# ================== # Top-level metadata # ================== %global pybasever 3.10 # pybasever without the dot: %global pyshortver 310 Name: python%{pybasever} Summary: Version %{pybasever} of the Python interpreter URL: https://www.python.org/ # WARNING When rebasing to a new Python version, # remember to update the python3-docs package as well %global general_version %{pybasever}.14 #global prerel ... %global upstream_version %{general_version}%{?prerel} Version: %{general_version}%{?prerel:~%{prerel}} Release: 2.2%{?dist} License: Python-2.0.1 # ================================== # Conditionals controlling the build # ================================== # Note that the bcond macros are named for the CLI option they create. # "%%bcond_without" means "ENABLE by default and create a --without option" # Main Python, i.e. whether this is the main Python version in the distribution # that owns /usr/bin/python3 and other unique paths # This also means the built subpackages are called python3 rather than python3X # By default, this is determined by the %%__default_python3_pkgversion value %if "%{?__default_python3_pkgversion}" == "%{pybasever}" %bcond_without main_python %else %bcond_with main_python %endif # If this is *not* Main Python, should it contain `Provides: python(abi) ...`? # In Fedora no package shall depend on an alternative Python via this tag, so we do not provide it. # In ELN/RHEL/CentOS we want to allow building against alternative stacks, so the Provide is enabled. %if 0%{?fedora} %bcond_with python_abi_provides_for_alt_pythons %else %bcond_without python_abi_provides_for_alt_pythons %endif # When bootstrapping python3, we need to build setuptools. # but setuptools BR python3-devel and that brings in python3-rpm-generators; # python3-rpm-generators needs python3-setuptools, so we cannot have it yet. # # We also use the previous build of Python in "make regen-all" # and in "distutils.tests.test_bdist_rpm". # # Procedure: https://fedoraproject.org/wiki/SIGs/Python/UpgradingPython # # IMPORTANT: When bootstrapping, it's very likely the wheels for pip and # setuptools are not available. Turn off the rpmwheels bcond until # the two packages are built with wheels to get around the issue. %bcond_without bootstrap # Whether to use RPM build wheels from the python-{pip,setuptools}-wheel package # Uses upstream bundled prebuilt wheels otherwise %bcond_without rpmwheels # If the rpmwheels condition is disabled, we use the bundled wheel packages # from Python with the versions below. # This needs to be manually updated when we update Python. %global pip_version 23.0.1 %global setuptools_version 65.5.0 # Expensive optimizations (mainly, profile-guided optimizations) %bcond_without optimizations # Run the test suite in %%check %bcond_without tests # Extra build for debugging the interpreter or C-API extensions # (the -debug subpackages) %bcond_without debug_build # Support for the GDB debugger %bcond_without gdb_hooks # The dbm.gnu module (key-value database) %bcond_without gdbm # Main interpreter loop optimization %bcond_without computed_gotos # Support for the Valgrind debugger/profiler %ifarch %{valgrind_arches} %bcond_without valgrind %else %bcond_with valgrind %endif # ===================== # General global macros # ===================== %if %{with main_python} %global pkgname python3 %global exename python3 %else %global pkgname python%{pybasever} %global exename python%{pybasever} %endif %global pylibdir %{_libdir}/python%{pybasever} %global dynload_dir %{pylibdir}/lib-dynload # ABIFLAGS, LDVERSION and SOABI are in the upstream configure.ac # See PEP 3149 for some background: http://www.python.org/dev/peps/pep-3149/ %global ABIFLAGS_optimized %{nil} %global ABIFLAGS_debug d %global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized} %global LDVERSION_debug %{pybasever}%{ABIFLAGS_debug} # We use the upstream arch triplets, we convert them from %%{_arch}-linux%%{_gnu} %global platform_triplet %{expand:%(echo %{_arch}-linux%{_gnu} | sed -E \\ -e 's/^arm(eb)?-linux-gnueabi$/arm\\1-linux-gnueabihf/' \\ -e 's/^mips64(el)?-linux-gnu$/mips64\\1-linux-gnuabi64/' \\ -e 's/^ppc(64)?(le)?-linux-gnu$/powerpc\\1\\2-linux-gnu/')} %global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}-%{platform_triplet} %global SOABI_debug cpython-%{pyshortver}%{ABIFLAGS_debug}-%{platform_triplet} # All bytecode files are in a __pycache__ subdirectory, with a name # reflecting the version of the bytecode. # See PEP 3147: http://www.python.org/dev/peps/pep-3147/ # For example, # foo/bar.py # has bytecode at: # foo/__pycache__/bar.cpython-%%{pyshortver}.pyc # foo/__pycache__/bar.cpython-%%{pyshortver}.opt-1.pyc # foo/__pycache__/bar.cpython-%%{pyshortver}.opt-2.pyc %global bytecode_suffixes .cpython-%{pyshortver}*.pyc # Python's configure script defines SOVERSION, and this is used in the Makefile # to determine INSTSONAME, the name of the libpython DSO: # LDLIBRARY='libpython$(VERSION).so' # INSTSONAME="$LDLIBRARY".$SOVERSION # We mirror this here in order to make it easier to add the -gdb.py hooks. # (if these get out of sync, the payload of the libs subpackage will fail # and halt the build) %global py_SOVERSION 1.0 %global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION} %global py_INSTSONAME_debug libpython%{LDVERSION_debug}.so.%{py_SOVERSION} # Disable automatic bytecompilation. The python3 binary is not yet be # available in /usr/bin when Python is built. Also, the bytecompilation fails # on files that test invalid syntax. %undefine py_auto_byte_compile # When a main_python build is attempted despite the %%__default_python3_pkgversion value # We undefine magic macros so the python3-... package does not provide wrong python3X-... %if %{with main_python} && ("%{?__default_python3_pkgversion}" != "%{pybasever}") %undefine __pythonname_provides %{warn:Doing a main_python build with wrong %%__default_python3_pkgversion (0%{?__default_python3_pkgversion}, but this is %pyshortver)} %endif %if %{with main_python} # To keep the upgrade path clean, we Obsolete python3.X from the python3 # package and python3.X-foo from individual subpackages. # Note that using Obsoletes without package version is not standard practice. # Here we assert that *any* version of the system's default interpreter is # preferable to an "extra" interpreter. For example, python3-3.6.1 will # replace python3.6-3.6.2. %define unversioned_obsoletes_of_python3_X_if_main() %{expand:\ Obsoletes: python%{pybasever}%{?1:-%{1}}\ } %else %define unversioned_obsoletes_of_python3_X_if_main() %{nil} %endif # Opt-out from https://fedoraproject.org/wiki/Changes/fno-omit-frame-pointer # Python is slower with frame pointers, but we expect to remove this in Python 3.12+ # See https://lists.fedoraproject.org/archives/list/python-devel@lists.fedoraproject.org/thread/6TQYCHMX4FZLF27U5BCEC7IFV6XNBKJP/ # Tracking bugzilla: https://bugzilla.redhat.com/2158729 %undefine _include_frame_pointers # ======================= # Build-time requirements # ======================= # (keep this list alphabetized) BuildRequires: autoconf BuildRequires: bluez-libs-devel BuildRequires: bzip2 BuildRequires: bzip2-devel BuildRequires: desktop-file-utils # See the runtime requirement in the -libs subpackage BuildRequires: expat-devel >= 2.5 BuildRequires: findutils BuildRequires: gcc-c++ %if %{with gdbm} BuildRequires: gdbm-devel %endif BuildRequires: git-core BuildRequires: glibc-all-langpacks BuildRequires: glibc-devel BuildRequires: gmp-devel BuildRequires: gnupg2 BuildRequires: libappstream-glib BuildRequires: libffi-devel BuildRequires: libnsl2-devel BuildRequires: libtirpc-devel BuildRequires: libGL-devel BuildRequires: libuuid-devel BuildRequires: libX11-devel BuildRequires: make BuildRequires: mpdecimal-devel BuildRequires: ncurses-devel BuildRequires: openssl-devel BuildRequires: pkgconfig BuildRequires: readline-devel BuildRequires: redhat-rpm-config >= 127 BuildRequires: sqlite-devel BuildRequires: gdb BuildRequires: tar