2:1.6.44-2.fc42        fedora     241.7 KiB
 libpq                          x86_64 16.4-1.fc42            fedora     965.4 KiB
 libqhull_r                     x86_64 1:8.0.2-6.fc42         fedora     483.3 KiB
 libquadmath                    x86_64 15.0.1-0.3.fc42.1      fedora     321.9 KiB
 libraqm                        x86_64 0.10.1-2.fc42          fedora      28.6 KiB
 librttopo                      x86_64 1.1.0-16.fc42          fedora     504.7 KiB
 libspatialite                  x86_64 5.1.0-9.fc42           fedora      15.3 MiB
 libtiff                        x86_64 4.7.0-3.fc42           fedora     619.1 KiB
 libusb1                        x86_64 1.0.27-8.fc42          fedora     166.5 KiB
 libwebp                        x86_64 1.5.0-2.fc42           fedora     947.6 KiB
 libxcb                         x86_64 1.17.0-5.fc42          fedora       1.1 MiB
 libyaml                        x86_64 0.2.5-16.fc42          fedora     134.7 KiB
 libzip                         x86_64 1.11.3-1.fc42          fedora     135.8 KiB
 mariadb-connector-c            x86_64 3.4.3-1.fc42           fedora     533.1 KiB
 mariadb-connector-c-config     noarch 3.4.3-1.fc42           fedora     497.0   B
 minizip-ng-compat              x86_64 4.0.8-3.fc42           fedora     158.5 KiB
 netcdf                         x86_64 4.9.2-8.fc42           fedora       2.3 MiB
 nettle                         x86_64 3.10-6.fc42            fedora     789.7 KiB
 npth                           x86_64 1.8-2.fc42             fedora      49.6 KiB
 nspr                           x86_64 4.36.0-3.fc42          fedora     315.5 KiB
 nss                            x86_64 3.107.0-2.fc42         fedora       1.9 MiB
 nss-softokn                    x86_64 3.107.0-2.fc42         fedora       1.9 MiB
 nss-softokn-freebl             x86_64 3.107.0-2.fc42         fedora     848.3 KiB
 nss-sysinit                    x86_64 3.107.0-2.fc42         fedora      18.1 KiB
 nss-util                       x86_64 3.107.0-2.fc42         fedora     204.8 KiB
 ogdi                           x86_64 4.1.1-2.fc41           fedora     801.1 KiB
 openblas                       x86_64 0.3.28-3.fc42          fedora     106.6 KiB
 openblas-openmp                x86_64 0.3.28-3.fc42          fedora      39.1 MiB
 openblas-openmp64              x86_64 0.3.28-3.fc42          fedora      39.2 MiB
 openexr-libs                   x86_64 3.2.4-3.fc41           fedora       6.5 MiB
 openjpeg                       x86_64 2.5.3-6.fc42           fedora     451.8 KiB
 parquet-libs                   x86_64 18.0.0-4.fc42          fedora       3.3 MiB
 pixman                         x86_64 0.44.2-2.fc42          fedora     674.2 KiB
 poppler                        x86_64 24.08.0-2.fc42         fedora       3.6 MiB
 poppler-data                   noarch 0.4.11-9.fc42          fedora      12.3 MiB
 proj                           x86_64 9.5.1-2.fc42           fedora       4.5 MiB
 proj-data                      noarch 9.5.1-2.fc42           fedora       9.1 MiB
 protobuf                       x86_64 3.19.6-10.fc41         fedora       3.3 MiB
 python-setuptools-wheel        noarch 74.1.3-5.fc42          fedora       1.2 MiB
 python-wheel-wheel             noarch 1:0.45.1-3.fc42        fedora      71.6 KiB
 python3-babel                  noarch 2.16.0-3.fc42          fedora      28.3 MiB
 python3-cairo                  x86_64 1.25.1-6.fc42          fedora     492.5 KiB
 python3-cfgv                   noarch 3.4.0-9.fc42           fedora      49.0 KiB
 python3-charset-normalizer     noarch 3.4.1-3.fc42           fedora     319.6 KiB
 python3-click                  noarch 8.1.8-1.fc42           copr_base    1.0 MiB
 python3-contourpy              x86_64 1.3.1-2.fc42           fedora     816.9 KiB
 python3-cycler                 noarch 0.11.0-15.fc42         fedora      37.2 KiB
 python3-dateutil               noarch 1:2.8.2-17.fc42        fedora     876.2 KiB
 python3-distlib                noarch 0.3.9-2.fc42           fedora       1.2 MiB
 python3-docutils               noarch 0.21.2-2.fc42          fedora       4.9 MiB
 python3-filelock               noarch 3.15.4-5.fc42          fedora      89.6 KiB
 python3-fonttools              x86_64 4.55.4-1.fc42          fedora      18.1 MiB
 python3-husl                   noarch 4.0.3-33.fc42          fedora      20.4 KiB
 python3-identify               noarch 2.6.6-1.fc42           copr_base  723.9 KiB
 python3-idna                   noarch 3.10-2.fc42            fedora     628.0 KiB
 python3-imagesize              noarch 1.4.1-10.fc42          fedora      35.3 KiB
 python3-iniconfig              noarch 1.1.1-25.fc42          fedora      20.6 KiB
 python3-jinja2                 noarch 3.1.5-2.fc42           fedora       2.9 MiB
 python3-kiwisolver             x86_64 1.4.8-2.fc42           fedora     149.7 KiB
 python3-markupsafe             x86_64 3.0.2-2.fc42           fedora      55.8 KiB
 python3-matplotlib-data        noarch 3.10.0-1.fc42          fedora     742.7 KiB
 python3-matplotlib-data-fonts  noarch 3.10.0-1.fc42          fedora       7.9 MiB
 python3-mccabe                 noarch 0.7.0-11.fc42          fedora      38.5 KiB
 python3-mypy_extensions        noarch 1.0.0-9.fc42           fedora      17.2 KiB
 python3-nodeenv                noarch 1.9.1-4.fc42           fedora     214.9 KiB
 python3-numpy                  x86_64 1:2.2.1-2.fc42         fedora      40.8 MiB
 python3-numpy-f2py             x86_64 1:2.2.1-2.fc42         fedora       2.0 MiB
 python3-numpydoc               noarch 1.8.0-2.fc42           fedora     652.9 KiB
 python3-olefile                noarch 0.47-6.fc42            fedora     339.5 KiB
 python3-pandas                 x86_64 2.2.3-1.fc42~bootstrap fedora      42.2 MiB
 python3-pathspec               noarch 0.12.1-8.fc42          fedora     194.7 KiB
 python3-pillow                 x86_64 11.1.0-2.fc42          fedora       3.9 MiB
 python3-platformdirs           noarch 4.2.2-4.fc42           fedora     162.0 KiB
 python3-pluggy                 noarch 1.5.0-2.fc42           fedora     192.7 KiB
 python3-pycodestyle            noarch 2.12.1-3.fc42          fedora     364.2 KiB
 python3-pyflakes               noarch 3.1.0-4.fc42           fedora     346.4 KiB
 python3-pyparsing              noarch 3.2.1-1.fc42           copr_base  851.7 KiB
 python3-pytz                   noarch 2024.2-2.fc42          fedora     222.1 KiB
 python3-pyyaml                 x86_64 6.0.2-2.fc42           fedora     781.0 KiB
 python3-six                    noarch 1.17.0-2.fc42          fedora     116.9 KiB
 python3-snowballstemmer        noarch 2.2.0-15.fc42          fedora       1.7 MiB
 python3-sphinx-theme-alabaster noarch 0.7.16-6.fc41          fedora      41.9 KiB
 python3-tabulate               noarch 0.9.0-11.fc42          fedora     341.1 KiB
 python3-urllib3                noarch 2.3.0-2.fc42           fedora       1.0 MiB
 python3-virtualenv             noarch 20.29.1-1.fc42         fedora     652.1 KiB
 re2                            x86_64 1:20240702-28.fc42     fedora     566.0 KiB
 snappy                         x86_64 1.2.1-4.fc42           fedora      71.3 KiB
 thrift                         x86_64 0.20.0-3.fc41          fedora       4.8 MiB
 tpm2-tss                       x86_64 4.1.3-6.fc42           fedora       1.6 MiB
 unixODBC                       x86_64 2.3.12-6.fc42          fedora       1.0 MiB
 uriparser                      x86_64 0.9.8-3.fc42           fedora     137.7 KiB
 utf8proc                       x86_64 2.9.0-2.fc42           fedora     366.6 KiB
 xerces-c                       x86_64 3.3.0-7.fc42           fedora       3.8 MiB
 xml-common                     noarch 0.6.3-66.fc42          fedora      78.4 KiB

Transaction Summary:
 Installing:       166 packages

Total size of inbound packages is 139 MiB. Need to download 139 MiB.
After this operation, 598 MiB extra will be used (install 598 MiB, remove 0 B).
