Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c1d8' (ED25519) to the list of known hosts. cwd: /var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py rc: 0 stdout: stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD INFO: Reading stdout from command: git rev-parse HEAD INFO: Reading sources specification file: sources INFO: Downloading pc-ble-driver-py-0.17.0.tar.gz INFO: Reading stdout from command: curl --help all INFO: Calling: curl -H Pragma: -o pc-ble-driver-py-0.17.0.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/pbrobinson/openthread/pc-ble-driver-py/pc-ble-driver-py-0.17.0.tar.gz/md5/914d078347d536e5d26ff8c86975f214/pc-ble-driver-py-0.17.0.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 57324 100 57324 0 0 1091k 0 --:--:-- --:--:-- --:--:-- 1097k INFO: Reading stdout from command: md5sum pc-ble-driver-py-0.17.0.tar.gz Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py/pc-ble-driver-py.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1731315110.058861 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 5.9 starting (python version = 3.12.1, NVR = mock-5.9-1.fc39), args: /usr/libexec/mock/mock --spec /var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py/pc-ble-driver-py.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1731315110.058861 -r /var/lib/copr-rpmbuild/results/configs/child.cfg Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py/pc-ble-driver-py.spec) Config(fedora-40-x86_64) Start: clean chroot Finish: clean chroot Mock Version: 5.9 INFO: Mock Version: 5.9 Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1731315110.058861/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: Package manager dnf5 detected and used (fallback) Start(bootstrap): installing dnf5 tooling Updating and loading repositories: fedora 100% | 11.4 MiB/s | 20.8 MiB | 00m02s updates 100% | 9.4 MiB/s | 11.7 MiB | 00m01s Copr repository 100% | 30.8 KiB/s | 2.7 KiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing: dnf5 x86_64 5.1.17-2.fc40 updates 1.7 MiB dnf5-plugins x86_64 5.1.17-2.fc40 updates 1.1 MiB Installing dependencies: alternatives x86_64 1.27-1.fc40 updates 66.3 KiB audit-libs x86_64 4.0.2-1.fc40 updates 327.4 KiB basesystem noarch 11-20.fc40 fedora 0.0 B bash x86_64 5.2.26-3.fc40 fedora 8.1 MiB bzip2-libs x86_64 1.0.8-18.fc40 fedora 80.7 KiB ca-certificates noarch 2024.2.69_v8.0.401-1.0.fc40 updates 2.4 MiB coreutils x86_64 9.4-8.fc40 updates 5.8 MiB coreutils-common x86_64 9.4-8.fc40 updates 11.4 MiB crypto-policies noarch 20241011-1.git5930b9a.fc40 updates 158.0 KiB curl x86_64 8.6.0-10.fc40 updates 738.6 KiB cyrus-sasl-lib x86_64 2.1.28-19.fc40 fedora 2.3 MiB dnf-data noarch 4.21.1-1.fc40 updates 38.4 KiB elfutils-default-yama-scope noarch 0.192-4.fc40 updates 1.8 KiB elfutils-libelf x86_64 0.192-4.fc40 updates 1.2 MiB elfutils-libs x86_64 0.192-4.fc40 updates 670.3 KiB fedora-gpg-keys noarch 40-2 updates 124.7 KiB fedora-release noarch 40-39 updates 0.0 B fedora-release-common noarch 40-39 updates 19.1 KiB fedora-release-identity-basic noarch 40-39 updates 654.0 B fedora-repos noarch 40-2 updates 4.9 KiB file-libs x86_64 5.45-4.fc40 fedora 9.9 MiB filesystem x86_64 3.18-8.fc40 fedora 106.0 B findutils x86_64 1:4.9.0-9.fc40 updates 1.5 MiB fmt x86_64 10.2.1-5.fc40 updates 371.4 KiB gawk x86_64 5.3.0-3.fc40 fedora 1.7 MiB gdbm-libs x86_64 1:1.23-6.fc40 fedora 121.9 KiB glib2 x86_64 2.80.3-1.fc40 updates 14.6 MiB glibc x86_64 2.39-22.fc40 updates 6.6 MiB glibc-common x86_64 2.39-22.fc40 updates 1.0 MiB glibc-minimal-langpack x86_64 2.39-22.fc40 updates 0.0 B gmp x86_64 1:6.2.1-8.fc40 fedora 794.6 KiB gnutls x86_64 3.8.6-1.fc40 updates 3.2 MiB grep x86_64 3.11-7.fc40 fedora 1.0 MiB json-c x86_64 0.17-3.fc40 fedora 82.4 KiB keyutils-libs x86_64 1.6.3-3.fc40 fedora 54.4 KiB krb5-libs x86_64 1.21.3-1.fc40 updates 2.3 MiB libacl x86_64 2.3.2-1.fc40 fedora 40.0 KiB libarchive x86_64 3.7.2-7.fc40 updates 922.6 KiB libattr x86_64 2.5.2-3.fc40 fedora 28.5 KiB libblkid x86_64 2.40.2-1.fc40 updates 258.6 KiB libbrotli x86_64 1.1.0-3.fc40 fedora 829.5 KiB libcap x86_64 2.69-8.fc40 updates 219.8 KiB libcap-ng x86_64 0.8.4-4.fc40 fedora 73.1 KiB libcom_err x86_64 1.47.0-5.fc40 fedora 67.2 KiB libcurl x86_64 8.6.0-10.fc40 updates 776.8 KiB libdnf5 x86_64 5.1.17-2.fc40 updates 2.9 MiB libdnf5-cli x86_64 5.1.17-2.fc40 updates 559.1 KiB libeconf x86_64 0.6.2-2.fc40 updates 58.0 KiB libevent x86_64 2.1.12-12.fc40 fedora 895.6 KiB libffi x86_64 3.4.4-7.fc40 fedora 81.6 KiB libgcc x86_64 14.2.1-3.fc40 updates 274.6 KiB libgomp x86_64 14.2.1-3.fc40 updates 523.6 KiB libidn2 x86_64 2.3.7-1.fc40 fedora 329.1 KiB libmodulemd x86_64 2.15.0-12.fc40 updates 717.2 KiB libmount x86_64 2.40.2-1.fc40 updates 355.8 KiB libnghttp2 x86_64 1.59.0-3.fc40 updates 166.1 KiB libpsl x86_64 0.21.5-3.fc40 fedora 80.5 KiB librepo x86_64 1.18.1-1.fc40 updates 244.5 KiB libselinux x86_64 3.7-5.fc40 updates 177.0 KiB libsepol x86_64 3.7-2.fc40 updates 817.9 KiB libsmartcols x86_64 2.40.2-1.fc40 updates 180.4 KiB libsolv x86_64 0.7.30-1.fc40 updates 940.3 KiB libssh x86_64 0.10.6-5.fc40 fedora 509.3 KiB libssh-config noarch 0.10.6-5.fc40 fedora 277.0 B libstdc++ x86_64 14.2.1-3.fc40 updates 2.8 MiB libtasn1 x86_64 4.19.0-6.fc40 fedora 175.7 KiB libtool-ltdl x86_64 2.4.7-10.fc40 fedora 66.2 KiB libunistring x86_64 1.1-7.fc40 fedora 1.7 MiB libuuid x86_64 2.40.2-1.fc40 updates 37.5 KiB libverto x86_64 0.3.2-8.fc40 fedora 29.5 KiB libxcrypt x86_64 4.4.36-10.fc40 updates 267.5 KiB libxml2 x86_64 2.12.8-1.fc40 updates 1.7 MiB libyaml x86_64 0.2.5-14.fc40 fedora 130.4 KiB libzstd x86_64 1.5.6-1.fc40 updates 787.9 KiB lua-libs x86_64 5.4.6-5.fc40 fedora 281.1 KiB lz4-libs x86_64 1.9.4-6.fc40 fedora 129.4 KiB mpfr x86_64 4.2.1-4.fc40 updates 832.0 KiB ncurses-base noarch 6.4-12.20240127.fc40 fedora 326.2 KiB ncurses-libs x86_64 6.4-12.20240127.fc40 fedora 963.2 KiB nettle x86_64 3.9.1-6.fc40 fedora 790.1 KiB openldap x86_64 2.6.7-1.fc40 fedora 635.1 KiB openssl-libs x86_64 1:3.2.2-3.fc40 updates 7.8 MiB p11-kit x86_64 0.25.5-1.fc40 updates 2.2 MiB p11-kit-trust x86_64 0.25.5-1.fc40 updates 391.4 KiB pam-libs x86_64 1.6.1-3.fc40 updates 135.0 KiB pcre2 x86_64 10.44-1.fc40 updates 653.5 KiB pcre2-syntax noarch 10.44-1.fc40 updates 251.6 KiB popt x86_64 1.19-6.fc40 fedora 136.9 KiB publicsuffix-list-dafsa noarch 20240107-3.fc40 fedora 67.5 KiB readline x86_64 8.2-8.fc40 fedora 489.2 KiB rpm x86_64 4.19.1.1-1.fc40 fedora 3.0 MiB rpm-build-libs x86_64 4.19.1.1-1.fc40 fedora 198.4 KiB rpm-libs x86_64 4.19.1.1-1.fc40 fedora 709.9 KiB rpm-sequoia x86_64 1.7.0-1.fc40 updates 2.4 MiB sdbus-cpp x86_64 1.4.0-2.fc40 fedora 308.0 KiB sed x86_64 4.9-1.fc40 fedora 861.5 KiB setup noarch 2.14.5-2.fc40 fedora 720.4 KiB sqlite-libs x86_64 3.45.1-2.fc40 fedora 1.4 MiB systemd-libs x86_64 255.13-1.fc40 updates 1.9 MiB xz-libs x86_64 1:5.4.6-3.fc40 fedora 209.8 KiB zchunk-libs x86_64 1.5.1-1.fc40 updates 101.1 KiB zlib-ng-compat x86_64 2.1.7-2.fc40 updates 134.0 KiB Transaction Summary: Installing: 104 packages Total size of inbound packages is 38 MiB. Need to download 38 MiB. After this operation 128 MiB will be used (install 128 MiB, remove 0 B). [ 1/104] dnf5-plugins-0:5.1.17-2.fc40. 100% | 1.7 MiB/s | 357.8 KiB | 00m00s [ 2/104] dnf5-0:5.1.17-2.fc40.x86_64 100% | 3.1 MiB/s | 699.7 KiB | 00m00s [ 3/104] libdnf5-0:5.1.17-2.fc40.x86_6 100% | 18.4 MiB/s | 999.0 KiB | 00m00s [ 4/104] libdnf5-cli-0:5.1.17-2.fc40.x 100% | 9.0 MiB/s | 231.3 KiB | 00m00s [ 5/104] rpm-libs-0:4.19.1.1-1.fc40.x8 100% | 922.2 KiB/s | 308.9 KiB | 00m00s [ 6/104] rpm-build-libs-0:4.19.1.1-1.f 100% | 1.8 MiB/s | 95.0 KiB | 00m00s [ 7/104] bzip2-libs-0:1.0.8-18.fc40.x8 100% | 888.2 KiB/s | 40.9 KiB | 00m00s [ 8/104] sdbus-cpp-0:1.4.0-2.fc40.x86_ 100% | 420.0 KiB/s | 110.0 KiB | 00m00s [ 9/104] libacl-0:2.3.2-1.fc40.x86_64 100% | 555.2 KiB/s | 24.4 KiB | 00m00s [ 10/104] json-c-0:0.17-3.fc40.x86_64 100% | 219.0 KiB/s | 44.0 KiB | 00m00s [ 11/104] popt-0:1.19-6.fc40.x86_64 100% | 1.4 MiB/s | 66.7 KiB | 00m00s [ 12/104] lua-libs-0:5.4.6-5.fc40.x86_6 100% | 1.5 MiB/s | 131.9 KiB | 00m00s [ 13/104] xz-libs-1:5.4.6-3.fc40.x86_64 100% | 2.0 MiB/s | 110.0 KiB | 00m00s [ 14/104] sqlite-libs-0:3.45.1-2.fc40.x 100% | 6.2 MiB/s | 705.1 KiB | 00m00s [ 15/104] libattr-0:2.5.2-3.fc40.x86_64 100% | 418.6 KiB/s | 18.0 KiB | 00m00s [ 16/104] rpm-0:4.19.1.1-1.fc40.x86_64 100% | 2.6 MiB/s | 540.1 KiB | 00m00s [ 17/104] file-libs-0:5.45-4.fc40.x86_6 100% | 5.8 MiB/s | 762.7 KiB | 00m00s [ 18/104] sed-0:4.9-1.fc40.x86_64 100% | 5.3 MiB/s | 318.2 KiB | 00m00s [ 19/104] bash-0:5.2.26-3.fc40.x86_64 100% | 15.6 MiB/s | 1.8 MiB | 00m00s [ 20/104] ncurses-libs-0:6.4-12.2024012 100% | 5.4 MiB/s | 332.5 KiB | 00m00s [ 21/104] filesystem-0:3.18-8.fc40.x86_ 100% | 11.9 MiB/s | 1.1 MiB | 00m00s [ 22/104] setup-0:2.14.5-2.fc40.noarch 100% | 3.4 MiB/s | 154.7 KiB | 00m00s [ 23/104] fmt-0:10.2.1-5.fc40.x86_64 100% | 4.5 MiB/s | 124.7 KiB | 00m00s [ 24/104] ncurses-base-0:6.4-12.2024012 100% | 2.0 MiB/s | 88.8 KiB | 00m00s [ 25/104] glibc-common-0:2.39-22.fc40.x 100% | 14.1 MiB/s | 390.4 KiB | 00m00s [ 26/104] basesystem-0:11-20.fc40.noarc 100% | 167.2 KiB/s | 7.2 KiB | 00m00s [ 27/104] libgcc-0:14.2.1-3.fc40.x86_64 100% | 5.2 MiB/s | 133.3 KiB | 00m00s [ 28/104] glibc-0:2.39-22.fc40.x86_64 100% | 22.8 MiB/s | 2.2 MiB | 00m00s [ 29/104] libstdc++-0:14.2.1-3.fc40.x86 100% | 26.2 MiB/s | 886.5 KiB | 00m00s [ 30/104] glib2-0:2.80.3-1.fc40.x86_64 100% | 57.0 MiB/s | 3.0 MiB | 00m00s [ 31/104] libffi-0:3.4.4-7.fc40.x86_64 100% | 915.5 KiB/s | 39.4 KiB | 00m00s [ 32/104] libmodulemd-0:2.15.0-12.fc40. 100% | 9.1 MiB/s | 232.3 KiB | 00m00s [ 33/104] libsmartcols-0:2.40.2-1.fc40. 