BuildRequires: tcl-devel BuildRequires: tix-devel BuildRequires: tk-devel BuildRequires: tzdata %if %{with valgrind} BuildRequires: valgrind-devel %endif BuildRequires: xz-devel BuildRequires: zlib-devel BuildRequires: /usr/bin/dtrace # workaround http://bugs.python.org/issue19804 (test_uuid requires ifconfig) BuildRequires: /usr/sbin/ifconfig %if %{with rpmwheels} BuildRequires: %{python_wheel_pkg_prefix}-setuptools-wheel BuildRequires: %{python_wheel_pkg_prefix}-pip-wheel %endif %if %{without bootstrap} # for make regen-all and distutils.tests.test_bdist_rpm # Note that we're not using the %%{pkgname} macro here on purpose, because when # upgrading the main python3 to a new Python version, this would pull in the # old version instead. BuildRequires: python%{pybasever} # for proper automatic provides BuildRequires: python3-rpm-generators %endif # ======================= # Source code and patches # ======================= Source0: %{url}ftp/python/%{general_version}/Python-%{upstream_version}.tar.xz Source1: %{url}ftp/python/%{general_version}/Python-%{upstream_version}.tar.xz.asc # The release manager for Python 3.10 is pablogsal, # but Python 3.10.14 was signed by Łukasz Langa. # pgp_keys_combined.asc contains keys of both release managers. # Upstream issue: https://github.com/python/cpython/issues/117053 # https://keybase.io/pablogsal/pgp_keys.asc # https://keybase.io/ambv/pgp_keys.asc Source2: pgp_keys_combined.asc # A simple script to check timestamps of bytecode files # Run in check section with Python that is currently being built # Originally written by bkabrda Source8: check-pyc-timestamps.py # Desktop menu entry for idle3 Source10: idle3.desktop # AppData file for idle3 Source11: idle3.appdata.xml # (Patches taken from github.com/fedora-python/cpython) # 00001 # d06a8853cf4bae9e115f45e1d531d2dc152c5cc8 # Fixup distutils/unixccompiler.py to remove standard library path from rpath # Was Patch0 in ivazquez' python3000 specfile Patch1: 00001-rpath.patch # 00251 # 8448a0d6edd44d0818b8c02dc603b769b5363e5b # Change user install location # # Set values of base and platbase in sysconfig from /usr # to /usr/local when RPM build is not detected # to make pip and similar tools install into separate location. # # Set values of prefix and exec_prefix in distutils install command # to /usr/local if executable is /usr/bin/python* and RPM build # is not detected to make distutils and pypa/distutils install into separate location. # # Fedora Change: https://fedoraproject.org/wiki/Changes/Making_sudo_pip_safe # Downstream only. # # We've tried to rework in Fedora 36/Python 3.10 to follow https://bugs.python.org/issue43976 # but we have identified serious problems with that approach, # see https://bugzilla.redhat.com/2026979 or https://bugzilla.redhat.com/2097183 # # pypa/distutils integration: https://github.com/pypa/distutils/pull/70 Patch251: 00251-change-user-install-location.patch # 00371 # c1754d9c2750f89cb702e1b63a99201f5f7cff00 # Revert "bpo-1596321: Fix threading._shutdown() for the main thread (GH-28549) (GH-28589)" # # This reverts commit 38c67738c64304928c68d5c2bd78bbb01d979b94. It # introduced regression causing FreeIPA's tests to fail. # # For more info see: # https://bodhi.fedoraproject.org/updates/FEDORA-2021-e152ce5f31 # https://github.com/GrahamDumpleton/mod_wsgi/issues/730 Patch371: 00371-revert-bpo-1596321-fix-threading-_shutdown-for-the-main-thread-gh-28549-gh-28589.patch # 00415 # 9ca4533e0b4a03d919953017026f66c6a060756e # [CVE-2023-27043] gh-102988: Reject malformed addresses in email.parseaddr() (#111116) # # Detect email address parsing errors and return empty tuple to # indicate the parsing error (old API). Add an optional 'strict' # parameter to getaddresses() and parseaddr() functions. Patch by # Thomas Dwyer. Patch415: 00415-cve-2023-27043-gh-102988-reject-malformed-addresses-in-email-parseaddr-111116.patch # 00419 # f13682530cc7e4daec2e40acd56508846fdd3aad # gh-112769: test_zlib: Fix comparison of ZLIB_RUNTIME_VERSION with non-int suffix (GH-112771) (GH-112774) # # zlib-ng defines the version as "1.3.0.zlib-ng". Patch419: 00419-gh-112769-test_zlib-fix-comparison-of-zlib_runtime_version-with-non-int-suffix-gh-112771-gh-112774.patch Patch422: 00422-fix-tests-for-xmlpullparser-with-expat-2-6-0.patch # (New patches go here ^^^) # # When adding new patches to "python" and "python3" in Fedora, EL, etc., # please try to keep the patch numbers in-sync between all specfiles. # # More information, and a patch number catalog, is at: # # https://fedoraproject.org/wiki/SIGs/Python/PythonPatches # # The patches are stored and rebased at: # # https://github.com/fedora-python/cpython # ========================================== # Descriptions, and metadata for subpackages # ========================================== %if %{with main_python} # Description for the python3X SRPM only: %description Python %{pybasever} is an accessible, high-level, dynamically typed, interpreted programming language, designed with an emphasis on code readability. It includes an extensive standard library, and has a vast ecosystem of third-party libraries. %package -n %{pkgname} Summary: Python %{pybasever} interpreter # In order to support multiple Python interpreters for development purposes, # packages with fully versioned naming scheme (e.g. python3.9*) exist for # non-default versions of Python 3. # For consistency, we provide python3.X from python3 as well. Provides: python%{pybasever} = %{version}-%{release} Provides: python%{pybasever}%{?_isa} = %{version}-%{release} %unversioned_obsoletes_of_python3_X_if_main # https://fedoraproject.org/wiki/Changes/Move_usr_bin_python_into_separate_package # https://fedoraproject.org/wiki/Changes/Python_means_Python3 # We recommend /usr/bin/python so users get it by default # Versioned recommends are problematic, and we know that the package requires # python3 back with fixed version, so we just use the path here: Recommends: %{_bindir}/python %endif # Python interpreter packages used to be named (or provide) name pythonXY (e.g. # python39). However, to align it with the executable names and to prepare for # Python 3.10, they were renamed to pythonX.Y (e.g. python3.9, python3.10). We # provide and obsolete the previous names. Provides: python%{pyshortver} = %{version}-%{release} Obsoletes: python%{pyshortver} < %{version}-%{release} %if %{with main_python} || %{with python_abi_provides_for_alt_pythons} # Packages with Python modules in standard locations automatically # depend on python(abi). Provide that here. Provides: python(abi) = %{pybasever} %else # We exclude the `python(abi)` Provides %global __requires_exclude ^python\\(abi\\) = 3\\..+ %global __provides_exclude ^python\\(abi\\) = 3\\..+ %endif Requires: %{pkgname}-libs%{?_isa} = %{version}-%{release} # This prevents ALL subpackages built from this spec to require # /usr/bin/python3* or python(abi). Granularity per subpackage is impossible. # It's intended for the libs package not to drag in the interpreter, see # https://bugzilla.redhat.com/show_bug.cgi?id=1547131 # https://bugzilla.redhat.com/show_bug.cgi?id=1862082 # All other packages require %%{pkgname} explicitly. %global __requires_exclude ^(/usr/bin/python3|python\\(abi\\)) %description -n %{pkgname} Python %{pybasever} is an accessible, high-level, dynamically typed, interpreted programming language, designed with an emphasis on code readability. It includes an extensive standard library, and has a vast ecosystem of third-party libraries. The %{pkgname} package provides the "%{exename}" executable: the reference interpreter for the Python language, version 3. The majority of its standard library is provided in the %{pkgname}-libs package, which should be installed automatically along with %{pkgname}. The remaining parts of the Python standard library are broken out into the %{pkgname}-tkinter and %{pkgname}-test packages, which may need to be installed separately. Documentation for Python is provided in the %{pkgname}-docs