[  1/166] black-0:24.4.2-3.fc42.noarch  100% |   6.5 MiB/s | 428.2 KiB |  00m00s
[  2/166] python3-gdal-0:3.10.1-2.fc42. 100% |   8.4 MiB/s |   1.3 MiB |  00m00s
[  3/166] python3-flake8-0:6.1.0-5.fc42 100% | 956.4 KiB/s | 149.2 KiB |  00m00s
[  4/166] python3-requests-0:2.32.3-4.f 100% |   1.7 MiB/s | 159.6 KiB |  00m00s
[  5/166] python3-seaborn-0:0.13.2-3.fc 100% |  12.2 MiB/s | 623.2 KiB |  00m00s
[  6/166] python3-xmltodict-0:0.13.0-6. 100% |   1.2 MiB/s |  26.3 KiB |  00m00s
[  7/166] python3-matplotlib-0:3.10.0-1 100% |  17.6 MiB/s |   4.9 MiB |  00m00s
[  8/166] python3-mypy_extensions-0:1.0 100% |   1.8 MiB/s |  16.6 KiB |  00m00s
[  9/166] python3-pathspec-0:0.12.1-8.f 100% |   2.2 MiB/s |  61.7 KiB |  00m00s
[ 10/166] python3-sphinx-1:8.1.3-2.fc42 100% |  53.4 MiB/s |   2.7 MiB |  00m00s
[ 11/166] python3-platformdirs-0:4.2.2- 100% |   5.0 MiB/s |  46.5 KiB |  00m00s
[ 12/166] python3-pygments-0:2.19.1-1.f 100% |   6.2 MiB/s |   1.9 MiB |  00m00s
[ 13/166] python3-numpy-1:2.2.1-2.fc42. 100% |  25.4 MiB/s |   7.9 MiB |  00m00s
[ 14/166] gdal-libs-0:3.10.1-2.fc42.x86 100% |  27.5 MiB/s |   9.8 MiB |  00m00s
[ 15/166] dejavu-sans-fonts-0:2.37-25.f 100% |   2.9 MiB/s |   1.3 MiB |  00m00s
[ 16/166] freetype-0:2.13.3-2.fc42.x86_ 100% | 998.7 KiB/s | 415.5 KiB |  00m00s
[ 17/166] libqhull_r-1:8.0.2-6.fc42.x86 100% | 525.0 KiB/s | 202.6 KiB |  00m00s
[ 18/166] python3-cycler-0:0.11.0-15.fc 100% |   1.4 MiB/s |  21.5 KiB |  00m00s
[ 19/166] python3-contourpy-0:1.3.1-2.f 100% |   8.6 MiB/s | 281.4 KiB |  00m00s
[ 20/166] python3-dateutil-1:2.8.2-17.f 100% |  10.0 MiB/s | 359.9 KiB |  00m00s
[ 21/166] python3-kiwisolver-0:1.4.8-2. 100% | 708.6 KiB/s |  68.7 KiB |  00m00s
[ 22/166] python3-fonttools-0:4.55.4-1. 100% |  26.4 MiB/s |   3.0 MiB |  00m00s
[ 23/166] python3-matplotlib-data-0:3.1 100% |   3.6 MiB/s | 526.2 KiB |  00m00s
[ 24/166] python3-mccabe-0:0.7.0-11.fc4 100% | 352.5 KiB/s |  22.6 KiB |  00m00s
[ 25/166] python3-pyflakes-0:3.1.0-4.fc 100% |   1.2 MiB/s |  91.9 KiB |  00m00s
[ 26/166] python3-charset-normalizer-0: 100% |   1.4 MiB/s | 108.4 KiB |  00m00s
[ 27/166] python3-idna-0:3.10-2.fc42.no 100% |   1.5 MiB/s | 117.3 KiB |  00m00s
[ 28/166] python3-husl-0:4.0.3-33.fc42. 100% | 317.3 KiB/s |  18.4 KiB |  00m00s
[ 29/166] python3-numpydoc-0:1.8.0-2.fc 100% |   2.1 MiB/s | 166.7 KiB |  00m00s
[ 30/166] python3-pandas-0:2.2.3-1.fc42 100% |  10.5 MiB/s |   8.0 MiB |  00m01s
[ 31/166] python3-babel-0:2.16.0-3.fc42 100% |   7.3 MiB/s |   6.5 MiB |  00m01s
[ 32/166] python3-imagesize-0:1.4.1-10. 100% | 161.9 KiB/s |  22.0 KiB |  00m00s
[ 33/166] python3-docutils-0:0.21.2-2.f 100% |   1.3 MiB/s |   1.1 MiB |  00m01s
[ 34/166] python3-sphinx-theme-alabaste 100% |   2.6 MiB/s |  24.3 KiB |  00m00s
[ 35/166] armadillo-0:12.8.1-6.fc42.x86 100% |   3.0 MiB/s |  27.3 KiB |  00m00s
[ 36/166] python3-snowballstemmer-0:2.2 100% |  12.0 MiB/s | 258.7 KiB |  00m00s
[ 37/166] freexl-0:2.0.0-13.fc42.x86_64 100% |   5.0 MiB/s |  46.2 KiB |  00m00s
[ 38/166] cfitsio-0:4.5.0-5.fc42.x86_64 100% |  19.8 MiB/s | 609.4 KiB |  00m00s
[ 39/166] giflib-0:5.2.2-3.fc42.x86_64  100% |   3.2 MiB/s |  52.1 KiB |  00m00s
[ 40/166] geos-0:3.13.0-1.fc42.x86_64   100% |  25.1 MiB/s |   1.2 MiB |  00m00s
[ 41/166] hdf5-0:1.14.5-2.fc42.x86_64   100% |  34.8 MiB/s |   2.1 MiB |  00m00s
[ 42/166] imath-0:3.1.12-2.fc42.x86_64  100% |   1.7 MiB/s | 101.8 KiB |  00m00s
[ 43/166] libaec-0:1.1.3-2.fc42.x86_64  100% |   1.1 MiB/s |  37.3 KiB |  00m00s
[ 44/166] libarrow-dataset-libs-0:18.0. 100% |  16.2 MiB/s | 513.8 KiB |  00m00s
[ 45/166] libdeflate-0:1.23-2.fc42.x86_ 100% |   2.2 MiB/s |  69.7 KiB |  00m00s
[ 46/166] libarrow-0:18.0.0-4.fc42.x86_ 100% |  62.0 MiB/s |   5.8 MiB |  00m00s
[ 47/166] libgta-0:1.2.1-15.fc42.x86_64 100% | 582.6 KiB/s |  36.1 KiB |  00m00s
[ 48/166] libgeotiff-0:1.7.3-4.fc42.x86 100% |   1.4 MiB/s | 100.6 KiB |  00m00s
[ 49/166] libjpeg-turbo-0:3.1.0-2.fc42. 100% |  11.0 MiB/s | 236.2 KiB |  00m00s
[ 50/166] libkml-0:1.3.0-51.fc42.x86_64 100% |  13.6 MiB/s | 363.3 KiB |  00m00s
[ 51/166] liblerc-0:4.0.0-8.fc42.x86_64 100% |   9.6 MiB/s | 216.7 KiB |  00m00s
[ 52/166] libpng-2:1.6.44-2.fc42.x86_64 100% |   4.0 MiB/s | 123.9 KiB |  00m00s
[ 53/166] libpq-0:16.4-1.fc42.x86_64    100% |   4.3 MiB/s | 249.4 KiB |  00m00s
[ 54/166] libspatialite-0:5.1.0-9.fc42. 100% |  23.2 MiB/s |   3.1 MiB |  00m00s
[ 55/166] libtiff-0:4.7.0-3.fc42.x86_64 100% |   1.9 MiB/s | 220.4 KiB |  00m00s
[ 56/166] libwebp-0:1.5.0-2.fc42.x86_64 100% |   3.3 MiB/s | 320.6 KiB |  00m00s
[ 57/166] mariadb-connector-c-0:3.4.3-1 100% |   5.7 MiB/s | 202.6 KiB |  00m00s
[ 58/166] netcdf-0:4.9.2-8.fc42.x86_64  100% |  12.2 MiB/s | 823.0 KiB |  00m00s
[ 59/166] ogdi-0:4.1.1-2.fc41.x86_64    100% |   2.7 MiB/s | 235.4 KiB |  00m00s
[ 60/166] openexr-libs-0:3.2.4-3.fc41.x 100% |   8.1 MiB/s |   1.1 MiB |  00m00s
[ 61/166] openjpeg-0:2.5.3-6.fc42.x86_6 100% |   1.8 MiB/s | 192.8 KiB |  00m00s
[ 62/166] parquet-libs-0:18.0.0-4.fc42. 100% |   7.9 MiB/s |   1.0 MiB |  00m00s
[ 63/166] poppler-0:24.08.0-2.fc42.x86_ 100% |   7.8 MiB/s |   1.2 MiB |  00m00s
[ 64/166] proj-0:9.5.1-2.fc42.x86_64    100% |   7.7 MiB/s |   1.6 MiB |  00m00s
[ 65/166] unixODBC-0:2.3.12-6.fc42.x86_ 100% |   2.6 MiB/s | 415.0 KiB |  00m00s
[ 66/166] xerces-c-0:3.3.0-7.fc42.x86_6 100% |   9.1 MiB/s |   1.0 MiB |  00m00s
[ 67/166] python3-numpy-f2py-1:2.2.1-2. 100% |   3.6 MiB/s | 491.0 KiB |  00m00s
[ 68/166] fonts-filesystem-1:2.0.5-20.f 100% |  74.1 KiB/s |   8.5 KiB |  00m00s
[ 69/166] flexiblas-netlib-0:3.4.4-7.fc 100% |  12.4 MiB/s |   3.2 MiB |  00m00s
[ 70/166] harfbuzz-0:10.2.0-2.fc42.x86_ 100% |   5.7 MiB/s |   1.0 MiB |  00m00s
[ 71/166] python3-tabulate-0:0.9.0-11.f 100% | 632.7 KiB/s |  71.5 KiB |  00m00s
[ 72/166] python3-matplotlib-data-fonts 100% |  12.2 MiB/s |   2.3 MiB |  00m00s
[ 73/166] arpack-0:3.9.1-6.fc42.x86_64  100% |   3.1 MiB/s | 207.8 KiB |  00m00s
[ 74/166] minizip-ng-compat-0:4.0.8-3.f 100% |   3.6 MiB/s |  66.7 KiB |  00m00s
[ 75/166] libarrow-doc-0:18.0.0-4.fc42. 100% |   1.2 MiB/s |  28.8 KiB |  00m00s
[ 76/166] libgfortran-0:15.0.1-0.3.fc42 100% |  23.5 MiB/s | 937.5 KiB |  00m00s
[ 77/166] liborc2-0:2.0.3-3.fc42.x86_64 100% |  12.2 MiB/s | 512.0 KiB |  00m00s
[ 78/166] snappy-0:1.2.1-4.fc42.x86_64  100% |   2.3 MiB/s |  39.9 KiB |  00m00s
[ 79/166] re2-1:20240702-28.fc42.x86_64 100% |   9.1 MiB/s | 222.9 KiB |  00m00s