100% | 612.1 KiB/s | 83.2 KiB | 00m00s [ 34/104] librepo-0:1.18.1-1.fc40.x86_6 100% | 4.0 MiB/s | 99.4 KiB | 00m00s [ 35/104] libyaml-0:0.2.5-14.fc40.x86_6 100% | 1.2 MiB/s | 59.2 KiB | 00m00s [ 36/104] libsolv-0:0.7.30-1.fc40.x86_6 100% | 15.5 MiB/s | 428.9 KiB | 00m00s [ 37/104] libxml2-0:2.12.8-1.fc40.x86_6 100% | 21.6 MiB/s | 687.1 KiB | 00m00s [ 38/104] gmp-1:6.2.1-8.fc40.x86_64 100% | 6.1 MiB/s | 312.5 KiB | 00m00s [ 39/104] libidn2-0:2.3.7-1.fc40.x86_64 100% | 2.6 MiB/s | 118.7 KiB | 00m00s [ 40/104] libtasn1-0:4.19.0-6.fc40.x86_ 100% | 1.6 MiB/s | 73.7 KiB | 00m00s [ 41/104] gnutls-0:3.8.6-1.fc40.x86_64 100% | 9.4 MiB/s | 1.1 MiB | 00m00s [ 42/104] libunistring-0:1.1-7.fc40.x86 100% | 10.4 MiB/s | 545.5 KiB | 00m00s [ 43/104] libmount-0:2.40.2-1.fc40.x86_ 100% | 6.1 MiB/s | 155.2 KiB | 00m00s [ 44/104] libblkid-0:2.40.2-1.fc40.x86_ 100% | 5.1 MiB/s | 124.1 KiB | 00m00s [ 45/104] nettle-0:3.9.1-6.fc40.x86_64 100% | 8.5 MiB/s | 424.9 KiB | 00m00s [ 46/104] libuuid-0:2.40.2-1.fc40.x86_6 100% | 1.2 MiB/s | 28.6 KiB | 00m00s [ 47/104] libselinux-0:3.7-5.fc40.x86_6 100% | 3.6 MiB/s | 88.0 KiB | 00m00s [ 48/104] libsepol-0:3.7-2.fc40.x86_64 100% | 12.4 MiB/s | 342.2 KiB | 00m00s [ 49/104] pcre2-0:10.44-1.fc40.x86_64 100% | 8.8 MiB/s | 242.9 KiB | 00m00s [ 50/104] pcre2-syntax-0:10.44-1.fc40.n 100% | 6.1 MiB/s | 149.8 KiB | 00m00s [ 51/104] zlib-ng-compat-0:2.1.7-2.fc40 100% | 3.3 MiB/s | 77.7 KiB | 00m00s [ 52/104] dnf-data-0:4.21.1-1.fc40.noar 100% | 1.7 MiB/s | 39.2 KiB | 00m00s [ 53/104] systemd-libs-0:255.13-1.fc40. 100% | 23.0 MiB/s | 707.3 KiB | 00m00s [ 54/104] libcap-0:2.69-8.fc40.x86_64 100% | 3.5 MiB/s | 85.7 KiB | 00m00s [ 55/104] libzstd-0:1.5.6-1.fc40.x86_64 100% | 11.6 MiB/s | 309.2 KiB | 00m00s [ 56/104] lz4-libs-0:1.9.4-6.fc40.x86_6 100% | 1.5 MiB/s | 67.2 KiB | 00m00s [ 57/104] rpm-sequoia-0:1.7.0-1.fc40.x8 100% | 26.4 MiB/s | 892.8 KiB | 00m00s [ 58/104] elfutils-libelf-0:0.192-4.fc4 100% | 7.8 MiB/s | 208.4 KiB | 00m00s [ 59/104] elfutils-libs-0:0.192-4.fc40. 100% | 9.5 MiB/s | 263.4 KiB | 00m00s [ 60/104] libgomp-0:14.2.1-3.fc40.x86_6 100% | 12.8 MiB/s | 353.9 KiB | 00m00s [ 61/104] curl-0:8.6.0-10.fc40.x86_64 100% | 11.2 MiB/s | 299.2 KiB | 00m00s [ 62/104] findutils-1:4.9.0-9.fc40.x86_ 100% | 13.7 MiB/s | 491.4 KiB | 00m00s [ 63/104] libarchive-0:3.7.2-7.fc40.x86 100% | 13.8 MiB/s | 408.5 KiB | 00m00s [ 64/104] ca-certificates-0:2024.2.69_v 100% | 22.4 MiB/s | 871.2 KiB | 00m00s [ 65/104] grep-0:3.11-7.fc40.x86_64 100% | 6.1 MiB/s | 300.2 KiB | 00m00s [ 66/104] crypto-policies-0:20241011-1. 100% | 4.0 MiB/s | 98.9 KiB | 00m00s [ 67/104] openssl-libs-1:3.2.2-3.fc40.x 100% | 25.9 MiB/s | 2.3 MiB | 00m00s [ 68/104] zchunk-libs-0:1.5.1-1.fc40.x8 100% | 2.2 MiB/s | 52.1 KiB | 00m00s [ 69/104] pam-libs-0:1.6.1-3.fc40.x86_6 100% | 2.3 MiB/s | 57.1 KiB | 00m00s [ 70/104] p11-kit-0:0.25.5-1.fc40.x86_6 100% | 17.1 MiB/s | 491.2 KiB | 00m00s [ 71/104] elfutils-default-yama-scope-0 100% | 537.0 KiB/s | 12.4 KiB | 00m00s [ 72/104] p11-kit-trust-0:0.25.5-1.fc40 100% | 5.4 MiB/s | 132.0 KiB | 00m00s [ 73/104] audit-libs-0:4.0.2-1.fc40.x86 100% | 5.1 MiB/s | 125.8 KiB | 00m00s [ 74/104] libeconf-0:0.6.2-2.fc40.x86_6 100% | 1.4 MiB/s | 32.0 KiB | 00m00s [ 75/104] alternatives-0:1.27-1.fc40.x8 100% | 1.7 MiB/s | 40.7 KiB | 00m00s [ 76/104] libcap-ng-0:0.8.4-4.fc40.x86_ 100% | 759.2 KiB/s | 32.6 KiB | 00m00s [ 77/104] glibc-minimal-langpack-0:2.39 100% | 4.3 MiB/s | 106.3 KiB | 00m00s [ 78/104] libcurl-0:8.6.0-10.fc40.x86_6 100% | 12.9 MiB/s | 344.8 KiB | 00m00s [ 79/104] libbrotli-0:1.1.0-3.fc40.x86_ 100% | 6.9 MiB/s | 338.4 KiB | 00m00s [ 80/104] libpsl-0:0.21.5-3.fc40.x86_64 100% | 1.4 MiB/s | 63.9 KiB | 00m00s [ 81/104] libssh-0:0.10.6-5.fc40.x86_64 100% | 3.8 MiB/s | 210.6 KiB | 00m00s [ 82/104] publicsuffix-list-dafsa-0:202 100% | 1.2 MiB/s | 58.1 KiB | 00m00s [ 83/104] openldap-0:2.6.7-1.fc40.x86_6 100% | 5.3 MiB/s | 254.3 KiB | 00m00s [ 84/104] libssh-config-0:0.10.6-5.fc40 100% | 210.0 KiB/s | 9.0 KiB | 00m00s [ 85/104] libevent-0:2.1.12-12.fc40.x86 100% | 4.9 MiB/s | 257.2 KiB | 00m00s [ 86/104] cyrus-sasl-lib-0:2.1.28-19.fc 100% | 14.0 MiB/s | 789.3 KiB | 00m00s [ 87/104] libtool-ltdl-0:2.4.7-10.fc40. 100% | 803.5 KiB/s | 36.2 KiB | 00m00s [ 88/104] coreutils-0:9.4-8.fc40.x86_64 100% | 30.9 MiB/s | 1.1 MiB | 00m00s [ 89/104] gdbm-libs-1:1.23-6.fc40.x86_6 100% | 1.3 MiB/s | 56.2 KiB | 00m00s [ 90/104] fedora-release-0:40-39.noarch 100% | 469.8 KiB/s | 10.8 KiB | 00m00s [ 91/104] fedora-release-common-0:40-39 100% | 925.7 KiB/s | 21.3 KiB | 00m00s [ 92/104] krb5-libs-0:1.21.3-1.fc40.x86 100% | 23.8 MiB/s | 757.0 KiB | 00m00s [ 93/104] coreutils-common-0:9.4-8.fc40 100% | 23.9 MiB/s | 2.1 MiB | 00m00s [ 94/104] keyutils-libs-0:1.6.3-3.fc40. 100% | 715.2 KiB/s | 31.5 KiB | 00m00s [ 95/104] libxcrypt-0:4.4.36-10.fc40.x8 100% | 4.8 MiB/s | 119.0 KiB | 00m00s [ 96/104] libcom_err-0:1.47.0-5.fc40.x8 100% | 589.6 KiB/s | 25.4 KiB | 00m00s [ 97/104] libverto-0:0.3.2-8.fc40.x86_6 100% | 477.7 KiB/s | 20.5 KiB | 00m00s [ 98/104] libnghttp2-0:1.59.0-3.fc40.x8 100% | 3.2 MiB/s | 75.3 KiB | 00m00s [ 99/104] fedora-repos-0:40-2.noarch 100% | 412.4 KiB/s | 9.5 KiB | 00m00s [100/104] gawk-0:5.3.0-3.fc40.x86_64 100% | 17.6 MiB/s | 1.1 MiB | 00m00s [101/104] readline-0:8.2-8.fc40.x86_64 100% | 4.5 MiB/s | 213.3 KiB | 00m00s [102/104] fedora-gpg-keys-0:40-2.noarch 100% | 5.4 MiB/s | 132.1 KiB | 00m00s [103/104] fedora-release-identity-basic 100% | 503.9 KiB/s | 11.6 KiB | 00m00s [104/104] mpfr-0:4.2.1-4.fc40.x86_64 100% | 12.2 MiB/s | 348.9 KiB | 00m00s -------------------------------------------------------------------------------- [104/104] Total 100% | 19.3 MiB/s | 38.0 MiB | 00m02s Running transaction Importing PGP key 0xA15B79CC: Userid : "Fedora (40) " Fingerprint: 115DF9AEF857853EE8445D0A0727707EA15B79CC From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-40-primary The key was successfully imported. [ 1/106] Verify package files 100% | 601.0 B/s | 104.0 B | 00m00s >>> Running pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Stop pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 [ 2/106] Prepare transaction 100% | 1.8 KiB/s | 104.0 B | 00m00s [ 3/106] Installing libgcc-0:14.2.1-3. 100% | 134.9 MiB/s | 276.3 KiB | 00m00s >>> Running post-install scriptlet: libgcc-0:14.2.1-3.fc40.x86_64 >>> Stop post-install scriptlet: libgcc-0:14.2.1-3.fc40.x86_64 [ 4/106] Installing crypto-policies-0: 100% | 16.9 MiB/s | 190.6 KiB | 00m00s >>> Running post-install scriptlet: crypto-policies-0:20241011-1.git5930b9a.fc40 >>> Stop post-install scriptlet: crypto-policies-0:20241011-1.git5930b9a.fc40.no [ 5/106] Installing fedora-release-ide 100% | 890.6 KiB/s | 912.0 B | 00m00s [ 6/106] Installing fedora-gpg-keys-0: 100% | 20.7 MiB/s | 169.7 KiB | 00m00s [ 7/106] Installing fedora-repos-0:40- 100% | 5.6 MiB/s | 5.7 KiB | 00m00s [ 8/106] Installing fedora-release-com 100% | 11.4 MiB/s | 23.3 KiB | 00m00s [ 9/106] Installing fedora-release-0:4 100% | 0.0 B/s | 124.0 B | 00m00s [ 10/106] Installing setup-0:2.14.5-2.f 100% | 47.3 MiB/s | 725.8 KiB | 00m00s >>> Running post-install scriptlet: setup-0:2.14.5-2.fc40.noarch >>> Stop post-install scriptlet: setup-0:2.14.5-2.fc40.noarch [ 11/106] Installing filesystem-0:3.18- 100% | 1.6 MiB/s | 212.4 KiB | 00m00s [ 12/106] Installing basesystem-0:11-20 100% | 121.1 KiB/s | 124.0 B | 00m00s [ 13/106] Installing coreutils-common-0 100% | 243.9 MiB/s | 11.5 MiB | 00m00s [ 14/106] Installing libssh-config-0:0. 100% | 0.0 B/s | 816.0 B | 00m00s [ 15/106] Installing publicsuffix-list- 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 16/106] Installing dnf-data-0:4.21.1- 100% | 40.0 MiB/s | 40.9 KiB | 00m00s [ 17/106] Installing pcre2-syntax-0:10. 100% | 124.1 MiB/s | 254.1 KiB | 00m00s [ 18/106] Installing ncurses-base-0:6.4 100% | 38.2 MiB/s | 351.6 KiB | 00m00s [ 19/106] Installing ncurses-libs-0:6.4 100% | 135.3 MiB/s | 969.7 KiB | 00m00s >>> Running pre-install scriptlet: glibc-0:2.39-22.fc40.x86_64 >>> Stop pre-install scriptlet: glibc-0:2.39-22.fc40.x86_64 [ 20/106] Installing glibc-0:2.39-22.fc 100% | 125.0 MiB/s | 6.6 MiB | 00m00s >>> Running post-install scriptlet: glibc-0:2.39-22.fc40.x86_64 >>> Stop post-install scriptlet: glibc-0:2.39-22.fc40.x86_64 [ 21/106] Installing bash-0:5.2.26-3.fc 100% | 263.3 MiB/s | 8.2 MiB | 00m00s >>> Running post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 >>> Stop post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 [ 22/106] Installing glibc-common-0:2.3 100% | 128.6 MiB/s | 1.0 MiB | 00m00s [ 23/106] Installing glibc-minimal-lang 100% | 0.0 B/s | 124.0 B | 00m00s [ 24/106] Installing zlib-ng-compat-0:2 100% | 131.6 MiB/s | 134.8 KiB | 00m00s [ 25/106] Installing libzstd-0:1.5.6-1. 100% | 256.9 MiB/s | 789.2 KiB | 00m00s [ 26/106] Installing xz-libs-1:5.4.6-3. 100% | 103.0 MiB/s | 210.9 KiB | 00m00s [ 27/106] Installing libstdc++-0:14.2.1 100% | 251.5 MiB/s | 2.8 MiB | 00m00s [ 28/106] Installing gmp-1:6.2.1-8.fc40 100% | 259.4 MiB/s | 796.8 KiB | 00m00s [ 29/106] Installing fmt-0:10.2.1-5.fc4 100% | 182.1 MiB/s | 372.9 KiB | 00m00s [ 30/106] Installing libxml2-0:2.12.8-1 100% | 244.6 MiB/s | 1.7 MiB | 00m00s [ 31/106] Installing bzip2-libs-0:1.0.8 100% | 79.9 MiB/s | 81.8 KiB | 00m00s [ 32/106] Installing popt-0:1.19-6.fc40 100% | 35.0 MiB/s | 143.5 KiB | 00m00s [ 33/106] Installing libffi-0:3.4.4-7.f 100% | 81.0 MiB/s | 83.0 KiB | 00m00s [ 34/106] Installing libtasn1-0:4.19.0- 100% | 86.7 MiB/s | 177.5 KiB | 00m00s [ 35/106] Installing p11-kit-0:0.25.5-1 100% | 147.2 MiB/s | 2.2 MiB | 00m00s [ 36/106] Installing libunistring-0:1.1 100% | 288.5 MiB/s | 1.7 MiB | 00m00s [ 37/106] Installing libidn2-0:2.3.7-1. 