package. Packages containing additional libraries for Python are generally named with the "%{pkgname}-" prefix. %if %{with main_python} # https://fedoraproject.org/wiki/Changes/Move_usr_bin_python_into_separate_package # https://fedoraproject.org/wiki/Changes/Python_means_Python3 %package -n python-unversioned-command Summary: The "python" command that runs Python 3 BuildArch: noarch # In theory this could require any python3 version Requires: python3 == %{version}-%{release} # But since we want to provide versioned python, we require exact version Provides: python = %{version}-%{release} # This also save us an explicit conflict for older python3 builds # Also provide the name of the Ubuntu package with the same function, # to be nice to people who temporarily forgot which distro they're on. # C.f. https://packages.ubuntu.com/hirsute/all/python-is-python3/filelist Provides: python-is-python3 = %{version}-%{release} %description -n python-unversioned-command This package contains /usr/bin/python - the "python" command that runs Python 3. %endif # with main_python %package -n %{pkgname}-libs Summary: Python runtime libraries %if %{with rpmwheels} Requires: %{python_wheel_pkg_prefix}-setuptools-wheel Requires: %{python_wheel_pkg_prefix}-pip-wheel %else Provides: bundled(python3dist(pip)) = %{pip_version} Provides: bundled(python3dist(setuptools)) = %{setuptools_version} %endif %unversioned_obsoletes_of_python3_X_if_main libs # There are files in the standard library that have python shebang. # We've filtered the automatic requirement out so libs are installable without # the main package. This however makes it pulled in by default. # See https://bugzilla.redhat.com/show_bug.cgi?id=1547131 Recommends: %{pkgname}%{?_isa} = %{version}-%{release} # tkinter is part of the standard library, # but it is torn out to save an unwanted dependency on tk and X11. # we recommend it when tk is already installed (for better UX) Recommends: (%{pkgname}-tkinter%{?_isa} = %{version}-%{release} if tk%{?_isa}) # The zoneinfo module needs tzdata Requires: tzdata # The requirement on libexpat is generated, but we need to version it. # When built with expat >= 2.6, but installed with older expat, we get: # ImportError: /usr/lib64/python3.X/lib-dynload/pyexpat.cpython-....so: # undefined symbol: XML_SetReparseDeferralEnabled # This breaks many things, including python -m venv. # Other subpackages (like -debug) also need this, but they all depend on -libs. Requires: expat >= 2.5 # Since patch 251 changed from distutils to sysconfig, pip needed to be adapted # The previous versions could cause serious bugs during `sudo pip install --upgrade ...` # Better safe than sorry Conflicts: %{pkgname}-pip < 21.2.3-3 %description -n %{pkgname}-libs This package contains runtime libraries for use by Python: - the majority of the Python standard library - a dynamically linked library for use by applications that embed Python as a scripting language, and by the main "%{exename}" executable %package -n %{pkgname}-devel Summary: Libraries and header files needed for Python development Requires: %{pkgname} = %{version}-%{release} Requires: %{pkgname}-libs%{?_isa} = %{version}-%{release} # The RPM related dependencies bring nothing to a non-RPM Python developer # But we want them when packages BuildRequire python3-devel # 3.10-9 macros started to set $RPM_BUILD_ROOT when expanding macros like %%python3_sitearch, # which is necessary since patch 251 changed from distutils to sysconfig Requires: (python-rpm-macros >= 3.9 if rpm-build) Requires: (python3-rpm-macros >= 3.9 if rpm-build) Requires: (pyproject-rpm-macros if rpm-build) %unversioned_obsoletes_of_python3_X_if_main devel %if %{with main_python} # Python developers are very likely to need pip Recommends: %{pkgname}-pip %endif # tox users are likely to need the devel subpackage Supplements: tox %if %{without bootstrap} Requires: (python3-rpm-generators if rpm-build) %endif Provides: %{pkgname}-2to3 = %{version}-%{release} %if %{with main_python} Provides: 2to3 = %{version}-%{release} %endif Conflicts: %{pkgname} < %{version}-%{release} %description -n %{pkgname}-devel This package contains the header files and configuration needed to compile Python extension modules (typically written in C or C++), to embed Python into other programs, and to make binary distributions for Python libraries. It also contains the necessary macros to build RPM packages with Python modules and 2to3 tool, an automatic source converter from Python 2.X. %package -n %{pkgname}-idle Summary: A basic graphical development environment for Python Requires: %{pkgname} = %{version}-%{release} Requires: %{pkgname}-tkinter = %{version}-%{release} %unversioned_obsoletes_of_python3_X_if_main idle %if %{with main_python} Provides: idle3 = %{version}-%{release} Provides: idle = %{version}-%{release} %endif Provides: %{pkgname}-tools = %{version}-%{release} Provides: %{pkgname}-tools%{?_isa} = %{version}-%{release} Obsoletes: %{pkgname}-tools < %{version}-%{release} %description -n %{pkgname}-idle IDLE is Python’s Integrated Development and Learning Environment. IDLE has the following features: Python shell window (interactive interpreter) with colorizing of code input, output, and error messages; multi-window text editor with multiple undo, Python colorizing, smart indent, call tips, auto completion, and other features; search within any window, replace within editor windows, and search through multiple files (grep); debugger with persistent breakpoints, stepping, and viewing of global and local namespaces; configuration, browsers, and other dialogs. %package -n %{pkgname}-tkinter Summary: A GUI toolkit for Python Requires: %{pkgname} = %{version}-%{release} %unversioned_obsoletes_of_python3_X_if_main tkinter # The importable module "turtle" is here, so provide python3-turtle. # (We don't provide python3-turtledemo, that's not too useful when imported.) %py_provides %{pkgname}-turtle %description -n %{pkgname}-tkinter The Tkinter (Tk interface) library is a graphical user interface toolkit for the Python programming language. %package -n %{pkgname}-test Summary: The self-test suite for the main python3 package Requires: %{pkgname} = %{version}-%{release} Requires: %{pkgname}-libs%{?_isa} = %{version}-%{release} %unversioned_obsoletes_of_python3_X_if_main test %description -n %{pkgname}-test The self-test suite for the Python interpreter. This is only useful to test Python itself. For testing general Python code, you should use the unittest module from %{pkgname}-libs, or a library such as %{pkgname}-pytest. %if %{with debug_build} %package -n %{pkgname}-debug Summary: Debug version of the Python runtime # The debug build is an all-in-one package version of the regular build, and # shares the same .py/.pyc files and directories as the regular build. Hence # we depend on all of the subpackages of the regular build: Requires: %{pkgname}%{?_isa} = %{version}-%{release} Requires: %{pkgname}-libs%{?_isa} = %{version}-%{release} Requires: %{pkgname}-devel%{?_isa} = %{version}-%{release} Requires: %{pkgname}-test%{?_isa} = %{version}-%{release} Requires: %{pkgname}-tkinter%{?_isa} = %{version}-%{release} Requires: %{pkgname}-idle%{?