[ 80/166] uriparser-0:0.9.8-3.fc42.x86_ 100% |   5.7 MiB/s |  58.5 KiB |  00m00s
[ 81/166] utf8proc-0:2.9.0-2.fc42.x86_6 100% |   4.4 MiB/s |  81.2 KiB |  00m00s
[ 82/166] libarrow-acero-libs-0:18.0.0- 100% |  18.5 MiB/s | 511.2 KiB |  00m00s
[ 83/166] jbigkit-libs-0:2.1-31.fc42.x8 100% |   5.2 MiB/s |  53.3 KiB |  00m00s
[ 84/166] librttopo-0:1.1.0-16.fc42.x86 100% |   8.5 MiB/s | 208.7 KiB |  00m00s
[ 85/166] mariadb-connector-c-config-0: 100% | 883.0 KiB/s |   8.8 KiB |  00m00s
[ 86/166] blosc-0:1.21.6-6.fc42.x86_64  100% |   5.7 MiB/s |  58.4 KiB |  00m00s
[ 87/166] libzip-0:1.11.3-1.fc42.x86_64 100% |   3.8 MiB/s |  70.3 KiB |  00m00s
[ 88/166] fontconfig-0:2.15.0-9.fc42.x8 100% |   7.1 MiB/s | 270.7 KiB |  00m00s
[ 89/166] thrift-0:0.20.0-3.fc41.x86_64 100% |  31.3 MiB/s |   1.7 MiB |  00m00s
[ 90/166] gpgmepp-0:1.24.1-1.fc42.x86_6 100% |   3.3 MiB/s | 143.4 KiB |  00m00s
[ 91/166] lcms2-0:2.16-5.fc42.x86_64    100% |   6.9 MiB/s | 184.1 KiB |  00m00s
[ 92/166] nspr-0:4.36.0-3.fc42.x86_64   100% |   6.7 MiB/s | 137.7 KiB |  00m00s
[ 93/166] nss-0:3.107.0-2.fc42.x86_64   100% |  22.6 MiB/s | 719.0 KiB |  00m00s
[ 94/166] poppler-data-0:0.4.11-9.fc42. 100% |  24.1 MiB/s |   2.0 MiB |  00m00s
[ 95/166] flexiblas-0:3.4.4-7.fc42.x86_ 100% | 472.5 KiB/s |  25.5 KiB |  00m00s
[ 96/166] proj-data-0:9.5.1-2.fc42.noar 100% |  14.0 MiB/s |   1.3 MiB |  00m00s
[ 97/166] flexiblas-openblas-openmp-0:3 100% | 910.2 KiB/s |  17.3 KiB |  00m00s
[ 98/166] libquadmath-0:15.0.1-0.3.fc42 100% |   6.5 MiB/s | 180.5 KiB |  00m00s
[ 99/166] graphite2-0:1.3.14-16.fc41.x8 100% |   5.5 MiB/s |  95.1 KiB |  00m00s
[100/166] glib2-0:2.83.2-3.fc42.x86_64  100% |  42.7 MiB/s |   3.1 MiB |  00m00s
[101/166] flexiblas-netlib64-0:3.4.4-7. 100% |  24.5 MiB/s |   3.1 MiB |  00m00s
[102/166] protobuf-0:3.19.6-10.fc41.x86 100% |   6.3 MiB/s |   1.0 MiB |  00m00s
[103/166] abseil-cpp-0:20240722.0-4.fc4 100% |   5.4 MiB/s | 610.9 KiB |  00m00s
[104/166] default-fonts-core-sans-0:4.2 100% |   3.4 MiB/s |  31.3 KiB |  00m00s
[105/166] xml-common-0:0.6.3-66.fc42.no 100% |   1.2 MiB/s |  31.2 KiB |  00m00s
[106/166] gpgme-0:1.24.1-1.fc42.x86_64  100% |   1.1 MiB/s | 219.5 KiB |  00m00s
[107/166] libicu-0:76.1-3.fc42.x86_64   100% |  38.4 MiB/s |  10.7 MiB |  00m00s
[108/166] libassuan-0:2.5.7-3.fc42.x86_ 100% | 331.3 KiB/s |  67.6 KiB |  00m00s
[109/166] nss-softokn-0:3.107.0-2.fc42. 100% |  12.3 MiB/s | 415.6 KiB |  00m00s
[110/166] nss-sysinit-0:3.107.0-2.fc42. 100% |   1.9 MiB/s |  19.2 KiB |  00m00s
[111/166] nss-util-0:3.107.0-2.fc42.x86 100% |   4.7 MiB/s |  86.6 KiB |  00m00s
[112/166] flexiblas-openblas-openmp64-0 100% | 234.3 KiB/s |  17.3 KiB |  00m00s
[113/166] openblas-openmp-0:0.3.28-3.fc 100% |  41.6 MiB/s |   5.0 MiB |  00m00s
[114/166] gnutls-0:3.8.8-2.fc42.x86_64  100% |   9.5 MiB/s |   1.1 MiB |  00m00s
[115/166] abattis-cantarell-vf-fonts-0: 100% |   2.6 MiB/s | 120.3 KiB |  00m00s
[116/166] google-noto-sans-vf-fonts-0:2 100% |  20.7 MiB/s | 614.7 KiB |  00m00s
[117/166] gnupg2-0:2.4.7-1.fc42.x86_64  100% |  25.2 MiB/s |   2.8 MiB |  00m00s
[118/166] libgpg-error-0:1.51-2.fc42.x8 100% |   2.3 MiB/s | 237.2 KiB |  00m00s
[119/166] nss-softokn-freebl-0:3.107.0- 100% |   3.1 MiB/s | 329.1 KiB |  00m00s
[120/166] nettle-0:3.10-6.fc42.x86_64   100% |  11.2 MiB/s | 424.3 KiB |  00m00s
[121/166] google-noto-fonts-common-0:20 100% | 556.0 KiB/s |  17.2 KiB |  00m00s
[122/166] openblas-openmp64-0:0.3.28-3. 100% |  34.9 MiB/s |   4.9 MiB |  00m00s
[123/166] libgcrypt-0:1.11.0-5.fc42.x86 100% |   4.9 MiB/s | 593.3 KiB |  00m00s
[124/166] libksba-0:1.6.7-3.fc42.x86_64 100% |   1.5 MiB/s | 162.0 KiB |  00m00s
[125/166] npth-0:1.8-2.fc42.x86_64      100% |   1.7 MiB/s |  25.8 KiB |  00m00s
[126/166] tpm2-tss-0:4.1.3-6.fc42.x86_6 100% |  18.9 MiB/s | 425.4 KiB |  00m00s
[127/166] libusb1-0:1.0.27-8.fc42.x86_6 100% |   3.6 MiB/s |  77.4 KiB |  00m00s
[128/166] pre-commit-0:4.1.0-1.fc42.noa 100% |  14.2 MiB/s | 378.0 KiB |  00m00s
[129/166] python3-cfgv-0:3.4.0-9.fc42.n 100% |   2.1 MiB/s |  23.3 KiB |  00m00s
[130/166] python3-nodeenv-0:1.9.1-4.fc4 100% |   4.7 MiB/s |  53.4 KiB |  00m00s
[131/166] libyaml-0:0.2.5-16.fc42.x86_6 100% |   5.9 MiB/s |  60.7 KiB |  00m00s
[132/166] python3-pyyaml-0:6.0.2-2.fc42 100% |  10.7 MiB/s | 230.4 KiB |  00m00s
[133/166] python3-virtualenv-0:20.29.1- 100% |  13.5 MiB/s | 291.4 KiB |  00m00s
[134/166] python-setuptools-wheel-0:74. 100% |  16.4 MiB/s |   1.1 MiB |  00m00s
[135/166] python3-filelock-0:3.15.4-5.f 100% | 763.5 KiB/s |  43.5 KiB |  00m00s
[136/166] python-wheel-wheel-1:0.45.1-3 100% |   1.2 MiB/s |  77.2 KiB |  00m00s
[137/166] python3-iniconfig-0:1.1.1-25. 100% |   1.3 MiB/s |  18.1 KiB |  00m00s
[138/166] python3-pluggy-0:1.5.0-2.fc42 100% |   3.6 MiB/s |  58.9 KiB |  00m00s
[139/166] python3-distlib-0:0.3.9-2.fc4 100% |   4.7 MiB/s | 266.8 KiB |  00m00s
[140/166] python3-jinja2-0:3.1.5-2.fc42 100% |   7.7 MiB/s | 496.5 KiB |  00m00s
[141/166] python3-markupsafe-0:3.0.2-2. 100% |   2.4 MiB/s |  30.1 KiB |  00m00s
[142/166] python3-pytest-0:8.3.4-2.fc42 100% |  15.3 MiB/s |   2.2 MiB |  00m00s
[143/166] python3-urllib3-0:2.3.0-2.fc4 100% |   4.5 MiB/s | 283.3 KiB |  00m00s
[144/166] python3-pytz-0:2024.2-2.fc42. 100% |   1.1 MiB/s |  64.4 KiB |  00m00s
[145/166] python3-cairo-0:1.25.1-6.fc42 100% |   6.4 MiB/s | 124.0 KiB |  00m00s
[146/166] cairo-0:1.18.2-3.fc42.x86_64  100% |  18.3 MiB/s | 731.8 KiB |  00m00s
[147/166] libX11-0:1.8.10-3.fc42.x86_64 100% |  14.5 MiB/s | 654.5 KiB |  00m00s
[148/166] libXext-0:1.3.6-3.fc42.x86_64 100% |   1.5 MiB/s |  39.3 KiB |  00m00s
[149/166] libXrender-0:0.9.12-2.fc42.x8 100% |   2.9 MiB/s |  26.9 KiB |  00m00s
[150/166] libxcb-0:1.17.0-5.fc42.x86_64 100% |  12.3 MiB/s | 239.0 KiB |  00m00s
[151/166] pixman-0:0.44.2-2.fc42.x86_64 100% |  11.3 MiB/s | 277.4 KiB |  00m00s
[152/166] libX11-common-0:1.8.10-3.fc42 100% |   8.2 MiB/s | 175.9 KiB |  00m00s
[153/166] libXau-0:1.0.12-2.fc42.x86_64 100% |   2.7 MiB/s |  33.6 KiB |  00m00s
[154/166] libraqm-0:0.10.1-2.fc42.x86_6 100% |   2.4 MiB/s |  22.5 KiB |  00m00s
[155/166] python3-pillow-0:11.1.0-2.fc4 100% |  26.5 MiB/s |   1.0 MiB |  00m00s
[156/166] libimagequant-0:4.0.3-6.fc42. 100% |   7.3 MiB/s | 312.9 KiB |  00m00s
[157/166] fribidi-0:1.0.16-2.fc42.x86_6 100% |   4.0 MiB/s |  53.6 KiB |  00m00s
[158/166] python3-olefile-0:0.47-6.fc42 100% |   2.0 MiB/s |  74.6 KiB |  00m00s