100% | 65.4 MiB/s | 335.0 KiB | 00m00s [ 38/106] Installing pcre2-0:10.44-1.fc 100% | 213.2 MiB/s | 654.9 KiB | 00m00s [ 39/106] Installing elfutils-libelf-0: 100% | 234.0 MiB/s | 1.2 MiB | 00m00s [ 40/106] Installing sqlite-libs-0:3.45 100% | 280.3 MiB/s | 1.4 MiB | 00m00s [ 41/106] Installing json-c-0:0.17-3.fc 100% | 81.7 MiB/s | 83.6 KiB | 00m00s [ 42/106] Installing lua-libs-0:5.4.6-5 100% | 137.8 MiB/s | 282.3 KiB | 00m00s [ 43/106] Installing libattr-0:2.5.2-3. 100% | 28.8 MiB/s | 29.5 KiB | 00m00s [ 44/106] Installing libacl-0:2.3.2-1.f 100% | 39.9 MiB/s | 40.8 KiB | 00m00s [ 45/106] Installing libsmartcols-0:2.4 100% | 177.3 MiB/s | 181.5 KiB | 00m00s [ 46/106] Installing libuuid-0:2.40.2-1 100% | 37.7 MiB/s | 38.6 KiB | 00m00s [ 47/106] Installing lz4-libs-0:1.9.4-6 100% | 127.4 MiB/s | 130.5 KiB | 00m00s [ 48/106] Installing libblkid-0:2.40.2- 100% | 126.8 MiB/s | 259.7 KiB | 00m00s [ 49/106] Installing grep-0:3.11-7.fc40 100% | 111.5 MiB/s | 1.0 MiB | 00m00s [ 50/106] Installing libpsl-0:0.21.5-3. 100% | 79.7 MiB/s | 81.6 KiB | 00m00s [ 51/106] Installing nettle-0:3.9.1-6.f 100% | 193.7 MiB/s | 793.3 KiB | 00m00s [ 52/106] Installing mpfr-0:4.2.1-4.fc4 100% | 203.5 MiB/s | 833.7 KiB | 00m00s [ 53/106] Installing file-libs-0:5.45-4 100% | 496.5 MiB/s | 9.9 MiB | 00m00s [ 54/106] Installing elfutils-default-y 100% | 145.9 KiB/s | 2.0 KiB | 00m00s >>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.192-4.fc40.n >>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.192-4.fc40.noar [ 55/106] Installing elfutils-libs-0:0. 100% | 164.1 MiB/s | 672.1 KiB | 00m00s [ 56/106] Installing libyaml-0:0.2.5-14 100% | 128.7 MiB/s | 131.8 KiB | 00m00s [ 57/106] Installing libsepol-0:3.7-2.f 100% | 266.5 MiB/s | 818.8 KiB | 00m00s [ 58/106] Installing libselinux-0:3.7-5 100% | 87.0 MiB/s | 178.3 KiB | 00m00s [ 59/106] Installing sed-0:4.9-1.fc40.x 100% | 121.3 MiB/s | 869.7 KiB | 00m00s [ 60/106] Installing libmount-0:2.40.2- 100% | 174.3 MiB/s | 356.9 KiB | 00m00s [ 61/106] Installing findutils-1:4.9.0- 100% | 162.9 MiB/s | 1.5 MiB | 00m00s [ 62/106] Installing libgomp-0:14.2.1-3 100% | 256.3 MiB/s | 525.0 KiB | 00m00s [ 63/106] Installing libcap-ng-0:0.8.4- 100% | 73.2 MiB/s | 75.0 KiB | 00m00s [ 64/106] Installing audit-libs-0:4.0.2 100% | 160.8 MiB/s | 329.3 KiB | 00m00s [ 65/106] Installing libeconf-0:0.6.2-2 100% | 58.3 MiB/s | 59.6 KiB | 00m00s [ 66/106] Installing pam-libs-0:1.6.1-3 100% | 67.1 MiB/s | 137.4 KiB | 00m00s [ 67/106] Installing libcap-0:2.69-8.fc 100% | 73.2 MiB/s | 224.8 KiB | 00m00s [ 68/106] Installing systemd-libs-0:255 100% | 241.8 MiB/s | 1.9 MiB | 00m00s [ 69/106] Installing sdbus-cpp-0:1.4.0- 100% | 151.2 MiB/s | 309.7 KiB | 00m00s [ 70/106] Installing alternatives-0:1.2 100% | 66.4 MiB/s | 68.0 KiB | 00m00s [ 71/106] Installing p11-kit-trust-0:0. 100% | 22.6 MiB/s | 393.1 KiB | 00m00s >>> Running post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc40.x86_64 >>> Stop post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc40.x86_64 [ 72/106] Installing gnutls-0:3.8.6-1.f 100% | 230.0 MiB/s | 3.2 MiB | 00m00s [ 73/106] Installing glib2-0:2.80.3-1.f 100% | 270.7 MiB/s | 14.6 MiB | 00m00s [ 74/106] Installing openssl-libs-1:3.2 100% | 301.0 MiB/s | 7.8 MiB | 00m00s [ 75/106] Installing coreutils-0:9.4-8. 100% | 135.5 MiB/s | 5.8 MiB | 00m00s >>> Running pre-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40 >>> Stop pre-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40.no [ 76/106] Installing ca-certificates-0: 100% | 2.5 MiB/s | 2.4 MiB | 00m01s >>> Running post-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc4 >>> Stop post-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40.n [ 77/106] Installing zchunk-libs-0:1.5. 100% | 50.1 MiB/s | 102.5 KiB | 00m00s [ 78/106] Installing rpm-sequoia-0:1.7. 100% | 263.1 MiB/s | 2.4 MiB | 00m00s [ 79/106] Installing rpm-libs-0:4.19.1. 100% | 231.6 MiB/s | 711.4 KiB | 00m00s [ 80/106] Installing rpm-build-libs-0:4 100% | 194.5 MiB/s | 199.2 KiB | 00m00s [ 81/106] Installing libmodulemd-0:2.15 100% | 234.3 MiB/s | 719.7 KiB | 00m00s [ 82/106] Installing libsolv-0:0.7.30-1 100% | 230.0 MiB/s | 941.9 KiB | 00m00s [ 83/106] Installing libarchive-0:3.7.2 100% | 225.7 MiB/s | 924.5 KiB | 00m00s [ 84/106] Installing libevent-0:2.1.12- 100% | 219.6 MiB/s | 899.4 KiB | 00m00s [ 85/106] Installing libbrotli-0:1.1.0- 100% | 203.1 MiB/s | 831.8 KiB | 00m00s [ 86/106] Installing libtool-ltdl-0:2.4 100% | 65.7 MiB/s | 67.3 KiB | 00m00s [ 87/106] Installing gdbm-libs-1:1.23-6 100% | 120.7 MiB/s | 123.6 KiB | 00m00s [ 88/106] Installing keyutils-libs-0:1. 100% | 54.5 MiB/s | 55.8 KiB | 00m00s [ 89/106] Installing libcom_err-0:1.47. 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 90/106] Installing libverto-0:0.3.2-8 100% | 30.5 MiB/s | 31.3 KiB | 00m00s [ 91/106] Installing libxcrypt-0:4.4.36 100% | 131.9 MiB/s | 270.2 KiB | 00m00s [ 92/106] Installing cyrus-sasl-lib-0:2 100% | 228.3 MiB/s | 2.3 MiB | 00m00s [ 93/106] Installing openldap-0:2.6.7-1 100% | 156.0 MiB/s | 638.9 KiB | 00m00s [ 94/106] Installing libnghttp2-0:1.59. 100% | 163.3 MiB/s | 167.2 KiB | 00m00s [ 95/106] Installing readline-0:8.2-8.f 100% | 160.0 MiB/s | 491.4 KiB | 00m00s [ 96/106] Installing gawk-0:5.3.0-3.fc4 100% | 172.8 MiB/s | 1.7 MiB | 00m00s [ 97/106] Installing krb5-libs-0:1.21.3 100% | 191.6 MiB/s | 2.3 MiB | 00m00s [ 98/106] Installing libssh-0:0.10.6-5. 100% | 166.5 MiB/s | 511.4 KiB | 00m00s [ 99/106] Installing libcurl-0:8.6.0-10 100% | 189.9 MiB/s | 777.9 KiB | 00m00s [100/106] Installing librepo-0:1.18.1-1 100% | 120.0 MiB/s | 245.7 KiB | 00m00s [101/106] Installing libdnf5-0:5.1.17-2 100% | 261.4 MiB/s | 2.9 MiB | 00m00s [102/106] Installing libdnf5-cli-0:5.1. 100% | 137.0 MiB/s | 561.0 KiB | 00m00s [103/106] Installing dnf5-0:5.1.17-2.fc 100% | 172.4 MiB/s | 1.7 MiB | 00m00s [104/106] Installing curl-0:8.6.0-10.fc 100% | 32.9 MiB/s | 740.9 KiB | 00m00s >>> Running pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Stop pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 [105/106] Installing rpm-0:4.19.1.1-1.f 100% | 85.6 MiB/s | 2.4 MiB | 00m00s [106/106] Installing dnf5-plugins-0:5.1 100% | 1.0 MiB/s | 1.1 MiB | 00m01s >>> Running post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Stop post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Running post-transaction scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0 >>> Stop post-transaction scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc >>> Running post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Stop post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Running trigger-install scriptlet: glibc-common-0:2.39-22.fc40.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39-22.fc40.x86_64 >>> Running trigger-install scriptlet: glib2-0:2.80.3-1.fc40.x86_64 >>> Stop trigger-install scriptlet: glib2-0:2.80.3-1.fc40.x86_64 Finish(bootstrap): installing dnf5 tooling Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-1731315110.058861/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Package manager dnf5 detected and used (direct choice) INFO: Buildroot is handled by package management installed into bootstrap: rpm-4.19.1.1-1.fc40.x86_64 rpm-sequoia-1.7.0-1.fc40.x86_64 dnf5-5.1.17-2.fc40.x86_64 dnf5-plugins-5.1.17-2.fc40.x86_64 Start: installing minimal buildroot with dnf5 Updating and loading repositories: updates 100% | 13.4 MiB/s | 11.9 MiB | 00m01s fedora 100% | 2.3 MiB/s | 20.8 MiB | 00m09s Copr repository 100% | 29.1 KiB/s | 2.7 KiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing group/module packages: bash x86_64 5.2.26-3.fc40 fedora 8.1 MiB bzip2 x86_64 1.0.8-18.fc40 fedora 91.7 KiB coreutils x86_64 9.4-8.fc40 updates 5.8 MiB cpio x86_64 2.15-1.fc40 fedora 1.1 MiB diffutils x86_64 3.10-5.fc40 fedora 1.6 MiB fedora-release-common noarch 40-39 updates 19.1 KiB findutils x86_64 1:4.9.0-9.fc40 updates 1.5 MiB gawk x86_64 5.3.0-3.fc40 fedora 1.7 MiB glibc-minimal-langpack x86_64 2.39-22.fc40 updates 0.0 B grep x86_64 3.11-7.fc40 fedora 1.0 MiB gzip x86_64 1.13-1.fc40 fedora 385.0 KiB info x86_64 7.1-2.fc40 fedora 357.8 KiB patch x86_64 2.7.6-24.fc40 fedora 262.8 KiB redhat-rpm-config noarch 288-1.fc40 updates 185.2 KiB rpm-build x86_64 4.19.1.1-1.fc40 fedora 173.7 KiB sed x86_64 4.9-1.fc40 fedora 861.5 KiB shadow-utils x86_64 2:4.15.1-4.fc40 updates 4.1 MiB tar x86_64 2:1.35-3.fc40 fedora 2.9 MiB unzip x86_64 6.0-63.fc40 fedora 382.8 KiB util-linux x86_64 2.40.2-1.fc40 updates 3.7 MiB which x86_64 2.21-41.fc40 fedora 80.2 KiB xz x86_64 1:5.4.6-3.fc40 fedora 2.0 MiB Installing dependencies: alternatives x86_64 1.27-1.fc40 updates 66.3 KiB ansible-srpm-macros noarch 1-16.fc40 updates 35.7 KiB audit-libs x86_64 4.0.2-1.fc40 updates 327.4 KiB authselect x86_64 1.5.0-6.fc40 updates 153.6 KiB authselect-libs x86_64 1.5.0-6.fc40 updates 818.2 KiB basesystem noarch 11-20.fc40 fedora 0.0 B binutils x86_64 2.41-37.fc40 updates 26.4 MiB binutils-gold x86_64 2.41-37.fc40 updates 2.0 MiB bzip2-libs x86_64 1.0.8-18.fc40 fedora 80.7 KiB ca-certificates noarch 2024.2.69_v8.0.401-1.0.fc40 updates 2.4 MiB coreutils-common x86_64 9.4-8.fc40 updates 11.4 MiB cracklib x86_64 2.9.11-5.fc40 fedora 238.9 KiB crypto-policies noarch 20241011-1.git5930b9a.fc40 updates 158.0 KiB curl x86_64 8.6.0-10.fc40 updates 738.6 KiB cyrus-sasl-lib x86_64 2.1.28-19.fc40 fedora 2.3 MiB debugedit x86_64 5.0-18.fc40 updates 199.3 KiB dwz x86_64 0.15-8.fc40 updates 294.9 KiB ed x86_64 1.20.2-1.fc40 updates 146.9 KiB efi-srpm-macros noarch 5-11.fc40 