_isa} = %{version}-%{release} %unversioned_obsoletes_of_python3_X_if_main debug %description -n %{pkgname}-debug python3-debug provides a version of the Python runtime with numerous debugging features enabled, aimed at advanced Python users such as developers of Python extension modules. This version uses more memory and will be slower than the regular Python build, but is useful for tracking down reference-counting issues and other bugs. The debug build shares installation directories with the standard Python runtime. Python modules -- source (.py), bytecode (.pyc), and C-API extensions (.cpython*.so) -- are compatible between this and the standard version of Python. The debug runtime additionally supports debug builds of C-API extensions (with the "d" ABI flag) for debugging issues in those extensions. %endif # with debug_build # ====================================================== # The prep phase of the build: # ====================================================== %prep %gpgverify -k2 -s1 -d0 %autosetup -S git_am -n Python-%{upstream_version} %if %{with rpmwheels} rm Lib/ensurepip/_bundled/pip-%{pip_version}-py3-none-any.whl rm Lib/ensurepip/_bundled/setuptools-%{setuptools_version}-py3-none-any.whl %endif # Remove all exe files to ensure we are not shipping prebuilt binaries # note that those are only used to create Microsoft Windows installers # and that functionality is broken on Linux anyway find -name '*.exe' -print -delete # Remove bundled libraries to ensure that we're using the system copy. rm -r Modules/expat rm -r Modules/_decimal/libmpdec # Remove files that should be generated by the build # (This is after patching, so that we can use patches directly from upstream) rm configure pyconfig.h.in # ====================================================== # Configuring and building the code: # ====================================================== %build # The build process embeds version info extracted from the Git repository # into the Py_GetBuildInfo and sys.version strings. # Our Git repository is artificial, so we don't want that. # Tell configure to not use git. export HAS_GIT=not-found # Regenerate the configure script and pyconfig.h.in autoconf autoheader # Remember the current directory (which has sources and the configure script), # so we can refer to it after we "cd" elsewhere. topdir=$(pwd) # Get proper option names from bconds %if %{with computed_gotos} %global computed_gotos_flag yes %else %global computed_gotos_flag no %endif %if %{with optimizations} %global optimizations_flag "--enable-optimizations" %else %global optimizations_flag "--disable-optimizations" %endif # Set common compiler/linker flags # We utilize the %%extension_...flags macros here so users building C/C++ # extensions with our python won't get all the compiler/linker flags used # in Fedora RPMs. # Standard library built here will still use the %%build_...flags, # Fedora packages utilizing %%py3_build will use them as well # https://fedoraproject.org/wiki/Changes/Python_Extension_Flags # https://fedoraproject.org/wiki/Changes/Python_Extension_Flags_Reduction export CFLAGS="%{extension_cflags}" export CFLAGS_NODIST="%{build_cflags} -D_GNU_SOURCE -fPIC -fwrapv" export CXXFLAGS="%{extension_cxxflags}" export CPPFLAGS="$(pkg-config --cflags-only-I libffi)" export OPT="%{extension_cflags}" export LINKCC="gcc" export CFLAGS="$CFLAGS $(pkg-config --cflags openssl)" export LDFLAGS="%{extension_ldflags} $(pkg-config --libs-only-L openssl)" export LDFLAGS_NODIST="%{build_ldflags} -g $(pkg-config --libs-only-L openssl)" # We can build several different configurations of Python: regular and debug. # Define a common function that does one build: BuildPython() { ConfName=$1 ExtraConfigArgs=$2 MoreCFlags=$3 # Each build is done in its own directory ConfDir=build/$ConfName echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName mkdir -p $ConfDir pushd $ConfDir # Normally, %%configure looks for the "configure" script in the current # directory. # Since we changed directories, we need to tell %%configure where to look. %global _configure $topdir/configure # A workaround for https://bugs.python.org/issue39761 export DFLAGS=" " %configure \ --with-platlibdir=%{_lib} \ --enable-ipv6 \ --enable-shared \ --with-computed-gotos=%{computed_gotos_flag} \ --with-dbmliborder=gdbm:ndbm:bdb \ --with-system-expat \ --with-system-ffi \ --with-system-libmpdec \ --enable-loadable-sqlite-extensions \ --with-dtrace \ --with-lto \ --with-ssl-default-suites=openssl \ --without-static-libpython \ %if %{with rpmwheels} --with-wheel-pkg-dir=%{python_wheel_dir} \ %endif %if %{with valgrind} --with-valgrind \ %endif $ExtraConfigArgs \ %{nil} %global flags_override EXTRA_CFLAGS="$MoreCFlags" CFLAGS_NODIST="$CFLAGS_NODIST $MoreCFlags" %if %{without bootstrap} # Regenerate generated files (needs python3) %make_build %{flags_override} regen-all PYTHON_FOR_REGEN="python%{pybasever}" %endif # Invoke the build %make_build %{flags_override} popd echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfName } # Call the above to build each configuration. %if %{with debug_build} # The debug build is compiled with the lowest level of optimizations as to not optimize # out frames. We also suppress the warnings as the default distro value of the FORTIFY_SOURCE # option produces too many warnings when compiling at the O0 optimization level. # See also: https://bugzilla.redhat.com/show_bug.cgi?id=1818857 BuildPython debug \ "--without-ensurepip --with-pydebug" \ "-O0 -Wno-cpp" %endif # with debug_build BuildPython optimized \ "--without-ensurepip %{optimizations_flag}" \ "" # ====================================================== # Installing the built code: # ====================================================== %install # As in %%build, remember the current directory topdir=$(pwd) # We install a collection of hooks for gdb that make it easier to debug # executables linked against libpython3* (such as /usr/bin/python3 itself) # # These hooks are implemented in Python itself (though they are for the version # of python that gdb is linked with) # # gdb-archer looks for them in the same path as the ELF file or its .debug # file, with a -gdb.py suffix. # We put them next to the debug file, because ldconfig would complain if # it found non-library files directly in /usr/lib/ # (see https://bugzilla.redhat.com/show_bug.cgi?id=562980) # # We'll put these files in the debuginfo package by installing them to e.g.: # /usr/lib/debug/usr/lib/libpython3.2.so.1.0.debug-gdb.py # (note that the debug path is /usr/lib/debug for both 32/64 bit) # # See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more # information %if %{with gdb_hooks} DirHoldingGdbPy=%{_usr}/lib/debug/%{_libdir} mkdir -p %{buildroot}$DirHoldingGdbPy %endif # with gdb_hooks # Multilib support for pyconfig.h # 32- and 64-bit versions of pyconfig.h are different. For multilib support # (making it possible to install 32- and 64-bit versions simultaneously), # we need to install them under different filenames, and to make the common # "pyconfig.h" include the right file based on architecture. # See https://bugzilla.redhat.com/show_bug.cgi?id=192747 # Filanames are defined here: %global _pyconfig32_h pyconfig-32.h %global _pyconfig64_h pyconfig-64.h %global _pyconfig_h pyconfig-%{__isa_bits}.h # Use a common function to do an install for all our configurations: InstallPython() { ConfName=$1 PyInstSoName=$2 MoreCFlags=$3 LDVersion=$4 # Switch to the directory with this configuration's built files ConfDir=build/$ConfName echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName mkdir -p $ConfDir pushd $ConfDir %make_install EXTRA_CFLAGS="$MoreCFlags" popd %if %{with gdb_hooks} # See comment on $DirHoldingGdbPy above PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName-%{version}-%{release}.%{_arch}.debug-gdb.py cp Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy %endif # with gdb_hooks # Rename the -devel script that differs on different arches to arch specific name mv %{buildroot}%{_bindir}/python${LDVersion}-{,`uname -m`-}config echo -e '#!