[159/166] python3-six-0:1.17.0-2.fc42.n 100% |   4.5 MiB/s |  41.3 KiB |  00m00s
[160/166] python3-pycodestyle-0:2.12.1- 100% |   5.7 MiB/s | 105.6 KiB |  00m00s
[161/166] python3-pyparsing-0:3.2.1-1.f 100% |   6.3 MiB/s | 226.5 KiB |  00m00s
[162/166] boost-program-options-0:1.83. 100% |   5.7 MiB/s | 111.2 KiB |  00m00s
[163/166] openblas-0:0.3.28-3.fc42.x86_ 100% |   3.6 MiB/s |  41.1 KiB |  00m00s
[164/166] python3-identify-0:2.6.6-1.fc 100% |   3.1 MiB/s |  91.5 KiB |  00m00s
[165/166] hdf-libs-0:4.3.0-3.fc42.x86_6 100% |  10.6 MiB/s | 294.1 KiB |  00m00s
[166/166] python3-click-0:8.1.8-1.fc42. 100% |   5.5 MiB/s | 220.8 KiB |  00m00s
--------------------------------------------------------------------------------
[166/166] Total                         100% |  28.3 MiB/s | 139.1 MiB |  00m05s
Running transaction
[  1/168] Verify package files          100% | 347.0   B/s | 166.0   B |  00m00s
[  2/168] Prepare transaction           100% | 954.0   B/s | 166.0   B |  00m00s
[  3/168] Installing nspr-0:4.36.0-3.fc 100% | 103.2 MiB/s | 317.1 KiB |  00m00s
[  4/168] Installing libgfortran-0:15.0 100% | 301.8 MiB/s |   3.3 MiB |  00m00s
[  5/168] Installing libgpg-error-0:1.5 100% |  41.9 MiB/s | 900.0 KiB |  00m00s
[  6/168] Installing libjpeg-turbo-0:3. 100% | 262.0 MiB/s | 804.9 KiB |  00m00s
[  7/168] Installing nss-util-0:3.107.0 100% | 100.5 MiB/s | 205.8 KiB |  00m00s
[  8/168] Installing libarrow-doc-0:18. 100% | 113.8 MiB/s | 116.6 KiB |  00m00s
[  9/168] Installing fonts-filesystem-1 100% |   0.0   B/s | 788.0   B |  00m00s
[ 10/168] Installing libpng-2:1.6.44-2. 100% | 118.6 MiB/s | 242.9 KiB |  00m00s
[ 11/168] Installing libaec-0:1.1.3-2.f 100% |  98.0 MiB/s | 100.3 KiB |  00m00s
[ 12/168] Installing libassuan-0:2.5.7- 100% |  82.8 MiB/s | 169.6 KiB |  00m00s
[ 13/168] Installing snappy-0:1.2.1-4.f 100% |  71.2 MiB/s |  72.9 KiB |  00m00s
[ 14/168] Installing openjpeg-0:2.5.3-6 100% | 147.7 MiB/s | 453.8 KiB |  00m00s
[ 15/168] Installing libwebp-0:1.5.0-2. 100% | 185.9 MiB/s | 951.8 KiB |  00m00s
[ 16/168] Installing geos-0:3.13.0-1.fc 100% | 128.4 MiB/s |   3.9 MiB |  00m00s
[ 17/168] Installing hdf5-0:1.14.5-2.fc 100% | 158.4 MiB/s |   7.1 MiB |  00m00s
[ 18/168] Installing hdf-libs-0:4.3.0-3 100% | 168.0 MiB/s | 688.3 KiB |  00m00s
[ 19/168] Installing python3-matplotlib 100% | 282.6 MiB/s |   7.9 MiB |  00m00s
[ 20/168] Installing python3-matplotlib 100% |  92.8 MiB/s | 760.1 KiB |  00m00s
[ 21/168] Installing openblas-0:0.3.28- 100% | 105.8 MiB/s | 108.3 KiB |  00m00s
[ 22/168] Installing libquadmath-0:15.0 100% | 157.8 MiB/s | 323.2 KiB |  00m00s
[ 23/168] Installing lcms2-0:2.16-5.fc4 100% | 143.0 MiB/s | 439.3 KiB |  00m00s
[ 24/168] Installing minizip-ng-compat- 100% | 155.6 MiB/s | 159.3 KiB |  00m00s
[ 25/168] Installing freexl-0:2.0.0-13. 100% |  92.2 MiB/s |  94.5 KiB |  00m00s
[ 26/168] Installing liblerc-0:4.0.0-8. 100% | 207.6 MiB/s | 637.6 KiB |  00m00s
[ 27/168] Installing libdeflate-0:1.23- 100% | 121.2 MiB/s | 124.1 KiB |  00m00s
[ 28/168] Installing imath-0:3.1.12-2.f 100% | 125.6 MiB/s | 385.9 KiB |  00m00s
[ 29/168] Installing python3-idna-0:3.1 100% | 154.9 MiB/s | 634.3 KiB |  00m00s
[ 30/168] Installing libqhull_r-1:8.0.2 100% | 236.4 MiB/s | 484.1 KiB |  00m00s
[ 31/168] Installing python3-platformdi 100% |  54.8 MiB/s | 168.4 KiB |  00m00s
[ 32/168] Installing python3-urllib3-0: 100% | 113.1 MiB/s |   1.0 MiB |  00m00s
[ 33/168] Installing openexr-libs-0:3.2 100% | 326.5 MiB/s |   6.5 MiB |  00m00s
[ 34/168] Installing openblas-openmp-0: 100% | 443.9 MiB/s |  39.1 MiB |  00m00s
[ 35/168] Installing flexiblas-0:3.4.4- 100% |  48.5 MiB/s |  49.7 KiB |  00m00s
[ 36/168] Installing flexiblas-openblas 100% |  43.0 MiB/s |  44.1 KiB |  00m00s
[ 37/168] Installing flexiblas-netlib-0 100% | 217.1 MiB/s |  10.6 MiB |  00m00s
[ 38/168] Installing python3-numpy-f2py 100% |  50.4 MiB/s |   2.1 MiB |  00m00s
[ 39/168] Installing python3-numpy-1:2. 100% | 203.4 MiB/s |  41.1 MiB |  00m00s
[ 40/168] Installing python3-contourpy- 100% | 115.8 MiB/s | 829.7 KiB |  00m00s
[ 41/168] Installing openblas-openmp64- 100% | 404.2 MiB/s |  39.2 MiB |  00m00s
[ 42/168] Installing flexiblas-netlib64 100% | 202.7 MiB/s |  10.7 MiB |  00m00s
[ 43/168] Installing flexiblas-openblas 100% |  21.5 MiB/s |  44.1 KiB |  00m00s
[ 44/168] Installing arpack-0:3.9.1-6.f 100% | 126.6 MiB/s | 648.1 KiB |  00m00s
[ 45/168] Installing armadillo-0:12.8.1 100% |  40.9 MiB/s |  83.8 KiB |  00m00s
[ 46/168] Installing librttopo-0:1.1.0- 100% | 123.7 MiB/s | 506.5 KiB |  00m00s
[ 47/168] Installing blosc-0:1.21.6-6.f 100% |  42.0 MiB/s | 129.0 KiB |  00m00s
[ 48/168] Installing dejavu-sans-fonts- 100% | 229.5 MiB/s |   5.5 MiB |  00m00s
[ 49/168] Installing abattis-cantarell- 100% |  94.9 MiB/s | 194.4 KiB |  00m00s
[ 50/168] Installing nss-softokn-freebl 100% | 166.1 MiB/s | 850.5 KiB |  00m00s
[ 51/168] Installing nss-softokn-0:3.10 100% | 269.9 MiB/s |   1.9 MiB |  00m00s
[ 52/168] Installing nss-sysinit-0:3.10 100% |   1.0 MiB/s |  19.2 KiB |  00m00s
[ 53/168] Installing nss-0:3.107.0-2.fc 100% |  55.5 MiB/s |   1.9 MiB |  00m00s
[ 54/168] Installing libgcrypt-0:1.11.0 100% | 196.2 MiB/s |   1.6 MiB |  00m00s
[ 55/168] Installing libksba-0:1.6.7-3. 100% | 131.9 MiB/s | 405.1 KiB |  00m00s
[ 56/168] Installing python3-click-0:8. 100% | 174.1 MiB/s |   1.0 MiB |  00m00s
[ 57/168] Installing boost-program-opti 100% | 137.6 MiB/s | 281.8 KiB |  00m00s
[ 58/168] Installing python3-identify-0 100% |  34.0 MiB/s | 730.1 KiB |  00m00s
[ 59/168] Installing python3-six-0:1.17 100% |  58.1 MiB/s | 119.0 KiB |  00m00s
[ 60/168] Installing python3-dateutil-1 100% | 124.1 MiB/s | 889.9 KiB |  00m00s
[ 61/168] Installing python3-pycodestyl 100% |  17.9 MiB/s | 367.5 KiB |  00m00s
[ 62/168] Installing python3-pyparsing- 100% | 167.9 MiB/s | 859.6 KiB |  00m00s
[ 63/168] Installing fribidi-0:1.0.16-2 100% |   9.2 MiB/s | 196.8 KiB |  00m00s
[ 64/168] Installing python3-olefile-0: 100% | 111.6 MiB/s | 342.7 KiB |  00m00s
[ 65/168] Installing libimagequant-0:4. 100% | 136.3 MiB/s | 697.9 KiB |  00m00s
[ 66/168] Installing libXau-0:1.0.12-2. 100% |  38.3 MiB/s |  78.5 KiB |  00m00s
[ 67/168] Installing libxcb-0:1.17.0-5. 100% |  98.2 MiB/s |   1.1 MiB |  00m00s
[ 68/168] Installing libX11-common-0:1. 100% |  56.5 MiB/s |   1.2 MiB |  00m00s
[ 69/168] Installing libX11-0:1.8.10-3. 100% | 184.2 MiB/s |   1.3 MiB |  00m00s