fedora 40.1 KiB elfutils x86_64 0.192-4.fc40 updates 2.7 MiB elfutils-debuginfod-client x86_64 0.192-4.fc40 updates 76.1 KiB elfutils-default-yama-scope noarch 0.192-4.fc40 updates 1.8 KiB elfutils-libelf x86_64 0.192-4.fc40 updates 1.2 MiB elfutils-libs x86_64 0.192-4.fc40 updates 670.3 KiB fedora-gpg-keys noarch 40-2 updates 124.7 KiB fedora-release noarch 40-39 updates 0.0 B fedora-release-identity-basic noarch 40-39 updates 654.0 B fedora-repos noarch 40-2 updates 4.9 KiB file x86_64 5.45-4.fc40 fedora 103.5 KiB file-libs x86_64 5.45-4.fc40 fedora 9.9 MiB filesystem x86_64 3.18-8.fc40 fedora 106.0 B fonts-srpm-macros noarch 1:2.0.5-14.fc40 fedora 55.3 KiB forge-srpm-macros noarch 0.3.2-1.fc40 updates 39.0 KiB fpc-srpm-macros noarch 1.3-12.fc40 fedora 144.0 B gdb-minimal x86_64 15.2-2.fc40 updates 13.0 MiB gdbm x86_64 1:1.23-6.fc40 fedora 460.9 KiB gdbm-libs x86_64 1:1.23-6.fc40 fedora 121.9 KiB ghc-srpm-macros noarch 1.9.1-1.fc40 updates 747.0 B glibc x86_64 2.39-22.fc40 updates 6.6 MiB glibc-common x86_64 2.39-22.fc40 updates 1.0 MiB glibc-gconv-extra x86_64 2.39-22.fc40 updates 7.8 MiB gmp x86_64 1:6.2.1-8.fc40 fedora 794.6 KiB gnat-srpm-macros noarch 6-5.fc40 fedora 1.0 KiB go-srpm-macros noarch 3.5.0-1.fc40 fedora 60.6 KiB jansson x86_64 2.13.1-9.fc40 fedora 88.3 KiB json-c x86_64 0.17-3.fc40 fedora 82.4 KiB kernel-srpm-macros noarch 1.0-23.fc40 fedora 1.9 KiB keyutils-libs x86_64 1.6.3-3.fc40 fedora 54.4 KiB krb5-libs x86_64 1.21.3-1.fc40 updates 2.3 MiB libacl x86_64 2.3.2-1.fc40 fedora 40.0 KiB libarchive x86_64 3.7.2-7.fc40 updates 922.6 KiB libattr x86_64 2.5.2-3.fc40 fedora 28.5 KiB libblkid x86_64 2.40.2-1.fc40 updates 258.6 KiB libbrotli x86_64 1.1.0-3.fc40 fedora 829.5 KiB libcap x86_64 2.69-8.fc40 updates 219.8 KiB libcap-ng x86_64 0.8.4-4.fc40 fedora 73.1 KiB libcom_err x86_64 1.47.0-5.fc40 fedora 67.2 KiB libcurl x86_64 8.6.0-10.fc40 updates 776.8 KiB libeconf x86_64 0.6.2-2.fc40 updates 58.0 KiB libevent x86_64 2.1.12-12.fc40 fedora 895.6 KiB libfdisk x86_64 2.40.2-1.fc40 updates 362.9 KiB libffi x86_64 3.4.4-7.fc40 fedora 81.6 KiB libgcc x86_64 14.2.1-3.fc40 updates 274.6 KiB libgomp x86_64 14.2.1-3.fc40 updates 523.6 KiB libidn2 x86_64 2.3.7-1.fc40 fedora 329.1 KiB libmount x86_64 2.40.2-1.fc40 updates 355.8 KiB libnghttp2 x86_64 1.59.0-3.fc40 updates 166.1 KiB libnsl2 x86_64 2.0.1-1.fc40 fedora 57.9 KiB libpkgconf x86_64 2.1.1-2.fc40 updates 74.2 KiB libpsl x86_64 0.21.5-3.fc40 fedora 80.5 KiB libpwquality x86_64 1.4.5-9.fc40 fedora 417.8 KiB libselinux x86_64 3.7-5.fc40 updates 177.0 KiB libsemanage x86_64 3.7-2.fc40 updates 293.5 KiB libsepol x86_64 3.7-2.fc40 updates 817.9 KiB libsmartcols x86_64 2.40.2-1.fc40 updates 180.4 KiB libssh x86_64 0.10.6-5.fc40 fedora 509.3 KiB libssh-config noarch 0.10.6-5.fc40 fedora 277.0 B libstdc++ x86_64 14.2.1-3.fc40 updates 2.8 MiB libtasn1 x86_64 4.19.0-6.fc40 fedora 175.7 KiB libtirpc x86_64 1.3.6-0.fc40 updates 202.7 KiB libtool-ltdl x86_64 2.4.7-10.fc40 fedora 66.2 KiB libunistring x86_64 1.1-7.fc40 fedora 1.7 MiB libutempter x86_64 1.2.1-13.fc40 fedora 57.7 KiB libuuid x86_64 2.40.2-1.fc40 updates 37.5 KiB libverto x86_64 0.3.2-8.fc40 fedora 29.5 KiB libxcrypt x86_64 4.4.36-10.fc40 updates 267.5 KiB libxml2 x86_64 2.12.8-1.fc40 updates 1.7 MiB libzstd x86_64 1.5.6-1.fc40 updates 787.9 KiB lua-libs x86_64 5.4.6-5.fc40 fedora 281.1 KiB lua-srpm-macros noarch 1-13.fc40 fedora 1.3 KiB lz4-libs x86_64 1.9.4-6.fc40 fedora 129.4 KiB mpfr x86_64 4.2.1-4.fc40 updates 832.0 KiB ncurses-base noarch 6.4-12.20240127.fc40 fedora 326.2 KiB ncurses-libs x86_64 6.4-12.20240127.fc40 fedora 963.2 KiB ocaml-srpm-macros noarch 9-3.fc40 fedora 1.9 KiB openblas-srpm-macros noarch 2-16.fc40 fedora 104.0 B openldap x86_64 2.6.7-1.fc40 fedora 635.1 KiB openssl-libs x86_64 1:3.2.2-3.fc40 updates 7.8 MiB p11-kit x86_64 0.25.5-1.fc40 updates 2.2 MiB p11-kit-trust x86_64 0.25.5-1.fc40 updates 391.4 KiB package-notes-srpm-macros noarch 0.5-11.fc40 fedora 1.6 KiB pam x86_64 1.6.1-3.fc40 updates 1.8 MiB pam-libs x86_64 1.6.1-3.fc40 updates 135.0 KiB pcre2 x86_64 10.44-1.fc40 updates 653.5 KiB pcre2-syntax noarch 10.44-1.fc40 updates 251.6 KiB perl-srpm-macros noarch 1-53.fc40 fedora 861.0 B pkgconf x86_64 2.1.1-2.fc40 updates 82.9 KiB pkgconf-m4 noarch 2.1.1-2.fc40 updates 13.9 KiB pkgconf-pkg-config x86_64 2.1.1-2.fc40 updates 989.0 B popt x86_64 1.19-6.fc40 fedora 136.9 KiB publicsuffix-list-dafsa noarch 20240107-3.fc40 fedora 67.5 KiB pyproject-srpm-macros noarch 1.16.0-1.fc40 updates 1.9 KiB python-srpm-macros noarch 3.12-8.fc40 updates 50.6 KiB qt5-srpm-macros noarch 5.15.15-1.fc40 updates 500.0 B qt6-srpm-macros noarch 6.7.2-2.fc40 updates 456.0 B readline x86_64 8.2-8.fc40 fedora 489.2 KiB rpm x86_64 4.19.1.1-1.fc40 fedora 3.0 MiB rpm-build-libs x86_64 4.19.1.1-1.fc40 fedora 198.4 KiB rpm-libs x86_64 4.19.1.1-1.fc40 fedora 709.9 KiB rpm-sequoia x86_64 1.7.0-1.fc40 updates 2.4 MiB rust-srpm-macros noarch 26.3-1.fc40 updates 4.8 KiB setup noarch 2.14.5-2.fc40 fedora 720.4 KiB sqlite-libs x86_64 3.45.1-2.fc40 fedora 1.4 MiB systemd-libs x86_64 255.13-1.fc40 updates 1.9 MiB util-linux-core x86_64 2.40.2-1.fc40 updates 1.5 MiB xxhash-libs x86_64 0.8.2-4.fc40 updates 88.5 KiB xz-libs x86_64 1:5.4.6-3.fc40 fedora 209.8 KiB zig-srpm-macros noarch 1-2.fc40 fedora 1.1 KiB zip x86_64 3.0-40.fc40 fedora 703.2 KiB zlib-ng-compat x86_64 2.1.7-2.fc40 updates 134.0 KiB zstd x86_64 1.5.6-1.fc40 updates 1.7 MiB Installing groups: Buildsystem building group Transaction Summary: Installing: 153 packages Total size of inbound packages is 53 MiB. Need to download 53 MiB. After this operation 179 MiB will be used (install 179 MiB, remove 0 B). [ 1/153] bzip2-0:1.0.8-18.fc40.x86_64 100% | 234.8 KiB/s | 52.4 KiB | 00m00s [ 2/153] cpio-0:2.15-1.fc40.x86_64 100% | 854.5 KiB/s | 292.2 KiB | 00m00s [ 3/153] diffutils-0:3.10-5.fc40.x86_6 100% | 2.4 MiB/s | 405.6 KiB | 00m00s [ 4/153] bash-0:5.2.26-3.fc40.x86_64 100% | 4.4 MiB/s | 1.8 MiB | 00m00s [ 5/153] grep-0:3.11-7.fc40.x86_64 100% | 3.5 MiB/s | 300.2 KiB | 00m00s [ 6/153] gzip-0:1.13-1.fc40.x86_64 100% | 3.1 MiB/s | 170.6 KiB | 00m00s [ 7/153] info-0:7.1-2.fc40.x86_64 100% | 3.0 MiB/s | 182.3 KiB | 00m00s [ 8/153] patch-0:2.7.6-24.fc40.x86_64 100% | 2.6 MiB/s | 130.7 KiB | 00m00s [ 9/153] rpm-build-0:4.19.1.1-1.fc40.x 100% | 1.7 MiB/s | 78.2 KiB | 00m00s [ 10/153] sed-0:4.9-1.fc40.x86_64 100% | 5.3 MiB/s | 318.2 KiB | 00m00s [ 11/153] unzip-0:6.0-63.fc40.x86_64 100% | 2.4 MiB/s | 184.5 KiB | 00m00s [ 12/153] which-0:2.21-41.fc40.x86_64 100% | 668.5 KiB/s | 41.4 KiB | 00m00s [ 13/153] tar-2:1.35-3.fc40.x86_64 100% | 5.9 MiB/s | 856.6 KiB | 00m00s [ 14/153] xz-1:5.4.6-3.fc40.x86_64 100% | 6.5 MiB/s | 557.4 KiB | 00m00s [ 15/153] fedora-release-common-0:40-39 100% | 210.8 KiB/s | 21.3 KiB | 00m00s [ 16/153] gawk-0:5.3.0-3.fc40.x86_64 100% | 16.0 MiB/s | 1.1 MiB | 00m00s [ 17/153] coreutils-0:9.4-8.fc40.x86_64 100% | 4.9 MiB/s | 1.1 MiB | 00m00s [ 18/153] findutils-1:4.9.0-9.fc40.x86_ 100% | 2.4 MiB/s | 491.4 KiB | 00m00s [ 19/153] redhat-rpm-config-0:288-1.fc4 100% | 2.7 MiB/s | 82.1 KiB | 00m00s [ 20/153] glibc-minimal-langpack-0:2.39 100% | 1.4 MiB/s | 106.3 KiB | 00m00s [ 21/153] util-linux-0:2.40.2-1.fc40.x8 100% | 14.7 MiB/s | 1.2 MiB | 00m00s [ 22/153] shadow-utils-2:4.15.1-4.fc40. 100% | 13.3 MiB/s | 1.3 MiB | 00m00s [ 23/153] filesystem-0:3.18-8.fc40.x86_ 100% | 10.8 MiB/s | 1.1 MiB | 00m00s [ 24/153] ncurses-libs-0:6.4-12.2024012 100% | 5.0 MiB/s | 332.5 KiB | 00m00s [ 25/153] bzip2-libs-0:1.0.8-18.fc40.x8 100% | 592.2 KiB/s | 40.9 KiB | 00m00s [ 26/153] libattr-0:2.5.2-3.fc40.x86_64 100% | 272.7 KiB/s | 18.0 KiB | 00m00s [ 27/153] file-0:5.45-4.fc40.x86_64 100% | 1.2 MiB/s | 49.0 KiB | 00m00s [ 28/153] popt-0:1.19-6.fc40.x86_64 100% | 1.2 MiB/s | 66.7 KiB | 00m00s [ 29/153] readline-0:8.2-8.fc40.x86_64 100% | 3.4 MiB/s | 213.3 KiB | 00m00s [ 30/153] rpm-0:4.19.1.1-1.fc40.x86_64 100% | 7.4 MiB/s | 540.1 KiB | 00m00s [ 31/153] rpm-build-libs-0:4.19.1.1-1.f 100% | 1.9 MiB/s | 95.0 KiB | 00m00s [ 32/153] rpm-libs-0:4.19.1.1-1.fc40.x8 100% | 5.8 MiB/s | 308.9 KiB | 00m00s [ 33/153] libacl-0:2.3.2-1.fc40.x86_64 100% | 381.7 KiB/s | 24.4 KiB | 00m00s [ 34/153] xz-libs-1:5.4.6-3.fc40.x86_64 100% | 1.3 MiB/s | 110.0 KiB | 00m00s [ 35/153] gmp-1:6.2.1-8.fc40.x86_64 100% | 6.6 MiB/s | 312.5 KiB | 00m00s [ 36/153] coreutils-common-0:9.4-8.fc40 100% | 24.2 MiB/s | 2.1 MiB | 00m00s [ 37/153] efi-srpm-macros-0:5-11.fc40.n 100% | 495.5 KiB/s | 22.3 KiB | 00m00s [ 38/153] fonts-srpm-macros-1:2.0.5-14. 100% | 576.5 KiB/s | 26.5 KiB | 00m00s [ 39/153] glibc-common-0:2.39-22.fc40.x 100% | 4.8 MiB/s | 390.4 KiB | 00m00s [ 40/153] fpc-srpm-macros-0:1.3-12.fc40 100% | 191.0 KiB/s | 7.8 KiB | 00m00s [ 41/153] gnat-srpm-macros-0:6-5.fc40.n 100% | 226.2 KiB/s | 8.8 KiB | 00m00s [ 42/153] go-srpm-macros-0:3.5.0-1.fc40 100% | 706.4 KiB/s | 27.5 KiB | 00m00s [ 43/153] kernel-srpm-macros-0:1.0-23.f 100% | 249.4 KiB/s | 9.7 KiB | 00m00s [ 44/153] lua-srpm-macros-0:1-13.fc40.n 100% | 223.9 KiB/s | 8.7 KiB | 00m00s [ 45/153] ocaml-srpm-macros-0:9-3.fc40. 100% | 232.6 KiB/s | 9.1 KiB | 00m00s [ 46/153] openblas-srpm-macros-0:2-16.f 100% | 178.6 KiB/s | 7.5 KiB | 00m00s [ 47/153] package-notes-srpm-macros-0:0 100% | 236.8 KiB/s | 9.9 KiB | 00m00s [ 48/153] perl-srpm-macros-0:1-53.fc40. 