/bin/sh\nexec %{_bindir}/python'${LDVersion}'-`uname -m`-config "$@"' > \ %{buildroot}%{_bindir}/python${LDVersion}-config chmod +x %{buildroot}%{_bindir}/python${LDVersion}-config # Make python3-devel multilib-ready mv %{buildroot}%{_includedir}/python${LDVersion}/pyconfig.h \ %{buildroot}%{_includedir}/python${LDVersion}/%{_pyconfig_h} cat > %{buildroot}%{_includedir}/python${LDVersion}/pyconfig.h << EOF #include #if __WORDSIZE == 32 #include "%{_pyconfig32_h}" #elif __WORDSIZE == 64 #include "%{_pyconfig64_h}" #else #error "Unknown word size" #endif EOF echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName } # Install the "debug" build first; any common files will be overridden with # later builds %if %{with debug_build} InstallPython debug \ %{py_INSTSONAME_debug} \ -O0 \ %{LDVERSION_debug} %endif # with debug_build # Now the optimized build: InstallPython optimized \ %{py_INSTSONAME_optimized} \ "" \ %{LDVERSION_optimized} # Install directories for additional packages install -d -m 0755 %{buildroot}%{pylibdir}/site-packages/__pycache__ %if "%{_lib}" == "lib64" # The 64-bit version needs to create "site-packages" in /usr/lib/ (for # pure-Python modules) as well as in /usr/lib64/ (for packages with extension # modules). # Note that rpmlint will complain about hardcoded library path; # this is intentional. install -d -m 0755 %{buildroot}%{_prefix}/lib/python%{pybasever}/site-packages/__pycache__ %endif %if %{with main_python} # add idle3 to menu install -D -m 0644 Lib/idlelib/Icons/idle_16.png %{buildroot}%{_datadir}/icons/hicolor/16x16/apps/idle3.png install -D -m 0644 Lib/idlelib/Icons/idle_32.png %{buildroot}%{_datadir}/icons/hicolor/32x32/apps/idle3.png install -D -m 0644 Lib/idlelib/Icons/idle_48.png %{buildroot}%{_datadir}/icons/hicolor/48x48/apps/idle3.png install -D -m 0644 Lib/idlelib/Icons/idle_256.png %{buildroot}%{_datadir}/icons/hicolor/256x256/apps/idle3.png desktop-file-install --dir=%{buildroot}%{_datadir}/applications %{SOURCE10} # Install and validate appdata file mkdir -p %{buildroot}%{_metainfodir} cp -a %{SOURCE11} %{buildroot}%{_metainfodir} appstream-util validate-relax --nonet %{buildroot}%{_metainfodir}/idle3.appdata.xml %endif # Make sure distutils looks at the right pyconfig.h file # See https://bugzilla.redhat.com/show_bug.cgi?id=201434 # Similar for sysconfig: sysconfig.get_config_h_filename tries to locate # pyconfig.h so it can be parsed, and needs to do this at runtime in site.py # when python starts up (see https://bugzilla.redhat.com/show_bug.cgi?id=653058) # # Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h # variants: sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \ %{buildroot}%{pylibdir}/distutils/sysconfig.py \ %{buildroot}%{pylibdir}/sysconfig.py # Install pathfix.py to bindir # See https://github.com/fedora-python/python-rpm-porting/issues/24 cp -p Tools/scripts/pathfix.py %{buildroot}%{_bindir}/pathfix%{pybasever}.py # Install i18n tools to bindir # They are also in python2, so we version them # https://bugzilla.redhat.com/show_bug.cgi?id=1571474 for tool in pygettext msgfmt; do cp -p Tools/i18n/${tool}.py %{buildroot}%{_bindir}/${tool}%{pybasever}.py ln -s ${tool}%{pybasever}.py %{buildroot}%{_bindir}/${tool}3.py done # Switch all shebangs to refer to the specific Python version. # This currently only covers files matching ^[a-zA-Z0-9_]+\.py$, # so handle files named using other naming scheme separately. LD_LIBRARY_PATH=./build/optimized ./build/optimized/python \ Tools/scripts/pathfix.py \ -i "%{_bindir}/python%{pybasever}" -pn \ %{buildroot} \ %{buildroot}%{_bindir}/*%{pybasever}.py \ %{?with_gdb_hooks:%{buildroot}$DirHoldingGdbPy/*.py} # Remove shebang lines from .py files that aren't executable, and # remove executability from .py files that don't have a shebang line: find %{buildroot} -name \*.py \ \( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \ -print -exec sed -i '1d' {} \; \) -o \( \ -perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \ -exec chmod a-x {} \; \) \) # Get rid of DOS batch files: find %{buildroot} -name \*.bat -exec rm {} \; # Get rid of backup files: find %{buildroot}/ -name "*~" -exec rm -f {} \; find . -name "*~" -exec rm -f {} \; # Do bytecompilation with the newly installed interpreter. # This is similar to the script in macros.pybytecompile # compile *.pyc # Python CMD line options: # -s - don't add user site directory to sys.path # -B - don't write .pyc files on import # Clamp the source mtime first, see https://fedoraproject.org/wiki/Changes/ReproducibleBuildsClampMtimes # The clamp_source_mtime module is only guaranteed to exist on Fedoras that enabled this option: %if 0%{?clamp_mtime_to_source_date_epoch} LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ PYTHONPATH="%{_rpmconfigdir}/redhat" \ %{buildroot}%{_bindir}/python%{pybasever} -s -B -m clamp_source_mtime %{buildroot}%{pylibdir} %endif # compileall CMD line options: # -f - force rebuild even if timestamps are up to date # -o - optimization levels to run compilation with # -s - part of path to left-strip from path to source file (buildroot) # -p - path to add as prefix to path to source file (/ to make it absolute) # --hardlink-dupes - hardlink different optimization level pycs together if identical (saves space) # --invalidation-mode - we prefer the timestamp invalidation mode for performance reasons # -x - skip test modules with SyntaxErrors (taken from the Makefile) LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ %{buildroot}%{_bindir}/python%{pybasever} -s -B -m compileall \ -f %{_smp_mflags} -o 0 -o 1 -o 2 -s %{buildroot} -p / %{buildroot} --hardlink-dupes --invalidation-mode=timestamp \ -x 'bad_coding|badsyntax|site-packages|lib2to3/tests/data' # Turn this BRP off, it is done by compileall2 --hardlink-dupes above %global __brp_python_hardlink %{nil} # Since we have pathfix.py in bindir, this is created, but we don't want it rm -rf %{buildroot}%{_bindir}/__pycache__ # Fixup permissions for shared libraries from non-standard 555 to standard 755: find %{buildroot} -perm 555 -exec chmod 755 {} \; # Create "/usr/bin/python3-debug", a symlink to the python3 debug binary, to # avoid the user having to know the precise version and ABI flags. # See e.g. https://bugzilla.redhat.com/show_bug.cgi?id=676748 %if %{with debug_build} && %{with main_python} ln -s \ %{_bindir}/python%{LDVERSION_debug} \ %{buildroot}%{_bindir}/python3-debug %endif %if %{without main_python} # Remove stuff that would conflict with python3 package rm %{buildroot}%{_bindir}/python3 rm %{buildroot}%{_bindir}/pydoc3 rm %{buildroot}%{_bindir}/pygettext3.py rm %{buildroot}%{_bindir}/msgfmt3.py rm %{buildroot}%{_bindir}/idle3 rm %{buildroot}%{_bindir}/python3-* rm %{buildroot}%{_bindir}/2to3 rm %{buildroot}%{_libdir}/libpython3.so rm %{buildroot}%{_mandir}/man1/python3.1 rm %{buildroot}%{_libdir}/pkgconfig/python3.pc rm %{buildroot}%{_libdir}/pkgconfig/python3-embed.pc %else # Link the unversioned stuff # https://fedoraproject.org/wiki/Changes/Python_means_Python3 ln -s ./python3 %{buildroot}%{_bindir}/python ln -s ./pydoc3 %{buildroot}%{_bindir}/pydoc ln -s ./pygettext3.py %{buildroot}%{_bindir}/pygettext.py ln -s ./msgfmt3.py %{buildroot}%{_bindir}/msgfmt.py ln -s ./idle3 %{buildroot}%{_bindir}/idle ln -s ./python3-config %{buildroot}%{_bindir}/python-config ln -s ./python3.1 %{buildroot}%{_mandir}/man1/python.1 ln -s ./python3.pc %{buildroot}%{_libdir}/pkgconfig/python.pc ln -s ./pathfix%{pybasever}.py %{buildroot}%{_bindir}/pathfix.py %if %{with debug_build} ln -s ./python3-debug %{buildroot}%{_bindir}/python-debug %endif %endif # Remove large, autogenerated sources and keep only the non-optimized pycache for file in %{buildroot}%{pylibdir}/pydoc_data/topics.py $(grep --include='*.py' -lr %{buildroot}%{pylibdir}/encodings -e 'Python Character Mapping Codec .* from .* with gencodec.py'); do directory=$(dirname ${file}) module=$(basename ${file%%.py}) mv ${directory}/{__pycache__/${module}.cpython-%{pyshortver}.pyc,${module}.pyc} rm ${directory}/{__pycache__/${module}.cpython-%{pyshortver}.opt-?.pyc,${module}.py} done # ====================================================== # Checks for packaging issues # ====================================================== %check # first of all, check timestamps of bytecode files find %{buildroot} -type f -a -name "*.py" -print0 | \ LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \ PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \ xargs -0 %{buildroot}%{_bindir}/python%{pybasever} %{SOURCE8} # Ensure that the curses module was linked against libncursesw.so, rather than # libncurses.so # See https://bugzilla.redhat.com/show_bug.cgi?id=539917 ldd %{buildroot}/%{dynload_dir}/_curses*.so \ | grep curses \ | grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1) # Ensure that the debug modules are linked against the debug libpython, and # likewise for the optimized modules and libpython: for Module in %{buildroot}/%{dynload_dir}/*.so ; do case $Module in *.