[ 70/168] Installing libXext-0:1.3.6-3. 100% |  44.5 MiB/s |  91.2 KiB |  00m00s
[ 71/168] Installing libXrender-0:0.9.1 100% |  25.0 MiB/s |  51.3 KiB |  00m00s
[ 72/168] Installing pixman-0:0.44.2-2. 100% | 131.9 MiB/s | 675.3 KiB |  00m00s
[ 73/168] Installing python3-pytz-0:202 100% |  31.7 MiB/s | 227.4 KiB |  00m00s
[ 74/168] Installing python3-pandas-0:2 100% | 219.9 MiB/s |  42.4 MiB |  00m00s
[ 75/168] Installing python3-markupsafe 100% |  19.5 MiB/s |  59.9 KiB |  00m00s
[ 76/168] Installing python3-jinja2-0:3 100% | 194.2 MiB/s |   2.9 MiB |  00m00s
[ 77/168] Installing python3-distlib-0: 100% | 195.4 MiB/s |   1.2 MiB |  00m00s
[ 78/168] Installing python3-pluggy-0:1 100% |  64.8 MiB/s | 199.0 KiB |  00m00s
[ 79/168] Installing python3-iniconfig- 100% |  11.5 MiB/s |  23.5 KiB |  00m00s
[ 80/168] Installing python3-filelock-0 100% |  31.4 MiB/s |  96.4 KiB |  00m00s
[ 81/168] Installing python-wheel-wheel 100% |  70.7 MiB/s |  72.4 KiB |  00m00s
[ 82/168] Installing python-setuptools- 100% | 230.6 MiB/s |   1.2 MiB |  00m00s
[ 83/168] Installing python3-virtualenv 100% |  15.3 MiB/s | 720.8 KiB |  00m00s
[ 84/168] Installing libyaml-0:0.2.5-16 100% |  66.4 MiB/s | 136.0 KiB |  00m00s
[ 85/168] Installing python3-pyyaml-0:6 100% |  86.2 MiB/s | 794.8 KiB |  00m00s
[ 86/168] Installing python3-nodeenv-0: 100% |  10.6 MiB/s | 217.8 KiB |  00m00s
[ 87/168] Installing python3-cfgv-0:3.4 100% |  24.9 MiB/s |  51.0 KiB |  00m00s
[ 88/168] Installing libusb1-0:1.0.27-8 100% |   3.2 MiB/s | 168.2 KiB |  00m00s
[ 89/168] Installing tpm2-tss-0:4.1.3-6 100% | 142.5 MiB/s |   1.6 MiB |  00m00s
[ 90/168] Installing npth-0:1.8-2.fc42. 100% |  49.5 MiB/s |  50.7 KiB |  00m00s
[ 91/168] Installing google-noto-fonts- 100% |  18.1 MiB/s |  18.5 KiB |  00m00s
[ 92/168] Installing google-noto-sans-v 100% | 231.9 MiB/s |   1.4 MiB |  00m00s
[ 93/168] Installing default-fonts-core 100% |   8.9 MiB/s |  18.2 KiB |  00m00s
[ 94/168] Installing nettle-0:3.10-6.fc 100% | 193.6 MiB/s | 792.8 KiB |  00m00s
[ 95/168] Installing gnutls-0:3.8.8-2.f 100% | 218.2 MiB/s |   3.3 MiB |  00m00s
[ 96/168] Installing glib2-0:2.83.2-3.f 100% | 188.3 MiB/s |  14.7 MiB |  00m00s
[ 97/168] Installing gnupg2-0:2.4.7-1.f 100% | 160.7 MiB/s |   9.8 MiB |  00m00s
[ 98/168] Installing gpgme-0:1.24.1-1.f 100% |  27.6 MiB/s | 593.2 KiB |  00m00s
[ 99/168] Installing gpgmepp-0:1.24.1-1 100% |  21.0 MiB/s | 430.2 KiB |  00m00s
[100/168] Installing xml-common-0:0.6.3 100% |  26.4 MiB/s |  81.1 KiB |  00m00s
[101/168] Installing libicu-0:76.1-3.fc 100% | 290.8 MiB/s |  36.3 MiB |  00m00s
[102/168] Installing abseil-cpp-0:20240 100% | 120.7 MiB/s |   2.5 MiB |  00m00s
[103/168] Installing re2-1:20240702-28. 100% | 184.7 MiB/s | 567.4 KiB |  00m00s
[104/168] Installing protobuf-0:3.19.6- 100% | 271.5 MiB/s |   3.3 MiB |  00m00s
[105/168] Installing liborc2-0:2.0.3-3. 100% | 238.8 MiB/s |   1.7 MiB |  00m00s
[106/168] Installing graphite2-0:1.3.14 100% |  11.2 MiB/s | 194.1 KiB |  00m00s
[107/168] Installing harfbuzz-0:10.2.0- 100% | 226.8 MiB/s |   2.7 MiB |  00m00s
[108/168] Installing freetype-0:2.13.3- 100% | 168.0 MiB/s | 859.9 KiB |  00m00s
[109/168] Installing fontconfig-0:2.15. 100% | 750.6 KiB/s | 813.7 KiB |  00m01s
[110/168] Installing cairo-0:1.18.2-3.f 100% | 198.1 MiB/s |   1.8 MiB |  00m00s
[111/168] Installing python3-cairo-0:1. 100% | 121.2 MiB/s | 496.6 KiB |  00m00s
[112/168] Installing libraqm-0:0.10.1-2 100% |  29.0 MiB/s |  29.7 KiB |  00m00s
[113/168] Installing proj-data-0:9.5.1- 100% | 326.2 MiB/s |   9.1 MiB |  00m00s
[114/168] Installing poppler-data-0:0.4 100% | 229.4 MiB/s |  12.4 MiB |  00m00s
[115/168] Installing thrift-0:0.20.0-3. 100% | 146.0 MiB/s |   4.8 MiB |  00m00s
[116/168] Installing libzip-0:1.11.3-1. 100% |  66.9 MiB/s | 137.0 KiB |  00m00s
[117/168] Installing netcdf-0:4.9.2-8.f 100% |  78.4 MiB/s |   2.4 MiB |  00m00s
[118/168] Installing mariadb-connector- 100% | 988.3 KiB/s |   1.0 KiB |  00m00s
[119/168] Installing mariadb-connector- 100% | 105.1 MiB/s | 538.3 KiB |  00m00s
[120/168] Installing jbigkit-libs-0:2.1 100% |  60.3 MiB/s | 123.4 KiB |  00m00s
[121/168] Installing libtiff-0:4.7.0-3. 100% | 151.7 MiB/s | 621.3 KiB |  00m00s
[122/168] Installing proj-0:9.5.1-2.fc4 100% | 141.3 MiB/s |   4.5 MiB |  00m00s
[123/168] Installing libgeotiff-0:1.7.3 100% |  17.5 MiB/s | 322.8 KiB |  00m00s
[124/168] Installing libspatialite-0:5. 100% | 355.9 MiB/s |  15.3 MiB |  00m00s
[125/168] Installing poppler-0:24.08.0- 100% | 259.2 MiB/s |   3.6 MiB |  00m00s
[126/168] Installing python3-pillow-0:1 100% | 166.0 MiB/s |   4.0 MiB |  00m00s
[127/168] Installing uriparser-0:0.9.8- 100% |   8.0 MiB/s | 139.8 KiB |  00m00s
[128/168] Installing libkml-0:1.3.0-51. 100% | 173.3 MiB/s |   1.2 MiB |  00m00s
[129/168] Installing utf8proc-0:2.9.0-2 100% | 179.7 MiB/s | 368.0 KiB |  00m00s
[130/168] Installing libarrow-0:18.0.0- 100% | 347.7 MiB/s |  24.3 MiB |  00m00s
[131/168] Installing parquet-libs-0:18. 100% | 296.8 MiB/s |   3.3 MiB |  00m00s
[132/168] Installing libarrow-acero-lib 100% | 274.8 MiB/s |   1.4 MiB |  00m00s
[133/168] Installing libarrow-dataset-l 100% | 245.1 MiB/s |   1.5 MiB |  00m00s
[134/168] Installing python3-tabulate-0 100% |  19.8 MiB/s | 344.6 KiB |  00m00s
[135/168] Installing xerces-c-0:3.3.0-7 100% | 290.3 MiB/s |   3.8 MiB |  00m00s
[136/168] Installing unixODBC-0:2.3.12- 100% |  42.3 MiB/s |   1.0 MiB |  00m00s
[137/168] Installing ogdi-0:4.1.1-2.fc4 100% |  37.5 MiB/s | 806.9 KiB |  00m00s
[138/168] Installing libpq-0:16.4-1.fc4 100% | 135.3 MiB/s | 969.6 KiB |  00m00s
[139/168] Installing libgta-0:1.2.1-15. 100% |  69.8 MiB/s |  71.5 KiB |  00m00s
[140/168] Installing giflib-0:5.2.2-3.f 100% |  57.5 MiB/s | 117.8 KiB |  00m00s
[141/168] Installing cfitsio-0:4.5.0-5. 100% | 121.4 MiB/s |   1.8 MiB |  00m00s
[142/168] Installing gdal-libs-0:3.10.1 100% | 263.8 MiB/s |  30.1 MiB |  00m00s
[143/168] Installing python3-sphinx-the 100% |  22.7 MiB/s |  46.4 KiB |  00m00s
[144/168] Installing python3-snowballst 100% | 191.3 MiB/s |   1.7 MiB |  00m00s
[145/168] Installing python3-imagesize- 100% |  12.5 MiB/s |  38.3 KiB |  00m00s
[146/168] Installing python3-docutils-0 100% |  81.8 MiB/s |   5.0 MiB |  00m00s
[147/168] Installing python3-babel-0:2. 100% | 157.4 MiB/s |  28.5 MiB |  00m00s
[148/168] Installing python3-husl-0:4.0 100% |  11.0 MiB/s |  22.5 KiB |  00m00s