100% | 199.6 KiB/s | 8.4 KiB | 00m00s [ 49/153] zig-srpm-macros-0:1-2.fc40.no 100% | 206.1 KiB/s | 8.0 KiB | 00m00s [ 50/153] zip-0:3.0-40.fc40.x86_64 100% | 5.2 MiB/s | 264.8 KiB | 00m00s [ 51/153] setup-0:2.14.5-2.fc40.noarch 100% | 2.5 MiB/s | 154.7 KiB | 00m00s [ 52/153] util-linux-core-0:2.40.2-1.fc 100% | 15.4 MiB/s | 536.6 KiB | 00m00s [ 53/153] libcap-ng-0:0.8.4-4.fc40.x86_ 100% | 680.1 KiB/s | 32.6 KiB | 00m00s [ 54/153] libutempter-0:1.2.1-13.fc40.x 100% | 614.1 KiB/s | 26.4 KiB | 00m00s [ 55/153] ncurses-base-0:6.4-12.2024012 100% | 1.3 MiB/s | 88.8 KiB | 00m00s [ 56/153] file-libs-0:5.45-4.fc40.x86_6 100% | 12.6 MiB/s | 762.7 KiB | 00m00s [ 57/153] lua-libs-0:5.4.6-5.fc40.x86_6 100% | 2.0 MiB/s | 131.9 KiB | 00m00s [ 58/153] glibc-0:2.39-22.fc40.x86_64 100% | 36.2 MiB/s | 2.2 MiB | 00m00s [ 59/153] sqlite-libs-0:3.45.1-2.fc40.x 100% | 8.5 MiB/s | 705.1 KiB | 00m00s [ 60/153] libselinux-0:3.7-5.fc40.x86_6 100% | 2.9 MiB/s | 88.0 KiB | 00m00s [ 61/153] basesystem-0:11-20.fc40.noarc 100% | 126.1 KiB/s | 7.2 KiB | 00m00s [ 62/153] libsepol-0:3.7-2.fc40.x86_64 100% | 10.8 MiB/s | 342.2 KiB | 00m00s [ 63/153] zlib-ng-compat-0:2.1.7-2.fc40 100% | 3.2 MiB/s | 77.7 KiB | 00m00s [ 64/153] libcap-0:2.69-8.fc40.x86_64 100% | 3.5 MiB/s | 85.7 KiB | 00m00s [ 65/153] glibc-gconv-extra-0:2.39-22.f 100% | 11.5 MiB/s | 1.7 MiB | 00m00s [ 66/153] libzstd-0:1.5.6-1.fc40.x86_64 100% | 10.8 MiB/s | 309.2 KiB | 00m00s [ 67/153] rpm-sequoia-0:1.7.0-1.fc40.x8 100% | 26.4 MiB/s | 892.8 KiB | 00m00s [ 68/153] elfutils-libelf-0:0.192-4.fc4 100% | 7.8 MiB/s | 208.4 KiB | 00m00s [ 69/153] elfutils-libs-0:0.192-4.fc40. 100% | 9.2 MiB/s | 263.4 KiB | 00m00s [ 70/153] elfutils-0:0.192-4.fc40.x86_6 100% | 19.0 MiB/s | 546.0 KiB | 00m00s [ 71/153] elfutils-debuginfod-client-0: 100% | 1.6 MiB/s | 43.7 KiB | 00m00s [ 72/153] libgcc-0:14.2.1-3.fc40.x86_64 100% | 5.2 MiB/s | 133.3 KiB | 00m00s [ 73/153] libgomp-0:14.2.1-3.fc40.x86_6 100% | 11.1 MiB/s | 353.9 KiB | 00m00s [ 74/153] json-c-0:0.17-3.fc40.x86_64 100% | 898.4 KiB/s | 44.0 KiB | 00m00s [ 75/153] debugedit-0:5.0-18.fc40.x86_6 100% | 2.4 MiB/s | 80.0 KiB | 00m00s [ 76/153] jansson-0:2.13.1-9.fc40.x86_6 100% | 1.1 MiB/s | 44.2 KiB | 00m00s [ 77/153] pkgconf-pkg-config-0:2.1.1-2. 100% | 428.1 KiB/s | 9.8 KiB | 00m00s [ 78/153] pkgconf-0:2.1.1-2.fc40.x86_64 100% | 1.9 MiB/s | 43.7 KiB | 00m00s [ 79/153] pkgconf-m4-0:2.1.1-2.fc40.noa 100% | 610.4 KiB/s | 14.0 KiB | 00m00s [ 80/153] libpkgconf-0:2.1.1-2.fc40.x86 100% | 1.6 MiB/s | 37.9 KiB | 00m00s [ 81/153] binutils-0:2.41-37.fc40.x86_6 100% | 45.2 MiB/s | 6.2 MiB | 00m00s [ 82/153] zstd-0:1.5.6-1.fc40.x86_64 100% | 10.0 MiB/s | 479.4 KiB | 00m00s [ 83/153] lz4-libs-0:1.9.4-6.fc40.x86_6 100% | 1.2 MiB/s | 67.2 KiB | 00m00s [ 84/153] curl-0:8.6.0-10.fc40.x86_64 100% | 10.1 MiB/s | 299.2 KiB | 00m00s [ 85/153] libarchive-0:3.7.2-7.fc40.x86 100% | 12.5 MiB/s | 408.5 KiB | 00m00s [ 86/153] ed-0:1.20.2-1.fc40.x86_64 100% | 3.3 MiB/s | 81.9 KiB | 00m00s [ 87/153] pcre2-0:10.44-1.fc40.x86_64 100% | 9.1 MiB/s | 242.9 KiB | 00m00s [ 88/153] pcre2-syntax-0:10.44-1.fc40.n 100% | 5.9 MiB/s | 149.8 KiB | 00m00s [ 89/153] forge-srpm-macros-0:0.3.2-1.f 100% | 855.1 KiB/s | 19.7 KiB | 00m00s [ 90/153] mpfr-0:4.2.1-4.fc40.x86_64 100% | 10.6 MiB/s | 348.9 KiB | 00m00s [ 91/153] libblkid-0:2.40.2-1.fc40.x86_ 100% | 4.3 MiB/s | 124.1 KiB | 00m00s [ 92/153] libstdc++-0:14.2.1-3.fc40.x86 100% | 23.4 MiB/s | 886.5 KiB | 00m00s [ 93/153] libuuid-0:2.40.2-1.fc40.x86_6 100% | 1.2 MiB/s | 28.6 KiB | 00m00s [ 94/153] libmount-0:2.40.2-1.fc40.x86_ 100% | 6.1 MiB/s | 155.2 KiB | 00m00s [ 95/153] libsmartcols-0:2.40.2-1.fc40. 100% | 3.4 MiB/s | 83.2 KiB | 00m00s [ 96/153] libxcrypt-0:4.4.36-10.fc40.x8 100% | 4.8 MiB/s | 119.0 KiB | 00m00s [ 97/153] audit-libs-0:4.0.2-1.fc40.x86 100% | 5.1 MiB/s | 125.8 KiB | 00m00s [ 98/153] systemd-libs-0:255.13-1.fc40. 100% | 19.2 MiB/s | 707.3 KiB | 00m00s [ 99/153] authselect-libs-0:1.5.0-6.fc4 100% | 8.2 MiB/s | 217.9 KiB | 00m00s [100/153] libfdisk-0:2.40.2-1.fc40.x86_ 100% | 6.2 MiB/s | 159.3 KiB | 00m00s [101/153] pam-0:1.6.1-3.fc40.x86_64 100% | 16.9 MiB/s | 553.4 KiB | 00m00s [102/153] authselect-0:1.5.0-6.fc40.x86 100% | 5.7 MiB/s | 145.5 KiB | 00m00s [103/153] pam-libs-0:1.6.1-3.fc40.x86_6 100% | 2.4 MiB/s | 57.1 KiB | 00m00s [104/153] gdbm-libs-1:1.23-6.fc40.x86_6 100% | 1.0 MiB/s | 56.2 KiB | 00m00s [105/153] libnsl2-0:2.0.1-1.fc40.x86_64 100% | 441.3 KiB/s | 29.6 KiB | 00m00s [106/153] libpwquality-0:1.4.5-9.fc40.x 100% | 1.5 MiB/s | 119.7 KiB | 00m00s [107/153] libeconf-0:0.6.2-2.fc40.x86_6 100% | 1.3 MiB/s | 32.0 KiB | 00m00s [108/153] cracklib-0:2.9.11-5.fc40.x86_ 100% | 1.8 MiB/s | 92.5 KiB | 00m00s [109/153] libsemanage-0:3.7-2.fc40.x86_ 100% | 4.7 MiB/s | 116.1 KiB | 00m00s [110/153] ansible-srpm-macros-0:1-16.fc 100% | 901.0 KiB/s | 20.7 KiB | 00m00s [111/153] dwz-0:0.15-8.fc40.x86_64 100% | 5.2 MiB/s | 138.7 KiB | 00m00s [112/153] ghc-srpm-macros-0:1.9.1-1.fc4 100% | 330.6 KiB/s | 8.9 KiB | 00m00s [113/153] openssl-libs-1:3.2.2-3.fc40.x 100% | 39.1 MiB/s | 2.3 MiB | 00m00s [114/153] pyproject-srpm-macros-0:1.16. 100% | 591.7 KiB/s | 13.6 KiB | 00m00s [115/153] python-srpm-macros-0:3.12-8.f 100% | 1.0 MiB/s | 23.4 KiB | 00m00s [116/153] qt5-srpm-macros-0:5.15.15-1.f 100% | 387.1 KiB/s | 8.9 KiB | 00m00s [117/153] qt6-srpm-macros-0:6.7.2-2.fc4 100% | 391.2 KiB/s | 9.0 KiB | 00m00s [118/153] rust-srpm-macros-0:26.3-1.fc4 100% | 544.0 KiB/s | 12.5 KiB | 00m00s [119/153] libtirpc-0:1.3.6-0.fc40.x86_6 100% | 3.8 MiB/s | 93.9 KiB | 00m00s [120/153] libcom_err-0:1.47.0-5.fc40.x8 100% | 478.4 KiB/s | 25.4 KiB | 00m00s [121/153] ca-certificates-0:2024.2.69_v 100% | 23.6 MiB/s | 871.2 KiB | 00m00s [122/153] crypto-policies-0:20241011-1. 100% | 4.0 MiB/s | 98.9 KiB | 00m00s [123/153] gdbm-1:1.23-6.fc40.x86_64 100% | 2.4 MiB/s | 152.5 KiB | 00m00s [124/153] krb5-libs-0:1.21.3-1.fc40.x86 100% | 21.7 MiB/s | 757.0 KiB | 00m00s [125/153] libxml2-0:2.12.8-1.fc40.x86_6 100% | 20.3 MiB/s | 687.1 KiB | 00m00s [126/153] keyutils-libs-0:1.6.3-3.fc40. 100% | 605.2 KiB/s | 31.5 KiB | 00m00s [127/153] libverto-0:0.3.2-8.fc40.x86_6 100% | 311.2 KiB/s | 20.5 KiB | 00m00s [128/153] fedora-repos-0:40-2.noarch 100% | 412.4 KiB/s | 9.5 KiB | 00m00s [129/153] fedora-gpg-keys-0:40-2.noarch 100% | 5.4 MiB/s | 132.1 KiB | 00m00s [130/153] elfutils-default-yama-scope-0 100% | 514.6 KiB/s | 12.4 KiB | 00m00s [131/153] p11-kit-0:0.25.5-1.fc40.x86_6 100% | 15.5 MiB/s | 491.2 KiB | 00m00s [132/153] p11-kit-trust-0:0.25.5-1.fc40 100% | 5.2 MiB/s | 132.0 KiB | 00m00s [133/153] libffi-0:3.4.4-7.fc40.x86_64 100% | 787.3 KiB/s | 39.4 KiB | 00m00s [134/153] libtasn1-0:4.19.0-6.fc40.x86_ 100% | 1.5 MiB/s | 73.7 KiB | 00m00s [135/153] alternatives-0:1.27-1.fc40.x8 100% | 1.7 MiB/s | 40.7 KiB | 00m00s [136/153] binutils-gold-0:2.41-37.fc40. 100% | 21.2 MiB/s | 780.6 KiB | 00m00s [137/153] fedora-release-0:40-39.noarch 100% | 450.2 KiB/s | 10.8 KiB | 00m00s [138/153] xxhash-libs-0:0.8.2-4.fc40.x8 100% | 997.8 KiB/s | 36.9 KiB | 00m00s [139/153] fedora-release-identity-basic 100% | 322.0 KiB/s | 11.6 KiB | 00m00s [140/153] libcurl-0:8.6.0-10.fc40.x86_6 100% | 9.6 MiB/s | 344.8 KiB | 00m00s [141/153] gdb-minimal-0:15.2-2.fc40.x86 100% | 31.9 MiB/s | 4.3 MiB | 00m00s [142/153] libidn2-0:2.3.7-1.fc40.x86_64 100% | 2.3 MiB/s | 118.7 KiB | 00m00s [143/153] libbrotli-0:1.1.0-3.fc40.x86_ 100% | 3.5 MiB/s | 338.4 KiB | 00m00s [144/153] libpsl-0:0.21.5-3.fc40.x86_64 100% | 1.3 MiB/s | 63.9 KiB | 00m00s [145/153] libssh-0:0.10.6-5.fc40.x86_64 100% | 3.1 MiB/s | 210.6 KiB | 00m00s [146/153] openldap-0:2.6.7-1.fc40.x86_6 100% | 3.4 MiB/s | 254.3 KiB | 00m00s [147/153] libunistring-0:1.1-7.fc40.x86 100% | 6.9 MiB/s | 545.5 KiB | 00m00s [148/153] publicsuffix-list-dafsa-0:202 100% | 984.5 KiB/s | 58.1 KiB | 00m00s [149/153] libssh-config-0:0.10.6-5.fc40 100% | 155.7 KiB/s | 9.0 KiB | 00m00s [150/153] libevent-0:2.1.12-12.fc40.x86 100% | 4.1 MiB/s | 257.2 KiB | 00m00s [151/153] libtool-ltdl-0:2.4.7-10.fc40. 100% | 645.7 KiB/s | 36.2 KiB | 00m00s [152/153] cyrus-sasl-lib-0:2.1.28-19.fc 100% | 10.1 MiB/s | 789.3 KiB | 00m00s [153/153] libnghttp2-0:1.59.0-3.fc40.x8 100% | 3.1 MiB/s | 75.3 KiB | 00m00s -------------------------------------------------------------------------------- [153/153] Total 100% | 17.9 MiB/s | 52.9 MiB | 00m03s Running transaction Importing PGP key 0xA15B79CC: Userid : "Fedora (40) " Fingerprint: 115DF9AEF857853EE8445D0A0727707EA15B79CC From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-40-primary The key was successfully imported. [ 1/155] Verify package files 100% | 725.0 B/s | 153.0 B | 00m00s >>> Running pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Stop pre-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 [ 2/155] Prepare transaction 100% | 1.8 KiB/s | 153.0 B | 00m00s [ 3/155] Installing libgcc-0:14.2.1-3. 100% | 134.9 MiB/s | 276.3 KiB | 00m00s >>> Running post-install scriptlet: libgcc-0:14.2.1-3.fc40.x86_64 >>> Stop post-install scriptlet: libgcc-0:14.2.1-3.fc40.x86_64 [ 4/155] Installing crypto-policies-0: 100% | 18.6 MiB/s | 190.6 KiB | 00m00s >>> Running post-install scriptlet: crypto-policies-0:20241011-1.git5930b9a.fc40 >>> Stop post-install scriptlet: crypto-policies-0:20241011-1.git5930b9a.fc40.no [ 5/155] Installing fedora-release-ide 100% | 890.6 KiB/s | 912.0 B | 00m00s [ 6/155] Installing fedora-gpg-keys-0: 100% | 20.7 MiB/s | 169.7 KiB | 00m00s [ 7/155] Installing fedora-repos-0:40- 100% | 0.0 B/s | 5.7 KiB | 00m00s [ 8/155] Installing fedora-release-com 100% | 11.4 MiB/s | 23.3 KiB | 00m00s [ 9/155] Installing fedora-release-0:4 100% | 0.0 B/s | 124.0 B | 00m00s [ 10/155] Installing setup-0:2.14.5-2.f 100% | 47.3 MiB/s | 725.8 KiB | 00m00s >>> Running post-install scriptlet: setup-0:2.14.5-2.fc40.noarch >>> Stop post-install scriptlet: setup-0:2.14.5-2.fc40.noarch [ 11/155] Installing filesystem-0:3.18- 100% | 1.6 MiB/s | 212.4 KiB | 00m00s [ 12/155] Installing basesystem-0:11-20 100% | 0.0 B/s | 124.0 B | 00m00s [ 13/155] Installing libssh-config-0:0. 