%global _default_patch_fuzz 2 %global debug_package %{nil} %global dkms_source_dir %{_usrsrc}/%{name}-%{version} # Nobara's fork: xone_mtnet runs the new dongle on MediaTek's firmware, with wake on wireless %global commit ea58108d597fd0715796a8bd9eed960b28afefde Name: xone # A new version (not just a release) for every source change: DKMS keys builds on # the version, so the same version over different source is never rebuilt Version: 0.5.8.3 Release: 1%{?dist} Summary: Linux kernel driver for Xbox One and Xbox Series X|S accessories License: GPLv2 URL: https://github.com/GloriousEggroll/xone Source0: %{url}/archive/%{commit}/%{name}-%{commit}.tar.gz # NOTE: xone_gip_headset is intentionally left out of early module loading because it tries to load snd before snd is available # It should still load automatically when you plug in the device. Source1: modules-load-d-%{name}.conf Patch1: 0002-fix-wired-usb-reset-race-condition.patch BuildRequires: systemd-rpm-macros BuildRequires: sed BuildArch: noarch Requires: dkms Requires: bash # Microsoft's firmware is still needed for the old (045e:02e6) and built-in dongles Requires: lpf-xone-firmware Requires: gcc, make, kernel-devel Requires: xpad-noone # xone-mtnet-setup puts the new dongle's interface into monitor mode with iw Requires: iw Conflicts: xow <= 0.5 Obsoletes: xow <= 0.5 Provides: %{name}-kmod-common = %{version}-%{release} Obsoletes: akmod-xone < %{version}-%{release} %description xone is a Linux kernel driver for Xbox One and Xbox Series X|S dongle. %prep %autosetup -p1 -n %{name}-%{commit} # Fill the version into dkms.conf and the modules (as upstream's install.sh does): # with MODULE_VERSION left at "#VERSION#", DKMS sees every build as the same # version and won't replace installed modules on upgrade find . -type f \( -name dkms.conf -o -name '*.c' \) -exec sed -i 's/#VERSION#/%{version}/' {} + %build %install mkdir -p %{buildroot}%{dkms_source_dir} cp -fr . %{buildroot}%{dkms_source_dir} install -D -m 0644 install/modprobe.conf %{buildroot}%{_modprobedir}/60-%{name}.conf install -D -m 0644 %{SOURCE1} %{buildroot}%{_modulesloaddir}/%{name}.conf # The new dongle (045e:02fe) runs on mt76x2u + xone_mtnet: this udev rule puts # its interface into monitor mode so xone_mtnet attaches. install -D -m 0644 install/mtnet/70-xone-mtnet.rules %{buildroot}%{_udevrulesdir}/70-xone-mtnet.rules install -D -m 0755 install/mtnet/xone-mtnet-setup %{buildroot}%{_libexecdir}/xone-mtnet-setup %post %udev_rules_update # xone's own install.sh writes /etc/modprobe.d/xone-blacklist.conf, and older # versions of it blacklisted mt76x2u there. /etc overrides this package's # /usr/lib/modprobe.d/60-xone.conf, so that line keeps the new dongle (045e:02fe) # from binding any driver. Drop it, and drop the file if all that's left is the # xpad blacklist that 60-xone.conf already has; anything else the user added stays. f=/etc/modprobe.d/xone-blacklist.conf if [ -f "$f" ] && grep -qE '^[[:space:]]*blacklist[[:space:]]+mt76x2u[[:space:]]*$' "$f"; then sed -i -E '/^[[:space:]]*blacklist[[:space:]]+mt76x2u[[:space:]]*$/d' "$f" if ! grep -vE '^[[:space:]]*(#.*)?