[149/168] Installing python3-charset-no 100% |  12.9 MiB/s | 329.5 KiB |  00m00s
[150/168] Installing python3-requests-0 100% |  69.1 MiB/s | 495.2 KiB |  00m00s
[151/168] Installing python3-pyflakes-0 100% |  14.4 MiB/s | 354.3 KiB |  00m00s
[152/168] Installing python3-mccabe-0:0 100% |  19.8 MiB/s |  40.7 KiB |  00m00s
[153/168] Installing python3-kiwisolver 100% |  25.0 MiB/s | 153.6 KiB |  00m00s
[154/168] Installing python3-fonttools- 100% | 188.6 MiB/s |  18.3 MiB |  00m00s
[155/168] Installing python3-cycler-0:0 100% |   7.7 MiB/s |  39.5 KiB |  00m00s
[156/168] Installing python3-matplotlib 100% | 195.4 MiB/s |  22.5 MiB |  00m00s
[157/168] Installing python3-pathspec-0 100% |  49.2 MiB/s | 201.5 KiB |  00m00s
[158/168] Installing python3-mypy_exten 100% |   4.7 MiB/s |  19.4 KiB |  00m00s
[159/168] Installing python3-pygments-0 100% |  78.5 MiB/s |   8.2 MiB |  00m00s
[160/168] Installing python3-sphinx-1:8 100% |  75.0 MiB/s |  11.3 MiB |  00m00s
[161/168] Installing python3-numpydoc-0 100% |  31.1 MiB/s | 668.0 KiB |  00m00s
[162/168] Installing python3-seaborn-0: 100% | 143.1 MiB/s |   2.3 MiB |  00m00s
[163/168] Installing black-0:24.4.2-3.f 100% |  65.0 MiB/s |   1.9 MiB |  00m00s
[164/168] Installing python3-flake8-0:6 100% |  17.3 MiB/s | 459.8 KiB |  00m00s
[165/168] Installing python3-gdal-0:3.1 100% | 209.8 MiB/s |   6.7 MiB |  00m00s
[166/168] Installing pre-commit-0:4.1.0 100% |  26.9 MiB/s | 825.5 KiB |  00m00s
[167/168] Installing python3-pytest-0:8 100% | 204.0 MiB/s |  21.0 MiB |  00m00s
[168/168] Installing python3-xmltodict- 100% | 166.2 KiB/s |  57.4 KiB |  00m00s
Warning: skipped OpenPGP checks for 4 packages from repository: copr_base
Complete!
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1737676800
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.FCOee6
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ cd geoserver_rest-2.9.1
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ '[' -f setup.py ']'
+ echo 'python3dist(setuptools) >= 40.8'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ RPM_TOXENV=py313
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir --output /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires -x all,dev,style
Handling setuptools >= 40.8 from default build backend
Requirement satisfied: setuptools >= 40.8
   (installed: setuptools 74.1.3)
running egg_info
writing geoserver_rest.egg-info/PKG-INFO
writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
writing requirements to geoserver_rest.egg-info/requires.txt
writing top-level names to geoserver_rest.egg-info/top_level.txt
file geoserver-rest-python.py (for module geoserver-rest-python) not found
reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
running dist_info
writing geoserver_rest.egg-info/PKG-INFO
writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
writing requirements to geoserver_rest.egg-info/requires.txt
writing top-level names to geoserver_rest.egg-info/top_level.txt
file geoserver-rest-python.py (for module geoserver-rest-python) not found
reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
creating '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/geoserver_rest-2.9.1.dist-info'
Handling pygments from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: pygments
   (installed: pygments 2.19.1)
Handling requests from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: requests
   (installed: requests 2.32.3)
Handling xmltodict from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: xmltodict
   (installed: xmltodict 0.13.0)
Handling matplotlib ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: matplotlib ; extra == 'all'
   (installed: matplotlib 3.10.0)
Handling seaborn ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: seaborn ; extra == 'all'
   (installed: seaborn 0.13.2)
Handling gdal ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: gdal ; extra == 'all'
   (installed: gdal 3.10.1)
Handling pytest ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: pytest ; extra == 'dev'
   (installed: pytest 8.3.4)
Handling black ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: black ; extra == 'dev'
   (installed: black 24.4.2)
Handling flake8 ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: flake8 ; extra == 'dev'
   (installed: flake8 6.1.0)
Handling sphinx >=1.7 ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: sphinx >=1.7 ; extra == 'dev'
   (installed: sphinx 8.1.3)
Handling pre-commit ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: pre-commit ; extra == 'dev'
   (installed: pre-commit 4.1.0)
Handling matplotlib ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: matplotlib ; extra == 'style'
   (installed: matplotlib 3.10.0)
Handling seaborn ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: seaborn ; extra == 'style'
   (installed: seaborn 0.13.2)
Handling gdal ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: gdal ; extra == 'style'
   (installed: gdal 3.10.1)
+ cat /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires
+ rm -rfv geoserver_rest-2.9.1.dist-info/
removed 'geoserver_rest-2.9.1.dist-info/top_level.txt'
removed 'geoserver_rest-2.9.1.dist-info/METADATA'
removed 'geoserver_rest-2.9.1.dist-info/LICENSE'
removed directory 'geoserver_rest-2.9.1.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Wrote: /builddir/build/SRPMS/python-geoserver-rest-2.9.1-1.fc42.buildreqs.nosrc.rpm
INFO: Going to install missing dynamic buildrequires
Updating and loading repositories:
 fedora                                 100% | 280.0 KiB/s |   6.4 KiB |  00m00s
 Copr repository                        100% |  35.8 KiB/s |   1.5 KiB |  00m00s
 Copr repository                        100% |  49.8 MiB/s |  43.4 MiB |  00m01s
Repositories loaded.
Package "pyproject-rpm-macros-1.16.4-2.fc42.noarch" is already installed.
Package "python3-devel-3.13.1-3.fc42.x86_64" is already installed.
Package "black-24.4.2-3.fc42.noarch" is already installed.
Package "python3-flake8-6.1.0-5.fc42.noarch" is already installed.
Package "python3-gdal-3.10.1-2.fc42.x86_64" is already installed.
Package "python3-matplotlib-3.10.0-1.fc42.x86_64" is already installed.
Package "python3-packaging-24.2-3.fc42.noarch" is already installed.
Package "python3-pip-24.3.1-2.fc42.noarch" is already installed.
Package "pre-commit-4.1.0-1.fc42.noarch" is already installed.
Package "python3-pygments-2.19.1-1.fc42.noarch" is already installed.