100% | 0.0 B/s | 816.0 B | 00m00s [ 14/155] Installing publicsuffix-list- 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 15/155] Installing rust-srpm-macros-0 100% | 0.0 B/s | 5.6 KiB | 00m00s [ 16/155] Installing qt6-srpm-macros-0: 100% | 0.0 B/s | 732.0 B | 00m00s [ 17/155] Installing qt5-srpm-macros-0: 100% | 0.0 B/s | 776.0 B | 00m00s [ 18/155] Installing ghc-srpm-macros-0: 100% | 0.0 B/s | 1.0 KiB | 00m00s [ 19/155] Installing ansible-srpm-macro 100% | 0.0 B/s | 36.2 KiB | 00m00s [ 20/155] Installing pcre2-syntax-0:10. 100% | 124.1 MiB/s | 254.1 KiB | 00m00s [ 21/155] Installing pkgconf-m4-0:2.1.1 100% | 14.0 MiB/s | 14.3 KiB | 00m00s [ 22/155] Installing ncurses-base-0:6.4 100% | 38.2 MiB/s | 351.6 KiB | 00m00s [ 23/155] Installing glibc-minimal-lang 100% | 0.0 B/s | 124.0 B | 00m00s [ 24/155] Installing ncurses-libs-0:6.4 100% | 135.3 MiB/s | 969.7 KiB | 00m00s >>> Running pre-install scriptlet: glibc-0:2.39-22.fc40.x86_64 >>> Stop pre-install scriptlet: glibc-0:2.39-22.fc40.x86_64 [ 25/155] Installing glibc-0:2.39-22.fc 100% | 135.3 MiB/s | 6.6 MiB | 00m00s >>> Running post-install scriptlet: glibc-0:2.39-22.fc40.x86_64 >>> Stop post-install scriptlet: glibc-0:2.39-22.fc40.x86_64 [ 26/155] Installing bash-0:5.2.26-3.fc 100% | 263.3 MiB/s | 8.2 MiB | 00m00s >>> Running post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 >>> Stop post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 [ 27/155] Installing glibc-common-0:2.3 100% | 128.6 MiB/s | 1.0 MiB | 00m00s [ 28/155] Installing glibc-gconv-extra- 100% | 129.3 MiB/s | 7.9 MiB | 00m00s >>> Running post-install scriptlet: glibc-gconv-extra-0:2.39-22.fc40.x86_64 >>> Stop post-install scriptlet: glibc-gconv-extra-0:2.39-22.fc40.x86_64 [ 29/155] Installing zlib-ng-compat-0:2 100% | 131.6 MiB/s | 134.8 KiB | 00m00s [ 30/155] Installing xz-libs-1:5.4.6-3. 100% | 206.0 MiB/s | 210.9 KiB | 00m00s [ 31/155] Installing bzip2-libs-0:1.0.8 100% | 79.9 MiB/s | 81.8 KiB | 00m00s [ 32/155] Installing popt-0:1.19-6.fc40 100% | 35.0 MiB/s | 143.5 KiB | 00m00s [ 33/155] Installing readline-0:8.2-8.f 100% | 160.0 MiB/s | 491.4 KiB | 00m00s [ 34/155] Installing libzstd-0:1.5.6-1. 100% | 256.9 MiB/s | 789.2 KiB | 00m00s [ 35/155] Installing elfutils-libelf-0: 100% | 234.0 MiB/s | 1.2 MiB | 00m00s [ 36/155] Installing libstdc++-0:14.2.1 100% | 276.6 MiB/s | 2.8 MiB | 00m00s [ 37/155] Installing libuuid-0:2.40.2-1 100% | 37.7 MiB/s | 38.6 KiB | 00m00s [ 38/155] Installing libblkid-0:2.40.2- 100% | 126.8 MiB/s | 259.7 KiB | 00m00s [ 39/155] Installing libattr-0:2.5.2-3. 100% | 28.8 MiB/s | 29.5 KiB | 00m00s [ 40/155] Installing libacl-0:2.3.2-1.f 100% | 39.9 MiB/s | 40.8 KiB | 00m00s [ 41/155] Installing gmp-1:6.2.1-8.fc40 100% | 259.4 MiB/s | 796.8 KiB | 00m00s [ 42/155] Installing libxcrypt-0:4.4.36 100% | 131.9 MiB/s | 270.2 KiB | 00m00s [ 43/155] Installing lz4-libs-0:1.9.4-6 100% | 127.4 MiB/s | 130.5 KiB | 00m00s [ 44/155] Installing gdbm-libs-1:1.23-6 100% | 120.7 MiB/s | 123.6 KiB | 00m00s [ 45/155] Installing libeconf-0:0.6.2-2 100% | 58.3 MiB/s | 59.6 KiB | 00m00s [ 46/155] Installing mpfr-0:4.2.1-4.fc4 100% | 203.5 MiB/s | 833.7 KiB | 00m00s [ 47/155] Installing gawk-0:5.3.0-3.fc4 100% | 172.8 MiB/s | 1.7 MiB | 00m00s [ 48/155] Installing dwz-0:0.15-8.fc40. 100% | 144.7 MiB/s | 296.3 KiB | 00m00s [ 49/155] Installing unzip-0:6.0-63.fc4 100% | 125.8 MiB/s | 386.3 KiB | 00m00s [ 50/155] Installing file-libs-0:5.45-4 100% | 472.9 MiB/s | 9.9 MiB | 00m00s [ 51/155] Installing file-0:5.45-4.fc40 100% | 102.6 MiB/s | 105.0 KiB | 00m00s [ 52/155] Installing libcap-ng-0:0.8.4- 100% | 73.2 MiB/s | 75.0 KiB | 00m00s [ 53/155] Installing audit-libs-0:4.0.2 100% | 160.8 MiB/s | 329.3 KiB | 00m00s [ 54/155] Installing pam-libs-0:1.6.1-3 100% | 67.1 MiB/s | 137.4 KiB | 00m00s [ 55/155] Installing libcap-0:2.69-8.fc 100% | 36.6 MiB/s | 224.8 KiB | 00m00s [ 56/155] Installing systemd-libs-0:255 100% | 241.8 MiB/s | 1.9 MiB | 00m00s [ 57/155] Installing lua-libs-0:5.4.6-5 100% | 137.8 MiB/s | 282.3 KiB | 00m00s [ 58/155] Installing libsepol-0:3.7-2.f 100% | 266.5 MiB/s | 818.8 KiB | 00m00s [ 59/155] Installing jansson-0:2.13.1-9 100% | 87.6 MiB/s | 89.7 KiB | 00m00s [ 60/155] Installing pcre2-0:10.44-1.fc 100% | 213.2 MiB/s | 654.9 KiB | 00m00s [ 61/155] Installing libselinux-0:3.7-5 100% | 87.0 MiB/s | 178.3 KiB | 00m00s [ 62/155] Installing sed-0:4.9-1.fc40.x 100% | 121.3 MiB/s | 869.7 KiB | 00m00s [ 63/155] Installing grep-0:3.11-7.fc40 100% | 111.5 MiB/s | 1.0 MiB | 00m00s [ 64/155] Installing findutils-1:4.9.0- 100% | 146.6 MiB/s | 1.5 MiB | 00m00s [ 65/155] Installing xz-1:5.4.6-3.fc40. 100% | 143.0 MiB/s | 2.0 MiB | 00m00s [ 66/155] Installing libmount-0:2.40.2- 100% | 174.3 MiB/s | 356.9 KiB | 00m00s [ 67/155] Installing libsmartcols-0:2.4 100% | 88.6 MiB/s | 181.5 KiB | 00m00s [ 68/155] Installing libcom_err-0:1.47. 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 69/155] Installing libffi-0:3.4.4-7.f 100% | 81.0 MiB/s | 83.0 KiB | 00m00s [ 70/155] Installing libtasn1-0:4.19.0- 100% | 86.7 MiB/s | 177.5 KiB | 00m00s [ 71/155] Installing p11-kit-0:0.25.5-1 100% | 147.2 MiB/s | 2.2 MiB | 00m00s [ 72/155] Installing alternatives-0:1.2 100% | 66.4 MiB/s | 68.0 KiB | 00m00s [ 73/155] Installing libunistring-0:1.1 100% | 247.2 MiB/s | 1.7 MiB | 00m00s [ 74/155] Installing libidn2-0:2.3.7-1. 100% | 65.4 MiB/s | 335.0 KiB | 00m00s [ 75/155] Installing libpsl-0:0.21.5-3. 100% | 79.7 MiB/s | 81.6 KiB | 00m00s [ 76/155] Installing p11-kit-trust-0:0. 100% | 25.6 MiB/s | 393.1 KiB | 00m00s >>> Running post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc40.x86_64 >>> Stop post-install scriptlet: p11-kit-trust-0:0.25.5-1.fc40.x86_64 [ 77/155] Installing util-linux-core-0: 100% | 123.8 MiB/s | 1.5 MiB | 00m00s [ 78/155] Installing tar-2:1.35-3.fc40. 100% | 210.8 MiB/s | 3.0 MiB | 00m00s [ 79/155] Installing libsemanage-0:3.7- 100% | 96.1 MiB/s | 295.2 KiB | 00m00s [ 80/155] Installing shadow-utils-2:4.1 100% | 80.3 MiB/s | 4.2 MiB | 00m00s >>> Running pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64 >>> Stop pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64 [ 81/155] Installing libutempter-0:1.2. 100% | 29.2 MiB/s | 59.7 KiB | 00m00s [ 82/155] Installing zip-0:3.0-40.fc40. 100% | 172.6 MiB/s | 707.1 KiB | 00m00s [ 83/155] Installing gdbm-1:1.23-6.fc40 100% | 113.7 MiB/s | 465.8 KiB | 00m00s [ 84/155] Installing cyrus-sasl-lib-0:2 100% | 228.3 MiB/s | 2.3 MiB | 00m00s [ 85/155] Installing zstd-0:1.5.6-1.fc4 100% | 279.3 MiB/s | 1.7 MiB | 00m00s [ 86/155] Installing libfdisk-0:2.40.2- 100% | 177.7 MiB/s | 364.0 KiB | 00m00s [ 87/155] Installing bzip2-0:1.0.8-18.f 100% | 47.0 MiB/s | 96.2 KiB | 00m00s [ 88/155] Installing libxml2-0:2.12.8-1 100% | 244.6 MiB/s | 1.7 MiB | 00m00s [ 89/155] Installing sqlite-libs-0:3.45 100% | 233.6 MiB/s | 1.4 MiB | 00m00s [ 90/155] Installing ed-0:1.20.2-1.fc40 100% | 72.8 MiB/s | 149.2 KiB | 00m00s [ 91/155] Installing patch-0:2.7.6-24.f 100% | 129.0 MiB/s | 264.3 KiB | 00m00s [ 92/155] Installing elfutils-default-y 100% | 204.3 KiB/s | 2.0 KiB | 00m00s >>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.192-4.fc40.n >>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.192-4.fc40.noar [ 93/155] Installing cpio-0:2.15-1.fc40 100% | 137.5 MiB/s | 1.1 MiB | 00m00s [ 94/155] Installing diffutils-0:3.10-5 100% | 176.2 MiB/s | 1.6 MiB | 00m00s [ 95/155] Installing json-c-0:0.17-3.fc 100% | 81.7 MiB/s | 83.6 KiB | 00m00s [ 96/155] Installing libgomp-0:14.2.1-3 100% | 256.3 MiB/s | 525.0 KiB | 00m00s [ 97/155] Installing libpkgconf-0:2.1.1 100% | 73.5 MiB/s | 75.3 KiB | 00m00s [ 98/155] Installing pkgconf-0:2.1.1-2. 100% | 41.7 MiB/s | 85.4 KiB | 00m00s [ 99/155] Installing pkgconf-pkg-config 100% | 1.7 MiB/s | 1.8 KiB | 00m00s [100/155] Installing keyutils-libs-0:1. 100% | 54.5 MiB/s | 55.8 KiB | 00m00s [101/155] Installing libverto-0:0.3.2-8 100% | 30.5 MiB/s | 31.3 KiB | 00m00s [102/155] Installing xxhash-libs-0:0.8. 100% | 87.7 MiB/s | 89.9 KiB | 00m00s [103/155] Installing libbrotli-0:1.1.0- 100% | 203.1 MiB/s | 831.8 KiB | 00m00s [104/155] Installing libtool-ltdl-0:2.4 100% | 65.7 MiB/s | 67.3 KiB | 00m00s [105/155] Installing libnghttp2-0:1.59. 100% | 163.3 MiB/s | 167.2 KiB | 00m00s [106/155] Installing perl-srpm-macros-0 100% | 0.0 B/s | 1.1 KiB | 00m00s [107/155] Installing package-notes-srpm 100% | 0.0 B/s | 2.0 KiB | 00m00s [108/155] Installing openblas-srpm-macr 100% | 0.0 B/s | 384.0 B | 00m00s [109/155] Installing ocaml-srpm-macros- 100% | 0.0 B/s | 2.2 KiB | 00m00s [110/155] Installing kernel-srpm-macros 100% | 0.0 B/s | 2.3 KiB | 00m00s [111/155] Installing gnat-srpm-macros-0 100% | 0.0 B/s | 1.3 KiB | 00m00s [112/155] Installing fpc-srpm-macros-0: 100% | 410.2 KiB/s | 420.0 B | 00m00s [113/155] Installing coreutils-common-0 100% | 249.2 MiB/s | 11.5 MiB | 00m00s [114/155] Installing openssl-libs-1:3.2 100% | 313.0 MiB/s | 7.8 MiB | 00m00s [115/155] Installing coreutils-0:9.4-8. 100% | 157.5 MiB/s | 5.8 MiB | 00m00s >>> Running pre-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40 >>> Stop pre-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40.no [116/155] Installing ca-certificates-0: 100% | 2.5 MiB/s | 2.4 MiB | 00m01s >>> Running post-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc4 >>> Stop post-install scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc40.n [117/155] Installing krb5-libs-0:1.21.3 100% | 176.9 MiB/s | 2.3 MiB | 00m00s [118/155] Installing libtirpc-0:1.3.6-0 100% | 99.9 MiB/s | 204.5 KiB | 00m00s [119/155] Installing gzip-0:1.13-1.fc40 100% | 127.1 MiB/s | 390.6 KiB | 00m00s [120/155] Installing authselect-libs-0: 100% | 90.4 MiB/s | 833.2 KiB | 00m00s [121/155] Installing libarchive-0:3.7.2 100% | 225.7 MiB/s | 924.5 KiB | 00m00s [122/155] Installing authselect-0:1.5.0 100% | 38.6 MiB/s | 157.9 KiB | 00m00s [123/155] Installing cracklib-0:2.9.11- 100% | 34.9 MiB/s | 250.3 KiB | 00m00s [124/155] Installing libpwquality-0:1.4 100% | 52.5 MiB/s | 430.1 KiB | 00m00s [125/155] Installing libnsl2-0:2.0.1-1. 