$|^[[:space:]]*blacklist[[:space:]]+xpad[[:space:]]*$' "$f" | grep -q .; then rm -f "$f" fi fi # Builds before 0.5.8.1 left MODULE_VERSION as "#VERSION#", which DKMS ranks above # any real version, so it would never replace them. Remove those xone modules from # every kernel first; DKMS then installs this version for each kernel as usual. for k in /lib/modules/*; do stale= for m in "$k"/extra/xone_*.ko*; do [ -e "$m" ] || continue if [ "$(modinfo -F version "$m" 2>/dev/null)" = "#VERSION#" ]; then rm -f "$m"; stale=1 fi done [ -n "$stale" ] && depmod -a "${k##*/}" 2>/dev/null || : done dkms add -m %{name} -v %{version} --rpm_safe_upgrade || : dkms build -m %{name} -v %{version} || : dkms install -m %{name} -v %{version} --force || : %preun dkms remove -m %{name} -v %{version} --all --rpm_safe_upgrade || : %files %license LICENSE %doc README.md %{_usrsrc}/%{name}-%{version} %{_modprobedir}/60-%{name}.conf %{_modulesloaddir}/%{name}.conf %{_udevrulesdir}/70-xone-mtnet.rules %{_libexecdir}/xone-mtnet-setup %changelog * Wed Nov 11 2026 GloriousEggroll - 0.5.8.3-1 - xone_mtnet: turn connected controllers off before the system sleeps; one left on kept transmitting and woke the system straight back up - xone_mtnet: turn controllers off after 15 minutes without input; stick drift and report timestamps don't count. Live toggle: the idle_poweroff module parameter (Y/N), with idle_timeout for the minutes * Wed Nov 11 2026 GloriousEggroll - 0.5.8.2-2 - Remove "blacklist mt76x2u" from /etc/modprobe.d/xone-blacklist.conf (left by xone's install.sh), which overrode 60-xone.conf and left the new dongle (045e:02fe) with no driver; remove the file if nothing else is left in it (rpm-sources#659) * Wed Nov 11 2026 GloriousEggroll - 0.5.8.2-1 - xone_mtnet: stop enabling wakeup on the USB root hub. It armed wake on connect/disconnect for every port on the bus, so another device there (a Framework laptop webcam that drops off as the system suspends) woke the system at once, controller on or off. The dongle and any external hubs above it still get wakeup, which is all the controller wake needs * Tue Nov 10 2026 GloriousEggroll - 0.5.8.1-1 - Bump the version so DKMS rebuilds: 0.5.8-4 kept DKMS version 0.5.8, so upgrades reported the old build as installed and never built the new source (dkms status: "Built modules are missing" for xone_mtnet) - Fill in MODULE_VERSION (was left as "#VERSION#"). DKMS ranks "#VERSION#" above real versions, so %post removes the old xone modules carrying it and installs with --force; otherwise upgrades kept the old modules * Tue Nov 10 2026 GloriousEggroll - 0.5.8-4 - Build from the GloriousEggroll/xone fork - Run the new dongle (045e:02fe) on mt76x2u and xone_mtnet with MediaTek's firmware instead of xone_dongle and Microsoft's firmware; the old and built-in dongles stay on xone_dongle - Add wake on wireless to xone_mtnet: a controller turning on wakes the host from s2idle or S3; the system's sleep mode is left as it is * Tue Feb 10 2026 LionHeartP - 0.5.8-3 - Add xpad-noone as a dependency * Tue Feb 10 2026 LionHeartP - 0.5.5-1 - Update to 0.5.5 - Convert to dkms * Wed Dec 17 2025 LionHeartP - 0.5.0-1 - Update to 0.5.0 * Sat Nov 15 2025 LionHeartP - 0.4.11-1 - Update to 0.4.11 * Thu Oct 16 2025 LionHeartP - 0.4.8-1 - Update to 0.4.8 * Sat Aug 23 2025 LionHeartP - 0.4.3-1 - Update to 0.4.3 - Rebase 0001-convert-to-dongle-only-build.patch - Remove elite-paddles.patch (upstreamed) * Sun Jan 28 2024 Jan Drögehoff - 0.3-4 - Force bump release * Tue Jun 06 2023 Jan Drögehoff - 0.3-3 - Fix Linux 6.3 compilation, add some patches * Sun Nov 13 2022 Jan Drögehoff - 0.3-2 - correct modules * Thu Jun 23 2022 Jan Drögehoff - 0.3-1 - Update to 0.3 * Sat Mar 19 2022 Jan Drögehoff - 0.2-2 - Obsolete xow and require firmware * Sun Feb 27 2022 Jan Drögehoff - 0.2-1 - Update to 0.2 * Fri Jul 02 2021 Jan Drögehoff - 0.1-1 - Initial spec