%{SOABI_debug}) ldd $Module | grep %{py_INSTSONAME_optimized} && (echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1) ;; *.%{SOABI_optimized}) ldd $Module | grep %{py_INSTSONAME_debug} && (echo Optimized module $Module linked against debug %{py_INSTSONAME_debug} ; exit 1) ;; esac done # ====================================================== # Running the upstream test suite # ====================================================== topdir=$(pwd) CheckPython() { ConfName=$1 ConfDir=$(pwd)/build/$ConfName echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName # Note that we're running the tests using the version of the code in the # builddir, not in the buildroot. # Show some info, helpful for debugging test failures LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.pythoninfo # Run the upstream test suite # --timeout=1800: kill test running for longer than 30 minutes # test_distutils # distutils.tests.test_bdist_rpm tests fail when bootstraping the Python # package: rpmbuild requires /usr/bin/pythonX.Y to be installed LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.regrtest \ -wW --slowest -j0 --timeout=1800 \ %if %{with bootstrap} -x test_distutils \ %endif %ifarch %{mips64} -x test_ctypes \ %endif echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName } %if %{with tests} # Check each of the configurations: %if %{with debug_build} CheckPython debug %endif # with debug_build CheckPython optimized %endif # with tests %files -n %{pkgname} %doc README.rst %if %{with main_python} %{_bindir}/pydoc* %{_bindir}/python3 %else %{_bindir}/pydoc%{pybasever} %endif %{_bindir}/python%{pybasever} %{_bindir}/python%{LDVERSION_optimized} %{_mandir}/*/*3* %if %{with main_python} %files -n python-unversioned-command %{_bindir}/python %{_mandir}/*/python.1* %endif %files -n %{pkgname}-libs %doc README.rst %dir %{pylibdir} %dir %{dynload_dir} %license %{pylibdir}/LICENSE.txt %{pylibdir}/lib2to3 %exclude %{pylibdir}/lib2to3/tests %dir %{pylibdir}/unittest/ %dir %{pylibdir}/unittest/__pycache__/ %{pylibdir}/unittest/*.py %{pylibdir}/unittest/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/asyncio/ %dir %{pylibdir}/asyncio/__pycache__/ %{pylibdir}/asyncio/*.py %{pylibdir}/asyncio/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/venv/ %dir %{pylibdir}/venv/__pycache__/ %{pylibdir}/venv/*.py %{pylibdir}/venv/__pycache__/*%{bytecode_suffixes} %{pylibdir}/venv/scripts %{pylibdir}/wsgiref %{pylibdir}/xmlrpc %dir %{pylibdir}/ensurepip/ %dir %{pylibdir}/ensurepip/__pycache__/ %{pylibdir}/ensurepip/*.py %{pylibdir}/ensurepip/__pycache__/*%{bytecode_suffixes} %if %{with rpmwheels} %exclude %{pylibdir}/ensurepip/_bundled %else %dir %{pylibdir}/ensurepip/_bundled %{pylibdir}/ensurepip/_bundled/pip-%{pip_version}-py3-none-any.whl %{pylibdir}/ensurepip/_bundled/setuptools-%{setuptools_version}-py3-none-any.whl %{pylibdir}/ensurepip/_bundled/__init__.py %{pylibdir}/ensurepip/_bundled/__pycache__/*%{bytecode_suffixes} %endif %dir %{pylibdir}/concurrent/ %dir %{pylibdir}/concurrent/__pycache__/ %{pylibdir}/concurrent/*.py %{pylibdir}/concurrent/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/concurrent/futures/ %dir %{pylibdir}/concurrent/futures/__pycache__/ %{pylibdir}/concurrent/futures/*.py %{pylibdir}/concurrent/futures/__pycache__/*%{bytecode_suffixes} %{pylibdir}/pydoc_data %{dynload_dir}/_blake2.%{SOABI_optimized}.so %{dynload_dir}/_md5.%{SOABI_optimized}.so %{dynload_dir}/_sha1.%{SOABI_optimized}.so %{dynload_dir}/_sha256.%{SOABI_optimized}.so %{dynload_dir}/_sha3.%{SOABI_optimized}.so %{dynload_dir}/_sha512.%{SOABI_optimized}.so %{dynload_dir}/_asyncio.%{SOABI_optimized}.so %{dynload_dir}/_bisect.%{SOABI_optimized}.so %{dynload_dir}/_bz2.%{SOABI_optimized}.so %{dynload_dir}/_codecs_cn.%{SOABI_optimized}.so %{dynload_dir}/_codecs_hk.%{SOABI_optimized}.so %{dynload_dir}/_codecs_iso2022.%{SOABI_optimized}.so %{dynload_dir}/_codecs_jp.%{SOABI_optimized}.so %{dynload_dir}/_codecs_kr.%{SOABI_optimized}.so %{dynload_dir}/_codecs_tw.%{SOABI_optimized}.so %{dynload_dir}/_contextvars.%{SOABI_optimized}.so %{dynload_dir}/_crypt.%{SOABI_optimized}.so %{dynload_dir}/_csv.%{SOABI_optimized}.so %{dynload_dir}/_ctypes.%{SOABI_optimized}.so %{dynload_dir}/_curses.%{SOABI_optimized}.so %{dynload_dir}/_curses_panel.%{SOABI_optimized}.so %{dynload_dir}/_dbm.%{SOABI_optimized}.so %{dynload_dir}/_decimal.%{SOABI_optimized}.so %{dynload_dir}/_elementtree.%{SOABI_optimized}.so %if %{with gdbm} %{dynload_dir}/_gdbm.%{SOABI_optimized}.so %endif %{dynload_dir}/_hashlib.%{SOABI_optimized}.so %{dynload_dir}/_heapq.%{SOABI_optimized}.so %{dynload_dir}/_json.%{SOABI_optimized}.so %{dynload_dir}/_lsprof.%{SOABI_optimized}.so %{dynload_dir}/_lzma.%{SOABI_optimized}.so %{dynload_dir}/_multibytecodec.%{SOABI_optimized}.so %{dynload_dir}/_multiprocessing.%{SOABI_optimized}.so %{dynload_dir}/_opcode.%{SOABI_optimized}.so %{dynload_dir}/_pickle.%{SOABI_optimized}.so %{dynload_dir}/_posixsubprocess.%{SOABI_optimized}.so %{dynload_dir}/_queue.%{SOABI_optimized}.so %{dynload_dir}/_random.%{SOABI_optimized}.so %{dynload_dir}/_socket.%{SOABI_optimized}.so %{dynload_dir}/_sqlite3.%{SOABI_optimized}.so %{dynload_dir}/_ssl.%{SOABI_optimized}.so %{dynload_dir}/_statistics.%{SOABI_optimized}.so %{dynload_dir}/_struct.%{SOABI_optimized}.so %{dynload_dir}/array.%{SOABI_optimized}.so %{dynload_dir}/audioop.%{SOABI_optimized}.so %{dynload_dir}/binascii.%{SOABI_optimized}.so %{dynload_dir}/cmath.%{SOABI_optimized}.so %{dynload_dir}/_datetime.%{SOABI_optimized}.so %{dynload_dir}/fcntl.%{SOABI_optimized}.so %{dynload_dir}/grp.%{SOABI_optimized}.so %{dynload_dir}/math.%{SOABI_optimized}.so %{dynload_dir}/mmap.%{SOABI_optimized}.so %{dynload_dir}/nis.%{SOABI_optimized}.so %{dynload_dir}/ossaudiodev.%{SOABI_optimized}.so %{dynload_dir}/_posixshmem.%{SOABI_optimized}.so %{dynload_dir}/pyexpat.%{SOABI_optimized}.so %{dynload_dir}/readline.%{SOABI_optimized}.so %{dynload_dir}/resource.%{SOABI_optimized}.so %{dynload_dir}/select.%{SOABI_optimized}.so %{dynload_dir}/spwd.%{SOABI_optimized}.so %{dynload_dir}/syslog.%{SOABI_optimized}.so %{dynload_dir}/termios.%{SOABI_optimized}.so %{dynload_dir}/unicodedata.%{SOABI_optimized}.so %{dynload_dir}/_uuid.%{SOABI_optimized}.so %{dynload_dir}/xxlimited.%{SOABI_optimized}.so %{dynload_dir}/xxlimited_35.%{SOABI_optimized}.so %{dynload_dir}/_xxsubinterpreters.%{SOABI_optimized}.so %{dynload_dir}/zlib.%{SOABI_optimized}.so %{dynload_dir}/_zoneinfo.%{SOABI_optimized}.so %dir %{pylibdir}/site-packages/ %dir %{pylibdir}/site-packages/__pycache__/ %{pylibdir}/site-packages/README.txt %if %{with debug_build} %exclude %{pylibdir}/_sysconfigdata_%{ABIFLAGS_debug}_linux_%{platform_triplet}.py %exclude %{pylibdir}/__pycache__/_sysconfigdata_%{ABIFLAGS_debug}_linux_%{platform_triplet}%{bytecode_suffixes} %endif %{pylibdir}/*.py %dir %{pylibdir}/__pycache__/ %{pylibdir}/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/collections/ %dir %{pylibdir}/collections/__pycache__/ %{pylibdir}/collections/*.py %{pylibdir}/collections/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/ctypes/ %dir %{pylibdir}/ctypes/__pycache__/ %{pylibdir}/ctypes/*.py %{pylibdir}/ctypes/__pycache__/*%{bytecode_suffixes} %{pylibdir}/ctypes/macholib %{pylibdir}/curses %dir %{pylibdir}/dbm/ %dir %{pylibdir}/dbm/__pycache__/ %{pylibdir}/dbm/*.py %{pylibdir}/dbm/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/distutils/ %dir %{pylibdir}/distutils/__pycache__/ %{pylibdir}/distutils/*.py %{pylibdir}/distutils/__pycache__/*%{bytecode_suffixes} %{pylibdir}/distutils/README %{pylibdir}/distutils/command %dir %{pylibdir}/email/ %dir %{pylibdir}/email/__pycache__/ %{pylibdir}/email/*.py %{pylibdir}/email/__pycache__/*%{bytecode_suffixes} %{pylibdir}/email/mime %doc %{pylibdir}/email/architecture.rst %{pylibdir}/encodings %{pylibdir}/html %{pylibdir}/http %dir %{pylibdir}/importlib/ %dir %{pylibdir}/importlib/__pycache__/ %{pylibdir}/importlib/*.py %{pylibdir}/importlib/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/importlib/metadata/ %dir %{pylibdir}/importlib/metadata/__pycache__/ %{pylibdir}/importlib/metadata/*.py %{pylibdir}/importlib/metadata/__pycache__/*%{bytecode_suffixes} %dir %{pylibdir}/json/ %dir %{pylibdir}/json/__pycache__/ %{pylibdir}/json/*.py %{pylibdir}/json/__pycache__/*%{bytecode_suffixes} %{pylibdir}/logging %{pylibdir}/multiprocessing %dir %{pylibdir}/sqlite3/ %dir %{pylibdir}/sqlite3/__pycache__/ %{pylibdir}/sqlite3/*.py %{pylibdir}/sqlite3/__pycache__/*%{bytecode_suffixes} %exclude %{pylibdir}/turtle.py %exclude %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes} %{pylibdir}/urllib %{pylibdir}/xml %{pylibdir}/zoneinfo %if "%{_lib}" == "lib64" %attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever} %attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages %attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages/__pycache__/ %endif # "Makefile" and the config-32/64.h file are needed by # distutils/sysconfig.py:_init_posix(), so we include them in the core # package, along with their parent directories (bug 531901): %dir %{pylibdir}/config-%{LDVERSION_optimized}-%{platform_triplet}/ %{pylibdir}/config-%{LDVERSION_optimized}-%{platform_triplet}/Makefile %dir %{_includedir}/python%{LDVERSION_optimized}/ %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h} %{_libdir}/%{py_INSTSONAME_optimized} %if %{with main_python} %{_libdir}/libpython3.so %endif %files -n %{pkgname}-devel %{pylibdir}/config-%{LDVERSION_optimized}-%{platform_triplet}/* %exclude %{pylibdir}/config-%{LDVERSION_optimized}-%{platform_triplet}/Makefile %exclude %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h} %{_includedir}/python%{LDVERSION_optimized}/*.h %{_includedir}/python%{LDVERSION_optimized}/internal/ %{_includedir}/python%{LDVERSION_optimized}/cpython/ %doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit %if %{with main_python} %{_bindir}/2to3 %{_bindir}/python3-config %{_bindir}/python-config %{_libdir}/pkgconfig/python3.pc %{_libdir}/pkgconfig/python.pc %{_libdir}/pkgconfig/python3-embed.pc %{_bindir}/pathfix.py %{_bindir}/pygettext3.py %{_bindir}/pygettext.py %{_bindir}/msgfmt3.py %{_bindir}/msgfmt.py %endif %{_bindir}/2to3-%{pybasever} %{_bindir}/pathfix%{pybasever}.py %{_bindir}/pygettext%{pybasever}.py %{_bindir}/msgfmt%{pybasever}.py %{_bindir}/python%{pybasever}-config %{_bindir}/python%{LDVERSION_optimized}-config %{_bindir}/python%{LDVERSION_optimized}-*-config %{_libdir}/libpython%{LDVERSION_optimized}.so %{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc %{_libdir}/pkgconfig/python-%{LDVERSION_optimized}-embed.pc %{_libdir}/pkgconfig/python-%{pybasever}.pc %{_libdir}/pkgconfig/python-%{pybasever}-embed.pc %files -n %{pkgname}-idle %if %{with main_python} %{_bindir}/idle* %else %{_bindir}/idle%{pybasever} %endif %{pylibdir}/idlelib %if %{with main_python} %{_metainfodir}/idle3.appdata.xml %{_datadir}/applications/idle3.desktop %{_datadir}/icons/hicolor/*/apps/idle3.* %endif %files -n %{pkgname}-tkinter %{pylibdir}/tkinter %exclude %{pylibdir}/tkinter/test %{dynload_dir}/_tkinter.%{SOABI_optimized}.so %{pylibdir}/turtle.py %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes} %dir %{pylibdir}/turtledemo %{pylibdir}/turtledemo/*.py %{pylibdir}/turtledemo/*.cfg %dir %{pylibdir}/turtledemo/__pycache__/ %{pylibdir}/turtledemo/__pycache__/*%{bytecode_suffixes} %files -n %{pkgname}-test %{pylibdir}/ctypes/test %{pylibdir}/distutils/tests %{pylibdir}/sqlite3/test %{pylibdir}/test %{dynload_dir}/_ctypes_test.%{SOABI_optimized}.so %{dynload_dir}/_testbuffer.%{SOABI_optimized}.so %{dynload_dir}/_testcapi.%{SOABI_optimized}.so %{dynload_dir}/_testclinic.%{SOABI_optimized}.so %{dynload_dir}/_testimportmultiple.%{SOABI_optimized}.so %{dynload_dir}/_testinternalcapi.%{SOABI_optimized}.so %{dynload_dir}/_testmultiphase.%{SOABI_optimized}.so %{dynload_dir}/_xxtestfuzz.%{SOABI_optimized}.so %{pylibdir}/lib2to3/tests %{pylibdir}/tkinter/test %{pylibdir}/unittest/test # We don't bother splitting the debug build out into further subpackages: # if you need it, you're probably a developer. # Hence the manifest is the combination of analogous files in the manifests of # all of the other subpackages %if %{with debug_build} %files -n %{pkgname}-debug %if %{with main_python} %{_bindir}/python3-debug %{_bindir}/python-debug %endif # Analog of the core subpackage's files: %{_bindir}/python%{LDVERSION_debug} # Analog of the -libs subpackage's files: # ...with debug builds of the built-in "extension" modules: %{dynload_dir}/_blake2.%{SOABI_debug}.so %{dynload_dir}/_md5.%{SOABI_debug}.so %{dynload_dir}/_sha1.%{SOABI_debug}.so %{dynload_dir}/_sha256.%{SOABI_debug}.so %{dynload_dir}/_sha3.%{SOABI_debug}.so %{dynload_dir}/_sha512.%{SOABI_debug}.so %{dynload_dir}/_asyncio.%{SOABI_debug}.so %{dynload_dir}/_bisect.%{SOABI_debug}.so %{dynload_dir}/_bz2.%{SOABI_debug}.so %{dynload_dir}/_codecs_cn.%{SOABI_debug}.so %{dynload_dir}/_codecs_hk.%{SOABI_debug}.so %{dynload_dir}/_codecs_iso2022.%{SOABI_debug}.so %{dynload_dir}/_codecs_jp.%{SOABI_debug}.so %{dynload_dir}/_codecs_kr.%{SOABI_debug}.so %{dynload_dir}/_codecs_tw.%{SOABI_debug}.so %{dynload_dir}/_contextvars.%{SOABI_debug}.so %{dynload_dir}/_crypt.%{SOABI_debug}.so %{dynload_dir}/_csv.%{SOABI_debug}.so %{dynload_dir}/_ctypes.%{SOABI_debug}.so %{dynload_dir}/_curses.%{SOABI_debug}.so %{dynload_dir}/_curses_panel.%{SOABI_debug}.so %{dynload_dir}/_dbm.%{SOABI_debug}.so %{dynload_dir}/_decimal.%{SOABI_debug}.so %{dynload_dir}/_elementtree.%{SOABI_debug}.so %if %{with gdbm} %{dynload_dir}/_gdbm.%{SOABI_debug}.so %endif %{dynload_dir}/_hashlib.%{SOABI_debug}.so %{dynload_dir}/_heapq.%{SOABI_debug}.so %{dynload_dir}/_json.%{SOABI_debug}.so %{dynload_dir}/_lsprof.%{SOABI_debug}.so %{dynload_dir}/_lzma.%{SOABI_debug}.so %{dynload_dir}/_multibytecodec.%{SOABI_debug}.so %{dynload_dir}/_multiprocessing.%{SOABI_debug}.so %{dynload_dir}/_opcode.%{SOABI_debug}.so %{dynload_dir}/_pickle.%{SOABI_debug}.so %{dynload_dir}/_posixsubprocess.%{SOABI_debug}.so %{dynload_dir}/_queue.%{SOABI_debug}.so %{dynload_dir}/_random.%{SOABI_debug}.so %{dynload_dir}/_socket.%{SOABI_debug}.so %{dynload_dir}/_sqlite3.%{SOABI_debug}.so %{dynload_dir}/_ssl.%{SOABI_debug}.so %{dynload_dir}/_statistics.%{SOABI_debug}.so %{dynload_dir}/_struct.%{SOABI_debug}.so %{dynload_dir}/array.%{SOABI_debug}.so %{dynload_dir}/audioop.%{SOABI_debug}.so %{dynload_dir}/binascii.%{SOABI_debug}.so %{dynload_dir}/cmath.%{SOABI_debug}.so %{dynload_dir}/_datetime.%{SOABI_debug}.so %{dynload_dir}/fcntl.%{SOABI_debug}.so %{dynload_dir}/grp.%{SOABI_debug}.so %{dynload_dir}/math.%{SOABI_debug}.so %{dynload_dir}/mmap.%{SOABI_debug}.so %{dynload_dir}/nis.%{SOABI_debug}.so %{dynload_dir}/ossaudiodev.%{SOABI_debug}.so %{dynload_dir}/_posixshmem.%{SOABI_debug}.so %{dynload_dir}/pyexpat.%{SOABI_debug}.so %{dynload_dir}/readline.%{SOABI_debug}.so %{dynload_dir}/resource.%{SOABI_debug}.so %{dynload_dir}/select.%{SOABI_debug}.so %{dynload_dir}/spwd.%{SOABI_debug}.so %{dynload_dir}/syslog.%{SOABI_debug}.so %{dynload_dir}/termios.%{SOABI_debug}.so %{dynload_dir}/unicodedata.%{SOABI_debug}.so %{dynload_dir}/_uuid.%{SOABI_debug}.so %{dynload_dir}/xxlimited.%{SOABI_debug}.so %{dynload_dir}/xxlimited_35.%{SOABI_debug}.so %{dynload_dir}/_xxsubinterpreters.%{SOABI_debug}.so %{dynload_dir}/_xxtestfuzz.%{SOABI_debug}.so %{dynload_dir}/zlib.%{SOABI_debug}.so %{dynload_dir}/_zoneinfo.%{SOABI_debug}.so # No need to split things out the "Makefile" and the config-32/64.h file as we # do for the regular build above (bug 531901), since they're all in one package # now; they're listed below, under "-devel": %{_libdir}/%{py_INSTSONAME_debug} # Analog of the -devel subpackage's files: %{pylibdir}/config-%{LDVERSION_debug}-%{platform_triplet} %{_includedir}/python%{LDVERSION_debug} %{_bindir}/python%{LDVERSION_debug}-config %{_bindir}/python%{LDVERSION_debug}-*-config %{_libdir}/libpython%{LDVERSION_debug}.so %{_libdir}/libpython%{LDVERSION_debug}.so.