100% | 28.8 MiB/s | 59.0 KiB | 00m00s [126/155] Installing pam-0:1.6.1-3.fc40 100% | 79.1 MiB/s | 1.8 MiB | 00m00s [127/155] Installing libssh-0:0.10.6-5. 100% | 166.5 MiB/s | 511.4 KiB | 00m00s [128/155] Installing rpm-sequoia-0:1.7. 100% | 263.1 MiB/s | 2.4 MiB | 00m00s [129/155] Installing rpm-libs-0:4.19.1. 100% | 231.6 MiB/s | 711.4 KiB | 00m00s [130/155] Installing libevent-0:2.1.12- 100% | 175.7 MiB/s | 899.4 KiB | 00m00s [131/155] Installing openldap-0:2.6.7-1 100% | 156.0 MiB/s | 638.9 KiB | 00m00s [132/155] Installing libcurl-0:8.6.0-10 100% | 189.9 MiB/s | 777.9 KiB | 00m00s [133/155] Installing elfutils-libs-0:0. 100% | 218.8 MiB/s | 672.1 KiB | 00m00s [134/155] Installing elfutils-debuginfo 100% | 38.2 MiB/s | 78.2 KiB | 00m00s [135/155] Installing binutils-0:2.41-37 100% | 266.7 MiB/s | 26.4 MiB | 00m00s >>> Running post-install scriptlet: binutils-0:2.41-37.fc40.x86_64 >>> Stop post-install scriptlet: binutils-0:2.41-37.fc40.x86_64 [136/155] Installing binutils-gold-0:2. 100% | 106.9 MiB/s | 2.0 MiB | 00m00s >>> Running post-install scriptlet: binutils-gold-0:2.41-37.fc40.x86_64 >>> Stop post-install scriptlet: binutils-gold-0:2.41-37.fc40.x86_64 [137/155] Installing elfutils-0:0.192-4 100% | 221.7 MiB/s | 2.7 MiB | 00m00s [138/155] Installing gdb-minimal-0:15.2 100% | 309.3 MiB/s | 13.0 MiB | 00m00s [139/155] Installing debugedit-0:5.0-18 100% | 98.6 MiB/s | 202.0 KiB | 00m00s [140/155] Installing rpm-build-libs-0:4 100% | 97.3 MiB/s | 199.2 KiB | 00m00s [141/155] Installing curl-0:8.6.0-10.fc 100% | 38.1 MiB/s | 740.9 KiB | 00m00s >>> Running pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Stop pre-install scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 [142/155] Installing rpm-0:4.19.1.1-1.f 100% | 88.8 MiB/s | 2.4 MiB | 00m00s [143/155] Installing efi-srpm-macros-0: 100% | 40.2 MiB/s | 41.2 KiB | 00m00s [144/155] Installing lua-srpm-macros-0: 100% | 0.0 B/s | 1.9 KiB | 00m00s [145/155] Installing zig-srpm-macros-0: 100% | 0.0 B/s | 1.7 KiB | 00m00s [146/155] Installing fonts-srpm-macros- 100% | 55.1 MiB/s | 56.5 KiB | 00m00s [147/155] Installing go-srpm-macros-0:3 100% | 60.2 MiB/s | 61.6 KiB | 00m00s [148/155] Installing forge-srpm-macros- 100% | 39.4 MiB/s | 40.4 KiB | 00m00s [149/155] Installing python-srpm-macros 100% | 50.6 MiB/s | 51.8 KiB | 00m00s [150/155] Installing redhat-rpm-config- 100% | 62.5 MiB/s | 191.9 KiB | 00m00s [151/155] Installing rpm-build-0:4.19.1 100% | 44.4 MiB/s | 182.0 KiB | 00m00s [152/155] Installing pyproject-srpm-mac 100% | 1.2 MiB/s | 2.5 KiB | 00m00s [153/155] Installing util-linux-0:2.40. 100% | 91.4 MiB/s | 3.7 MiB | 00m00s >>> Running post-install scriptlet: util-linux-0:2.40.2-1.fc40.x86_64 >>> Stop post-install scriptlet: util-linux-0:2.40.2-1.fc40.x86_64 [154/155] Installing which-0:2.21-41.fc 100% | 40.3 MiB/s | 82.4 KiB | 00m00s [155/155] Installing info-0:7.1-2.fc40. 100% | 285.6 KiB/s | 358.2 KiB | 00m01s >>> Running post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Stop post-transaction scriptlet: filesystem-0:3.18-8.fc40.x86_64 >>> Running post-transaction scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0 >>> Stop post-transaction scriptlet: ca-certificates-0:2024.2.69_v8.0.401-1.0.fc >>> Running post-transaction scriptlet: authselect-libs-0:1.5.0-6.fc40.x86_64 >>> Stop post-transaction scriptlet: authselect-libs-0:1.5.0-6.fc40.x86_64 >>> Running post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Stop post-transaction scriptlet: rpm-0:4.19.1.1-1.fc40.x86_64 >>> Running trigger-install scriptlet: glibc-common-0:2.39-22.fc40.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39-22.fc40.x86_64 >>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 >>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 Finish: installing minimal buildroot with dnf5 Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: alternatives-1.27-1.fc40.x86_64 ansible-srpm-macros-1-16.fc40.noarch audit-libs-4.0.2-1.fc40.x86_64 authselect-1.5.0-6.fc40.x86_64 authselect-libs-1.5.0-6.fc40.x86_64 basesystem-11-20.fc40.noarch bash-5.2.26-3.fc40.x86_64 binutils-2.41-37.fc40.x86_64 binutils-gold-2.41-37.fc40.x86_64 bzip2-1.0.8-18.fc40.x86_64 bzip2-libs-1.0.8-18.fc40.x86_64 ca-certificates-2024.2.69_v8.0.401-1.0.fc40.noarch coreutils-9.4-8.fc40.x86_64 coreutils-common-9.4-8.fc40.x86_64 cpio-2.15-1.fc40.x86_64 cracklib-2.9.11-5.fc40.x86_64 crypto-policies-20241011-1.git5930b9a.fc40.noarch curl-8.6.0-10.fc40.x86_64 cyrus-sasl-lib-2.1.28-19.fc40.x86_64 debugedit-5.0-18.fc40.x86_64 diffutils-3.10-5.fc40.x86_64 dwz-0.15-8.fc40.x86_64 ed-1.20.2-1.fc40.x86_64 efi-srpm-macros-5-11.fc40.noarch elfutils-0.192-4.fc40.x86_64 elfutils-debuginfod-client-0.192-4.fc40.x86_64 elfutils-default-yama-scope-0.192-4.fc40.noarch elfutils-libelf-0.192-4.fc40.x86_64 elfutils-libs-0.192-4.fc40.x86_64 fedora-gpg-keys-40-2.noarch fedora-release-40-39.noarch fedora-release-common-40-39.noarch fedora-release-identity-basic-40-39.noarch fedora-repos-40-2.noarch file-5.45-4.fc40.x86_64 file-libs-5.45-4.fc40.x86_64 filesystem-3.18-8.fc40.x86_64 findutils-4.9.0-9.fc40.x86_64 fonts-srpm-macros-2.0.5-14.fc40.noarch forge-srpm-macros-0.3.2-1.fc40.noarch fpc-srpm-macros-1.3-12.fc40.noarch gawk-5.3.0-3.fc40.x86_64 gdb-minimal-15.2-2.fc40.x86_64 gdbm-1.23-6.fc40.x86_64 gdbm-libs-1.23-6.fc40.x86_64 ghc-srpm-macros-1.9.1-1.fc40.noarch glibc-2.39-22.fc40.x86_64 glibc-common-2.39-22.fc40.x86_64 glibc-gconv-extra-2.39-22.fc40.x86_64 glibc-minimal-langpack-2.39-22.fc40.x86_64 gmp-6.2.1-8.fc40.x86_64 gnat-srpm-macros-6-5.fc40.noarch go-srpm-macros-3.5.0-1.fc40.noarch gpg-pubkey-a15b79cc-63d04c2c grep-3.11-7.fc40.x86_64 gzip-1.13-1.fc40.x86_64 info-7.1-2.fc40.x86_64 jansson-2.13.1-9.fc40.x86_64 json-c-0.17-3.fc40.x86_64 kernel-srpm-macros-1.0-23.fc40.noarch keyutils-libs-1.6.3-3.fc40.x86_64 krb5-libs-1.21.3-1.fc40.x86_64 libacl-2.3.2-1.fc40.x86_64 libarchive-3.7.2-7.fc40.x86_64 libattr-2.5.2-3.fc40.x86_64 libblkid-2.40.2-1.fc40.x86_64 libbrotli-1.1.0-3.fc40.x86_64 libcap-2.69-8.fc40.x86_64 libcap-ng-0.8.4-4.fc40.x86_64 libcom_err-1.47.0-5.fc40.x86_64 libcurl-8.6.0-10.fc40.x86_64 libeconf-0.6.2-2.fc40.x86_64 libevent-2.1.12-12.fc40.x86_64 libfdisk-2.40.2-1.fc40.x86_64 libffi-3.4.4-7.fc40.x86_64 libgcc-14.2.1-3.fc40.x86_64 libgomp-14.2.1-3.fc40.x86_64 libidn2-2.3.7-1.fc40.x86_64 libmount-2.40.2-1.fc40.x86_64 libnghttp2-1.59.0-3.fc40.x86_64 libnsl2-2.0.1-1.fc40.x86_64 libpkgconf-2.1.1-2.fc40.x86_64 libpsl-0.21.5-3.fc40.x86_64 libpwquality-1.4.5-9.fc40.x86_64 libselinux-3.7-5.fc40.x86_64 libsemanage-3.7-2.fc40.x86_64 libsepol-3.7-2.fc40.x86_64 libsmartcols-2.40.2-1.fc40.x86_64 libssh-0.10.6-5.fc40.x86_64 libssh-config-0.10.6-5.fc40.noarch libstdc++-14.2.1-3.fc40.x86_64 libtasn1-4.19.0-6.fc40.x86_64 libtirpc-1.3.6-0.fc40.x86_64 libtool-ltdl-2.4.7-10.fc40.x86_64 libunistring-1.1-7.fc40.x86_64 libutempter-1.2.1-13.fc40.x86_64 libuuid-2.40.2-1.fc40.x86_64 libverto-0.3.2-8.fc40.x86_64 libxcrypt-4.4.36-10.fc40.x86_64 libxml2-2.12.8-1.fc40.x86_64 libzstd-1.5.6-1.fc40.x86_64 lua-libs-5.4.6-5.fc40.x86_64 lua-srpm-macros-1-13.fc40.noarch lz4-libs-1.9.4-6.fc40.x86_64 mpfr-4.2.1-4.fc40.x86_64 ncurses-base-6.4-12.20240127.fc40.noarch ncurses-libs-6.4-12.20240127.fc40.x86_64 ocaml-srpm-macros-9-3.fc40.noarch openblas-srpm-macros-2-16.fc40.noarch openldap-2.6.7-1.fc40.x86_64 openssl-libs-3.2.2-3.fc40.x86_64 p11-kit-0.25.5-1.fc40.x86_64 p11-kit-trust-0.25.5-1.fc40.x86_64 package-notes-srpm-macros-0.5-11.fc40.noarch pam-1.6.1-3.fc40.x86_64 pam-libs-1.6.1-3.fc40.x86_64 patch-2.7.6-24.fc40.x86_64 pcre2-10.44-1.fc40.x86_64 pcre2-syntax-10.44-1.fc40.noarch perl-srpm-macros-1-53.fc40.noarch pkgconf-2.1.1-2.fc40.x86_64 pkgconf-m4-2.1.1-2.fc40.noarch pkgconf-pkg-config-2.1.1-2.fc40.x86_64 popt-1.19-6.fc40.x86_64 publicsuffix-list-dafsa-20240107-3.fc40.noarch pyproject-srpm-macros-1.16.0-1.fc40.noarch python-srpm-macros-3.12-8.fc40.noarch qt5-srpm-macros-5.15.15-1.fc40.noarch qt6-srpm-macros-6.7.2-2.fc40.noarch readline-8.2-8.fc40.x86_64 redhat-rpm-config-288-1.fc40.noarch rpm-4.19.1.1-1.fc40.x86_64 rpm-build-4.19.1.1-1.fc40.x86_64 rpm-build-libs-4.19.1.1-1.fc40.x86_64 rpm-libs-4.19.1.1-1.fc40.x86_64 rpm-sequoia-1.7.0-1.fc40.x86_64 rust-srpm-macros-26.3-1.fc40.noarch sed-4.9-1.fc40.x86_64 setup-2.14.5-2.fc40.noarch shadow-utils-4.15.1-4.fc40.x86_64 sqlite-libs-3.45.1-2.fc40.x86_64 systemd-libs-255.13-1.fc40.x86_64 tar-1.35-3.fc40.x86_64 unzip-6.0-63.fc40.x86_64 util-linux-2.40.2-1.fc40.x86_64 util-linux-core-2.40.2-1.fc40.x86_64 which-2.21-41.fc40.x86_64 xxhash-libs-0.8.2-4.fc40.x86_64 xz-5.4.6-3.fc40.x86_64 xz-libs-5.4.6-3.fc40.x86_64 zig-srpm-macros-1-2.fc40.noarch zip-3.0-40.fc40.x86_64 zlib-ng-compat-2.1.7-2.fc40.x86_64 zstd-1.5.6-1.fc40.x86_64 Start: buildsrpm Start: rpmbuild -bs Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1444435200 Wrote: /builddir/build/SRPMS/pc-ble-driver-py-0.17.0-1.fc40.src.rpm Finish: rpmbuild -bs INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-40-x86_64-1731315110.058861/root/var/log/dnf5.log INFO: chroot_scan: creating tarball /var/lib/copr-rpmbuild/results/chroot_scan.tar.gz /bin/tar: Removing leading `/' from member names Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-bt30sjrh/pc-ble-driver-py/pc-ble-driver-py.spec) Config(child) 0 minutes 49 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot INFO: Start(/var/lib/copr-rpmbuild/results/pc-ble-driver-py-0.17.0-1.fc40.src.rpm) Config(fedora-40-x86_64) Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1731315110.058861/root. INFO: reusing tmpfs at /var/lib/mock/fedora-40-x86_64-bootstrap-1731315110.058861/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-40-x86_64-1731315110.058861/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Buildroot is handled by package management installed into bootstrap: rpm-4.19.1.1-1.fc40.x86_64 rpm-sequoia-1.7.0-1.fc40.x86_64 dnf5-5.1.17-2.fc40.x86_64 dnf5-plugins-5.1.17-2.fc40.x86_64 Finish: chroot init Start: build phase for pc-ble-driver-py-0.17.0-1.fc40.src.rpm Start: build setup for pc-ble-driver-py-0.17.0-1.fc40.