Package "python3-pytest-8.3.4-2.fc42.noarch" is already installed.
Package "python3-requests-2.32.3-4.fc42.noarch" is already installed.
Package "python3-seaborn-0.13.2-3.fc41.noarch" is already installed.
Package "python3-setuptools-74.1.3-5.fc42.noarch" is already installed.
Package "python3-sphinx-1:8.1.3-2.fc42.noarch" is already installed.
Package "python3-xmltodict-0.13.0-6.fc42.noarch" is already installed.

Nothing to do.
Building target platforms: x86_64
Building for target x86_64
setting SOURCE_DATE_EPOCH=1737676800
Executing(%generate_buildrequires): /bin/sh -e /var/tmp/rpm-tmp.Dfp2iE
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ cd geoserver_rest-2.9.1
+ echo pyproject-rpm-macros
+ echo python3-devel
+ echo 'python3dist(packaging)'
+ echo 'python3dist(pip) >= 19'
+ '[' -f pyproject.toml ']'
+ '[' -f setup.py ']'
+ echo 'python3dist(setuptools) >= 40.8'
+ rm -rfv '*.dist-info/'
+ '[' -f /usr/bin/python3 ']'
+ mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ echo -n
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1  '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ RPM_TOXENV=py313
+ HOSTNAME=rpmbuild
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_buildrequires.py --generate-extras --python3_pkgversion 3 --wheeldir /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir --output /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires -x all,dev,style
Handling setuptools >= 40.8 from default build backend
Requirement satisfied: setuptools >= 40.8
   (installed: setuptools 74.1.3)
running egg_info
writing geoserver_rest.egg-info/PKG-INFO
writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
writing requirements to geoserver_rest.egg-info/requires.txt
writing top-level names to geoserver_rest.egg-info/top_level.txt
file geoserver-rest-python.py (for module geoserver-rest-python) not found
reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
running dist_info
writing geoserver_rest.egg-info/PKG-INFO
writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
writing requirements to geoserver_rest.egg-info/requires.txt
writing top-level names to geoserver_rest.egg-info/top_level.txt
file geoserver-rest-python.py (for module geoserver-rest-python) not found
reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
creating '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/geoserver_rest-2.9.1.dist-info'
Handling pygments from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: pygments
   (installed: pygments 2.19.1)
Handling requests from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: requests
   (installed: requests 2.32.3)
Handling xmltodict from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: xmltodict
   (installed: xmltodict 0.13.0)
Handling matplotlib ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: matplotlib ; extra == 'all'
   (installed: matplotlib 3.10.0)
Handling seaborn ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: seaborn ; extra == 'all'
   (installed: seaborn 0.13.2)
Handling gdal ; extra == 'all' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: gdal ; extra == 'all'
   (installed: gdal 3.10.1)
Handling pytest ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: pytest ; extra == 'dev'
   (installed: pytest 8.3.4)
Handling black ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: black ; extra == 'dev'
   (installed: black 24.4.2)
Handling flake8 ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: flake8 ; extra == 'dev'
   (installed: flake8 6.1.0)
Handling sphinx >=1.7 ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: sphinx >=1.7 ; extra == 'dev'
   (installed: sphinx 8.1.3)
Handling pre-commit ; extra == 'dev' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: pre-commit ; extra == 'dev'
   (installed: pre-commit 4.1.0)
Handling matplotlib ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: matplotlib ; extra == 'style'
   (installed: matplotlib 3.10.0)
Handling seaborn ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: seaborn ; extra == 'style'
   (installed: seaborn 0.13.2)
Handling gdal ; extra == 'style' from hook generated metadata: Requires-Dist (geoserver-rest)
Requirement satisfied: gdal ; extra == 'style'
   (installed: gdal 3.10.1)
+ cat /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-buildrequires
+ rm -rfv geoserver_rest-2.9.1.dist-info/
removed 'geoserver_rest-2.9.1.dist-info/top_level.txt'
removed 'geoserver_rest-2.9.1.dist-info/METADATA'
removed 'geoserver_rest-2.9.1.dist-info/LICENSE'
removed directory 'geoserver_rest-2.9.1.dist-info/'
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.93BdM3
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CFLAGS
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CXXFLAGS
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FFLAGS
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd geoserver_rest-2.9.1
+ mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ VALAFLAGS=-g
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ CC=gcc
+ CXX=g++
+ TMPDIR=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ /usr/bin/python3 -Bs /usr/lib/rpm/redhat/pyproject_wheel.py /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir
Processing /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1
  Preparing metadata (pyproject.toml): started
  Running command Preparing metadata (pyproject.toml)
  running dist_info
  creating /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info
  writing /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/PKG-INFO
  writing dependency_links to /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/dependency_links.txt
  writing requirements to /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/requires.txt
  writing top-level names to /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/top_level.txt
  writing manifest file '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/SOURCES.txt'
  file geoserver-rest-python.py (for module geoserver-rest-python) not found
  reading manifest file '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/SOURCES.txt'
  adding license file 'LICENSE'
  writing manifest file '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest.egg-info/SOURCES.txt'
  creating '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-modern-metadata-c64n9mv7/geoserver_rest-2.9.1.dist-info'
  Preparing metadata (pyproject.toml): finished with status 'done'
Building wheels for collected packages: geoserver-rest
  Building wheel for geoserver-rest (pyproject.toml): started
  Running command Building wheel for geoserver-rest (pyproject.toml)
  running bdist_wheel
  running build
  running build_py
  file geoserver-rest-python.py (for module geoserver-rest-python) not found
  creating build
  creating build/lib
  creating build/lib/geo
  copying geo/Calculation_gdal.py -> build/lib/geo
  copying geo/Geoserver.py -> build/lib/geo
  copying geo/Style.py -> build/lib/geo
  copying geo/__init__.py -> build/lib/geo
  copying geo/__version__.py -> build/lib/geo
  copying geo/supports.py -> build/lib/geo
  file geoserver-rest-python.py (for module geoserver-rest-python) not found
  installing to build/bdist.linux-x86_64/wheel
  running install
  running install_lib
  creating build/bdist.linux-x86_64
  creating build/bdist.linux-x86_64/wheel
  creating build/bdist.linux-x86_64/wheel/geo
  copying build/lib/geo/Calculation_gdal.py -> build/bdist.linux-x86_64/wheel/./geo
  copying build/lib/geo/Geoserver.py -> build/bdist.linux-x86_64/wheel/./geo
  copying build/lib/geo/Style.py -> build/bdist.linux-x86_64/wheel/./geo
  copying build/lib/geo/__init__.py -> build/bdist.linux-x86_64/wheel/./geo
  copying build/lib/geo/__version__.py -> build/bdist.linux-x86_64/wheel/./geo
  copying build/lib/geo/supports.py -> build/bdist.linux-x86_64/wheel/./geo
  running install_egg_info
  running egg_info
  writing geoserver_rest.egg-info/PKG-INFO
  writing dependency_links to geoserver_rest.egg-info/dependency_links.txt
  writing requirements to geoserver_rest.egg-info/requires.txt
  writing top-level names to geoserver_rest.egg-info/top_level.txt
  file geoserver-rest-python.py (for module geoserver-rest-python) not found
  reading manifest file 'geoserver_rest.egg-info/SOURCES.txt'
  adding license file 'LICENSE'
  writing manifest file 'geoserver_rest.egg-info/SOURCES.txt'
  Copying geoserver_rest.egg-info to build/bdist.linux-x86_64/wheel/./geoserver_rest-2.9.1-py3.13.egg-info
  running install_scripts
  creating build/bdist.linux-x86_64/wheel/geoserver_rest-2.9.1.dist-info/WHEEL
  creating '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir/pip-wheel-8bxn_gsa/.tmp-x6ddw5t_/geoserver_rest-2.9.1-py3-none-any.whl' and adding 'build/bdist.linux-x86_64/wheel' to it
  adding 'geo/Calculation_gdal.py'
  adding 'geo/Geoserver.py'
  adding 'geo/Style.py'
  adding 'geo/__init__.py'
  adding 'geo/__version__.py'
  adding 'geo/supports.py'
  adding 'geoserver_rest-2.9.1.dist-info/LICENSE'
  adding 'geoserver_rest-2.9.1.dist-info/METADATA'
  adding 'geoserver_rest-2.9.1.dist-info/WHEEL'
  adding 'geoserver_rest-2.9.1.dist-info/top_level.txt'
  adding 'geoserver_rest-2.9.1.dist-info/RECORD'
  removing build/bdist.linux-x86_64/wheel
  Building wheel for geoserver-rest (pyproject.toml): finished with status 'done'
  Created wheel for geoserver-rest: filename=geoserver_rest-2.9.1-py3-none-any.whl size=23974 sha256=e17569d23d11f0d6ef65e3dcd5672f459855e4d025a222746cf99aa2ae1a2f2e
  Stored in directory: /builddir/.cache/pip/wheels/d1/94/7e/24d152248263e3806984cdc956f655024d648df8ecfc9d6058
Successfully built geoserver-rest
+ RPM_EC=0
++ jobs -p
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.h8528j
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ '[' /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT '!=' / ']'
+ rm -rf /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT
++ dirname /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT
+ mkdir -p /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ mkdir /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CFLAGS
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CXXFLAGS
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FFLAGS
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd geoserver_rest-2.9.1
++ ls /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir/geoserver_rest-2.9.1-py3-none-any.whl
++ xargs basename --multiple
++ sed -E 's/([^-]+)-([^-]+)-.+\.whl/\1==\2/'
+ specifier=geoserver_rest==2.9.1
+ '[' -z geoserver_rest==2.9.1 ']'