%{py_SOVERSION} %{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc %{_libdir}/pkgconfig/python-%{LDVERSION_debug}-embed.pc # Analog of the -tools subpackage's files: # None for now; we could build precanned versions that have the appropriate # shebang if needed # Analog of the tkinter subpackage's files: %{dynload_dir}/_tkinter.%{SOABI_debug}.so # Analog of the -test subpackage's files: %{dynload_dir}/_ctypes_test.%{SOABI_debug}.so %{dynload_dir}/_testbuffer.%{SOABI_debug}.so %{dynload_dir}/_testcapi.%{SOABI_debug}.so %{dynload_dir}/_testclinic.%{SOABI_debug}.so %{dynload_dir}/_testimportmultiple.%{SOABI_debug}.so %{dynload_dir}/_testinternalcapi.%{SOABI_debug}.so %{dynload_dir}/_testmultiphase.%{SOABI_debug}.so %{pylibdir}/_sysconfigdata_%{ABIFLAGS_debug}_linux_%{platform_triplet}.py %{pylibdir}/__pycache__/_sysconfigdata_%{ABIFLAGS_debug}_linux_%{platform_triplet}%{bytecode_suffixes} %endif # with debug_build # We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from ldconfig # See https://bugzilla.redhat.com/show_bug.cgi?id=562980 # # The /usr/lib/rpm/redhat/macros defines %%__debug_package to use # debugfiles.list, and it appears that everything below /usr/lib/debug and # (/usr/src/debug) gets added to this file (via LISTFILES) in # /usr/lib/rpm/find-debuginfo.sh # # Hence by installing it below /usr/lib/debug we ensure it is added to the # -debuginfo subpackage # (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py # payload file would be unpackaged) # Workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1476593 %undefine _debuginfo_subpackages # ====================================================== # Finally, the changelog: # ====================================================== %changelog * Mon Jun 17 2024 Christian Heimes - 3.10.14-2.2 - Lower minimal python-rpm-macros version for EL9 * Fri Jun 07 2024 Christian Heimes - 3.10.14-2.1 - Modify to build on EL9 * Wed Apr 17 2024 Miro Hrončok - 3.10.14-2 - Require expat >= 2.6 to prevent errors when creating venvs with older expat * Wed Mar 20 2024 Tomáš Hrnčiar - 3.10.14-1 - Update to 3.10.14 * Wed Feb 28 2024 Charalampos Stratakis - 3.10.13-6 - Fix tests for XMLPullParser with Expat 2.6.0 * Mon Jan 29 2024 Karolina Surma - 3.10.13-5 - Fix test_zlib when building with zlib-ng-compat * Fri Jan 26 2024 Fedora Release Engineering - 3.10.13-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild * Mon Jan 22 2024 Fedora Release Engineering - 3.10.13-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild * Mon Dec 18 2023 Lumír Balhar - 3.10.13-2 - Security fix for CVE-2023-27043 (rhbz#2196187) * Mon Aug 28 2023 Tomáš Hrnčiar - 3.10.13-1 - Update to 3.10.13 * Wed Aug 02 2023 Charalampos Stratakis - 3.10.12-3 - Remove extra distro-applied CFLAGS passed to user built C extensions - https://fedoraproject.org/wiki/Changes/Python_Extension_Flags_Reduction * Fri Jul 21 2023 Fedora Release Engineering - 3.10.12-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild * Thu Jun 08 2023 Tomáš Hrnčiar - 3.10.12-1 - Update to 3.10.12 * Mon May 29 2023 Charalampos Stratakis - 3.10.11-2 - Fix for CVE-2023-24329 Resolves: rhbz#2174010 * Wed Apr 05 2023 Tomáš Hrnčiar - 3.10.11-1 - Update to 3.10.11 * Wed Feb 08 2023 Tomáš Hrnčiar - 3.10.10-1 - Update to 3.10.10 * Fri Jan 20 2023 Fedora Release Engineering - 3.10.9-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Wed Dec 21 2022 Miro Hrončok - 3.10.9-3 - No longer patch the default bytecode cache invalidation policy * Tue Dec 20 2022 Miro Hrončok - 3.10.9-2 - Supplement tox from the devel package * Wed Dec 07 2022 Tomáš Hrnčiar - 3.10.9-1 - Update to 3.10.9 * Mon Nov 14 2022 Miro Hrončok - 3.10.8-3 - Make IDLE work without python3-test installed - Fixes rhbz#2142602 * Wed Nov 09 2022 Lumír Balhar - 3.10.8-2 - Fix CVE-2022-42919 Resolves: rhbz#2138709 * Wed Oct 12 2022 Miro Hrončok - 3.10.8-1 - Update to 3.10.8 * Wed Sep 07 2022 Miro Hrončok - 3.10.7-1 - Update to 3.10.7 - Contains security fix for CVE-2020-10735 * Mon Aug 22 2022 Miro Hrončok - 3.10.6-2 - Don't use custom installation schemes - Fixes rhbz#2026979 - Fixes rhbz#2097183 * Tue Aug 02 2022 Tomáš Hrnčiar - 3.10.6-1 - Update to 3.10.6 * Fri Jul 22 2022 Fedora Release Engineering - 3.10.5-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild * Mon Jun 13 2022 Tomáš Hrnčiar - 3.10.5-3 - Rebuilt for Python 3.11 * Thu Jun 09 2022 Charalampos Stratakis - 3.10.5-2 - Security fix for CVE-2015-20107 Resolves: rhbz#2075390 * Tue Jun 07 2022 Tomáš Hrnčiar - 3.10.5-1 - Update to 3.10.5 * Sat May 14 2022 Tomas Orsava - 3.10.4-2 - Move _sysconfigdata_d_linux*.py to the debug subpackage * Fri Mar 25 2022 Tomáš Hrnčiar - 3.10.4-1 - Update to 3.10.4 * Fri Mar 18 2022 Tomáš Hrnčiar - 3.10.3-1 - Update to 3.10.3 * Tue Feb 01 2022 Tomáš Hrnčiar - 3.10.2-3 - Backport AC_C_CHAR_UNSIGNED/__CHAR_UNSIGNED__ removal - Fixes: rhbz#2043555 * Fri Jan 21 2022 Fedora Release Engineering - 3.10.2-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Jan 17 2022 Tomáš Hrnčiar - 3.10.2-1 - Update to 3.10.2 * Mon Jan 10 2022 Miro Hrončok - 3.10.1-3 - Backport fixes for two Python 3.10.1 regressions - Fixes: rhbz#2030621 - Fixes: rhbz#2034962 * Sat Jan 08 2022 Miro Hrončok - 3.10.1-2 - Rebuilt for https://fedoraproject.org/wiki/Changes/LIBFFI34 * Tue Dec 07 2021 Tomáš Hrnčiar - 3.10.1-1 - Update to 3.10.1 * Fri Nov 12 2021 Björn Esser - 3.10.0-4 - Rebuild(libnsl2) * Tue Nov 09 2021 Lumír Balhar - 3.10.0-3 - Update patch 251 to include specific install scheme for virtualenv * Tue Oct 05 2021 Miro Hrončok - 3.10.0-2 - Change the values of sysconfig's "posix_prefix" install scheme to /usr/local when RPM build or venv/virtualenv is not detected, instead of patching distutils * Mon Oct 04 2021 Miro Hrončok - 3.10.0-1 - Update to 3.10.0 final * Tue Sep 14 2021 Sahana Prasad - 3.10.0~rc2-2 - Rebuilt with OpenSSL 3.0.0 * Wed Sep 08 2021 Tomas Hrnciar - 3.10.0~rc2-1 - Update to 3.10.0rc2 * Tue Aug 03 2021 Tomas Hrnciar - 3.10.0~rc1-1 - Update to 3.10.0rc1 * Fri Jul 23 2021 Fedora Release Engineering - 3.10.0~b4-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Fri Jul 16 2021 Petr Viktorin - 3.10.0~b4-2 - Provide python3-turtle from python3-tkinter - Require pyproject-rpm-macros from python3-devel * Sun Jul 11 2021 Miro Hrončok - 3.10.0~b4-1 - Update to 3.10.0b4 * Thu Jun 17 2021 Miro Hrončok - 3.10.0~b3-1 - Update to 3.10.0b3 * Tue Jun 01 2021 Python Maint - 3.10.0~b2-3 - Rebuilt for Python 3.10 * Tue Jun 01 2021 Python Maint - 3.10.0~b2-2 - Bootstrap for Python 3.10 * Tue Jun 01 2021 Tomas Hrnciar - 3.10.0~b2-1 - Update to 3.10.0b2 * Fri May 14 2021 Charalampos Stratakis - 3.10.0~b1-2 - Use the system installed mpdecimal instead of the bundled copy (#1943359) * Tue May 04 2021 Tomas Hrnciar - 3.10.0~b1-1 - Update to 3.10.0b1 * Tue Apr 06 2021 Tomas Hrnciar - 3.10.0~a7-1 - Update to 3.10.0a7 * Mon Mar 22 2021 Miro Hrončok - 3.10.0~a6-2 - When flat, don't require/provide python(abi) = 3.10 * Tue Mar 02 2021 Tomas Hrnciar - 3.10.0~a6-1 - Update to 3.10.0a6 * Wed Feb 3 15:01:21 CET 2021 Tomas Hrnciar - 3.10.0~a5-1 - Update to 3.10.0a5 * Wed Jan 27 2021 Fedora Release Engineering - 3.10.0~a4-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Fri Jan 15 2021 Charalampos Stratakis - 3.10.0~a4-2 - Compile the debug build with -O0 instead of -Og (rhbz#1818857) * Mon Jan 04 2021 Miro Hrončok - 3.10.0~a4-1 - Update to 3.10.0a4 * Tue Dec 08 2020 Tomas Hrnciar - 3.10.0~a3-1 - Update to 3.10.0a3 * Wed Nov 04 2020 Miro Hrončok - 3.10.0~a2-1 - Update to 3.10.0a2 * Mon Oct 12 2020 Miro Hrončok - 3.10.0~a1-2 - Finish initial bootstrap, build Python 3.10 with Python 3.10 * Fri Oct 09 2020 Miro Hrončok - 3.10.0~a1-1 - Initial Python 3.10 package forked from Python 3.9