+ TMPDIR=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/.pyproject-builddir
+ /usr/bin/python3 -m pip install --root /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT --prefix /usr --no-deps --disable-pip-version-check --progress-bar off --verbose --ignore-installed --no-warn-script-location --no-index --no-cache-dir --find-links /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir geoserver_rest==2.9.1
Using pip 24.3.1 from /usr/lib/python3.13/site-packages/pip (python 3.13)
Looking in links: /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/geoserver_rest-2.9.1/pyproject-wheeldir
Processing ./pyproject-wheeldir/geoserver_rest-2.9.1-py3-none-any.whl
Installing collected packages: geoserver_rest
Successfully installed geoserver_rest-2.9.1
+ '[' -d /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/bin ']'
+ rm -f /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-ghost-distinfo
+ site_dirs=()
+ '[' -d /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages ']'
+ site_dirs+=("/usr/lib/python3.13/site-packages")
+ '[' /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib64/python3.13/site-packages '!=' /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages ']'
+ '[' -d /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib64/python3.13/site-packages ']'
+ for site_dir in ${site_dirs[@]}
+ for distinfo in /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT$site_dir/*.dist-info
+ echo '%ghost /usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info'
+ sed -i s/pip/rpm/ /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info/INSTALLER
+ PYTHONPATH=/usr/lib/rpm/redhat
+ /usr/bin/python3 -B /usr/lib/rpm/redhat/pyproject_preprocess_record.py --buildroot /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT --record /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info/RECORD --output /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-record
+ rm -fv /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info/RECORD
removed '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info/RECORD'
+ rm -fv /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info/REQUESTED
removed '/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geoserver_rest-2.9.1.dist-info/REQUESTED'
++ wc -l /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-ghost-distinfo
++ cut -f1 '-d '
+ lines=1
+ '[' 1 -ne 1 ']'
+ RPM_FILES_ESCAPE=4.19
+ /usr/bin/python3 /usr/lib/rpm/redhat/pyproject_save_files.py --output-files /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-files --output-modules /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-modules --buildroot /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT --sitelib /usr/lib/python3.13/site-packages --sitearch /usr/lib64/python3.13/site-packages --python-version 3.13 --pyproject-record /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-record --prefix /usr '*' +auto
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/check-rpaths
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
+ /usr/lib/rpm/brp-remove-la-files
+ env /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j2
Bytecompiling .py files below /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13 using python3.13
/usr/lib/python3.13/site-packages/geo/Geoserver.py:2580: SyntaxWarning: invalid escape sequence '\w'
/usr/lib/python3.13/site-packages/geo/Geoserver.py:2580: SyntaxWarning: invalid escape sequence '\w'
+ /usr/lib/rpm/redhat/brp-python-hardlink
+ /usr/bin/add-determinism --brp -j2 /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/Calculation_gdal.cpython-313.pyc: rewriting with normalized contents
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/Style.cpython-313.pyc: rewriting with normalized contents
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/__init__.cpython-313.pyc: rewriting with normalized contents
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/__version__.cpython-313.pyc: rewriting with normalized contents
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/supports.cpython-313.pyc: rewriting with normalized contents
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/Geoserver.cpython-313.pyc: replacing with normalized version
/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages/geo/__pycache__/Geoserver.cpython-313.opt-1.pyc: replacing with normalized version
Scanned 8 directories and 23 files,
               processed 7 inodes,
               7 modified (2 replaced + 5 rewritten),
               0 unsupported format, 0 errors
Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.eUB2yI
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CFLAGS
+ CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer '
+ export CXXFLAGS
+ FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FFLAGS
+ FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules '
+ export FCFLAGS
+ VALAFLAGS=-g
+ export VALAFLAGS
+ RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn'
+ export RUSTFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,--as-needed  -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1  -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes '
+ export LDFLAGS
+ LT_SYS_LIBRARY_PATH=/usr/lib64:
+ export LT_SYS_LIBRARY_PATH
+ CC=gcc
+ export CC
+ CXX=g++
+ export CXX
+ cd geoserver_rest-2.9.1
++ cat /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-modules
+ '[' -z 'geo
geo.Calculation_gdal
geo.Geoserver
geo.Style
geo.supports' ']'
+ '[' '!' -f /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-modules ']'
+ PATH=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin
+ PYTHONPATH=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib64/python3.13/site-packages:/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages
+ _PYTHONSITE=/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib64/python3.13/site-packages:/builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT/usr/lib/python3.13/site-packages
+ PYTHONDONTWRITEBYTECODE=1
+ /usr/bin/python3 -sP /usr/lib/rpm/redhat/import_all_modules.py -f /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/python-geoserver-rest-2.9.1-1.fc42.x86_64-pyproject-modules -t
Check import: geo
+ RPM_EC=0
++ jobs -p
+ exit 0
Processing files: python3-geoserver-rest-2.9.1-1.fc42.noarch
Provides: python-geoserver-rest = 2.9.1-1.fc42 python3-geoserver-rest = 2.9.1-1.fc42 python3.13-geoserver-rest = 2.9.1-1.fc42 python3.13dist(geoserver-rest) = 2.9.1 python3dist(geoserver-rest) = 2.9.1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: python(abi) = 3.13 python3.13dist(pygments) python3.13dist(requests) python3.13dist(xmltodict)
Processing files: python3-geoserver-rest+all-2.9.1-1.fc42.noarch
Provides: python-geoserver-rest+all = 2.9.1-1.fc42 python3-geoserver-rest+all = 2.9.1-1.fc42 python3.13-geoserver-rest+all = 2.9.1-1.fc42 python3.13dist(geoserver-rest[all]) = 2.9.1 python3dist(geoserver-rest[all]) = 2.9.1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: python(abi) = 3.13 python3.13dist(gdal) python3.13dist(matplotlib) python3.13dist(seaborn)
Processing files: python3-geoserver-rest+dev-2.9.1-1.fc42.noarch
Provides: python-geoserver-rest+dev = 2.9.1-1.fc42 python3-geoserver-rest+dev = 2.9.1-1.fc42 python3.13-geoserver-rest+dev = 2.9.1-1.fc42 python3.13dist(geoserver-rest[dev]) = 2.9.1 python3dist(geoserver-rest[dev]) = 2.9.1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: python(abi) = 3.13 python3.13dist(black) python3.13dist(flake8) python3.13dist(pre-commit) python3.13dist(pytest) python3.13dist(sphinx) >= 1.7
Processing files: python3-geoserver-rest+style-2.9.1-1.fc42.noarch
Provides: python-geoserver-rest+style = 2.9.1-1.fc42 python3-geoserver-rest+style = 2.9.1-1.fc42 python3.13-geoserver-rest+style = 2.9.1-1.fc42 python3.13dist(geoserver-rest[style]) = 2.9.1 python3dist(geoserver-rest[style]) = 2.9.1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: python(abi) = 3.13 python3.13dist(gdal) python3.13dist(matplotlib) python3.13dist(seaborn)
Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILD/python-geoserver-rest-2.9.1-build/BUILDROOT
Wrote: /builddir/build/SRPMS/python-geoserver-rest-2.9.1-1.fc42.src.rpm
Wrote: /builddir/build/RPMS/python3-geoserver-rest+all-2.9.1-1.fc42.noarch.rpm
Wrote: /builddir/build/RPMS/python3-geoserver-rest+dev-2.9.1-1.fc42.noarch.rpm
Wrote: /builddir/build/RPMS/python3-geoserver-rest+style-2.9.1-1.fc42.noarch.rpm
Wrote: /builddir/build/RPMS/python3-geoserver-rest-2.9.1-1.fc42.noarch.rpm
Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.3VyuGj
+ umask 022
+ cd /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ test -d /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ rm -rf /builddir/build/BUILD/python-geoserver-rest-2.9.1-build
+ RPM_EC=0
++ jobs -p
+ exit 0
Finish: rpmbuild python-geoserver-rest-2.9.1-1.fc42.src.rpm
Finish: build phase for python-geoserver-rest-2.9.1-1.fc42.src.rpm
INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan
INFO: /var/lib/mock/fedora-rawhide-x86_64-1737681006.461301/root/var/log/dnf5.log
INFO: chroot_scan: creating tarball /var/lib/copr-rpmbuild/results/chroot_scan.tar.gz
/bin/tar: Removing leading `/' from member names
INFO: Done(/var/lib/copr-rpmbuild/results/python-geoserver-rest-2.9.1-1.fc42.src.rpm) Config(child) 0 minutes 47 seconds
INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results
INFO: Cleaning up build root ('cleanup_on_success=True')
Start: clean chroot
INFO: unmounting tmpfs.
Finish: clean chroot
Finish: run
Running RPMResults tool
Package info:
{
    "packages": [
        {
            "name": "python3-geoserver-rest+all",
            "epoch": null,
            "version": "2.9.1",
            "release": "1.fc42",
            "arch": "noarch"
        },
        {
            "name": "python-geoserver-rest",
            "epoch": null,
            "version": "2.9.1",
            "release": "1.fc42",
            "arch": "src"
        },
        {
            "name": "python3-geoserver-rest",
            "epoch": null,
            "version": "2.9.1",
            "release": "1.fc42",
            "arch": "noarch"
        },
        {
            "name": "python3-geoserver-rest+dev",
            "epoch": null,
            "version": "2.9.1",
            "release": "1.fc42",
            "arch": "noarch"
        },
        {
            "name": "python3-geoserver-rest+style",
            "epoch": null,
            "version": "2.9.1",
            "release": "1.fc42",
            "arch": "noarch"
        }
    ]
}
RPMResults finished