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1444435200 Wrote: /builddir/build/SRPMS/pc-ble-driver-py-0.17.0-1.fc40.src.rpm Updating and loading repositories: updates 100% | 894.1 KiB/s | 30.4 KiB | 00m00s fedora 100% | 1.3 MiB/s | 31.3 KiB | 00m00s Copr repository 100% | 32.9 KiB/s | 1.5 KiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing: python3-devel x86_64 3.12.7-1.fc40 updates 1.3 MiB python3-setuptools noarch 69.0.3-4.fc40 updates 7.1 MiB Installing dependencies: expat x86_64 2.6.3-1.fc40 updates 287.5 KiB libb2 x86_64 0.98.1-11.fc40 fedora 42.2 KiB mpdecimal x86_64 2.5.1-9.fc40 fedora 200.9 KiB pyproject-rpm-macros noarch 1.16.0-1.fc40 updates 114.4 KiB python-pip-wheel noarch 23.3.2-2.fc40 updates 1.5 MiB python-rpm-macros noarch 3.12-8.fc40 updates 22.1 KiB python3 x86_64 3.12.7-1.fc40 updates 31.5 KiB python3-libs x86_64 3.12.7-1.fc40 updates 41.2 MiB python3-packaging noarch 23.2-4.fc40 fedora 421.1 KiB python3-rpm-generators noarch 14-10.fc40 fedora 81.7 KiB python3-rpm-macros noarch 3.12-8.fc40 updates 6.4 KiB tzdata noarch 2024a-5.fc40 updates 1.6 MiB Transaction Summary: Installing: 14 packages Total size of inbound packages is 14 MiB. Need to download 14 MiB. After this operation 54 MiB will be used (install 54 MiB, remove 0 B). [ 1/14] python3-devel-0:3.12.7-1.fc40.x 100% | 1.8 MiB/s | 313.8 KiB | 00m00s [ 2/14] python3-setuptools-0:69.0.3-4.f 100% | 7.0 MiB/s | 1.5 MiB | 00m00s [ 3/14] libb2-0:0.98.1-11.fc40.x86_64 100% | 410.8 KiB/s | 25.5 KiB | 00m00s [ 4/14] mpdecimal-0:2.5.1-9.fc40.x86_64 100% | 2.7 MiB/s | 88.6 KiB | 00m00s [ 5/14] pyproject-rpm-macros-0:1.16.0-1 100% | 1.8 MiB/s | 44.6 KiB | 00m00s [ 6/14] python-rpm-macros-0:3.12-8.fc40 100% | 672.8 KiB/s | 17.5 KiB | 00m00s [ 7/14] python3-rpm-macros-0:3.12-8.fc4 100% | 471.8 KiB/s | 12.3 KiB | 00m00s [ 8/14] python3-rpm-generators-0:14-10. 100% | 2.6 MiB/s | 29.6 KiB | 00m00s [ 9/14] python3-packaging-0:23.2-4.fc40 100% | 6.4 MiB/s | 125.2 KiB | 00m00s [10/14] python3-0:3.12.7-1.fc40.x86_64 100% | 1.1 MiB/s | 28.0 KiB | 00m00s [11/14] expat-0:2.6.3-1.fc40.x86_64 100% | 6.6 MiB/s | 114.1 KiB | 00m00s [12/14] python3-libs-0:3.12.7-1.fc40.x8 100% | 22.9 MiB/s | 9.1 MiB | 00m00s [13/14] tzdata-0:2024a-5.fc40.noarch 100% | 8.6 MiB/s | 716.1 KiB | 00m00s [14/14] python-pip-wheel-0:23.3.2-2.fc4 100% | 11.3 MiB/s | 1.5 MiB | 00m00s -------------------------------------------------------------------------------- [14/14] Total 100% | 22.3 MiB/s | 13.6 MiB | 00m01s Running transaction [ 1/16] Verify package files 100% | 311.0 B/s | 14.0 B | 00m00s [ 2/16] Prepare transaction 100% | 291.0 B/s | 14.0 B | 00m00s [ 3/16] Installing python-rpm-macros-0: 100% | 22.3 MiB/s | 22.8 KiB | 00m00s [ 4/16] Installing python3-rpm-macros-0 100% | 0.0 B/s | 6.7 KiB | 00m00s [ 5/16] Installing pyproject-rpm-macros 100% | 22.7 MiB/s | 116.4 KiB | 00m00s [ 6/16] Installing tzdata-0:2024a-5.fc4 100% | 27.9 MiB/s | 1.9 MiB | 00m00s [ 7/16] Installing python-pip-wheel-0:2 100% | 508.9 MiB/s | 1.5 MiB | 00m00s [ 8/16] Installing expat-0:2.6.3-1.fc40 100% | 141.4 MiB/s | 289.6 KiB | 00m00s [ 9/16] Installing mpdecimal-0:2.5.1-9. 100% | 197.3 MiB/s | 202.0 KiB | 00m00s [10/16] Installing libb2-0:0.98.1-11.fc 100% | 42.3 MiB/s | 43.3 KiB | 00m00s [11/16] Installing python3-0:3.12.7-1.f 100% | 5.4 MiB/s | 33.3 KiB | 00m00s [12/16] Installing python3-libs-0:3.12. 100% | 210.3 MiB/s | 41.6 MiB | 00m00s [13/16] Installing python3-packaging-0: 100% | 105.4 MiB/s | 431.9 KiB | 00m00s [14/16] Installing python3-rpm-generato 100% | 81.0 MiB/s | 82.9 KiB | 00m00s [15/16] Installing python3-devel-0:3.12 100% | 93.5 MiB/s | 1.3 MiB | 00m00s [16/16] Installing python3-setuptools-0 100% | 88.0 MiB/s | 7.3 MiB | 00m00s >>> Running trigger-install scriptlet: glibc-common-0:2.39-22.fc40.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39-22.fc40.x86_64 Finish: build setup for pc-ble-driver-py-0.17.0-1.fc40.src.rpm Start: rpmbuild pc-ble-driver-py-0.17.0-1.fc40.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1444435200 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.R97t8O + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf pc-ble-driver-py-0.17.0 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/pc-ble-driver-py-0.17.0.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd pc-ble-driver-py-0.17.0 + rm -rf /builddir/build/BUILD/pc-ble-driver-py-0.17.0-SPECPARTS + /usr/bin/mkdir -p /builddir/build/BUILD/pc-ble-driver-py-0.17.0-SPECPARTS + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + sed -i s/skbuild/setuptools/ setup.py + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.KaLS7M + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd pc-ble-driver-py-0.17.0 + /usr/bin/python3 setup.py build running build running build_py creating build creating build/lib creating build/lib/pc_ble_driver_py copying pc_ble_driver_py/__init__.py -> build/lib/pc_ble_driver_py copying pc_ble_driver_py/ble_adapter.py -> build/lib/pc_ble_driver_py copying pc_ble_driver_py/ble_driver.py -> build/lib/pc_ble_driver_py copying pc_ble_driver_py/ble_driver_types.py -> build/lib/pc_ble_driver_py copying pc_ble_driver_py/config.py -> build/lib/pc_ble_driver_py copying pc_ble_driver_py/exceptions.py -> build/lib/pc_ble_driver_py copying pc_ble_driver_py/observers.py -> build/lib/pc_ble_driver_py creating build/lib/pc_ble_driver_py/examples copying pc_ble_driver_py/examples/__init__.py -> build/lib/pc_ble_driver_py/examples copying pc_ble_driver_py/examples/advertising.py -> build/lib/pc_ble_driver_py/examples copying pc_ble_driver_py/examples/heart_rate_collector.py -> build/lib/pc_ble_driver_py/examples copying pc_ble_driver_py/examples/serial_port_enum.py -> build/lib/pc_ble_driver_py/examples creating build/lib/pc_ble_driver_py/hex copying pc_ble_driver_py/hex/__init__.py -> build/lib/pc_ble_driver_py/hex creating build/lib/pc_ble_driver_py/lib copying pc_ble_driver_py/lib/__init__.py -> build/lib/pc_ble_driver_py/lib creating build/lib/pc_ble_driver_py/hex/sd_api_v2 copying pc_ble_driver_py/hex/sd_api_v2/__init__.py -> build/lib/pc_ble_driver_py/hex/sd_api_v2 creating build/lib/pc_ble_driver_py/hex/sd_api_v5 copying pc_ble_driver_py/hex/sd_api_v5/__init__.py -> build/lib/pc_ble_driver_py/hex/sd_api_v5 + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.GVj1KL + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 ++ dirname /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd pc-ble-driver-py-0.17.0 + /usr/bin/python3 setup.py install --skip-build --root /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 running install /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. Follow the current Python packaging guidelines when building Python RPM packages. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html and https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/ for details. ******************************************************************************** !! self.initialize_options() running install_lib creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12 creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/__init__.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/ble_adapter.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/ble_driver.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/ble_driver_types.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/config.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/exceptions.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py copying build/lib/pc_ble_driver_py/observers.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples copying build/lib/pc_ble_driver_py/examples/__init__.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples copying build/lib/pc_ble_driver_py/examples/advertising.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples copying build/lib/pc_ble_driver_py/examples/heart_rate_collector.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples copying build/lib/pc_ble_driver_py/examples/serial_port_enum.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex copying build/lib/pc_ble_driver_py/hex/__init__.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/sd_api_v2 copying build/lib/pc_ble_driver_py/hex/sd_api_v2/__init__.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/sd_api_v2 creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/sd_api_v5 copying build/lib/pc_ble_driver_py/hex/sd_api_v5/__init__.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/sd_api_v5 creating /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/lib copying build/lib/pc_ble_driver_py/lib/__init__.py -> /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/lib byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/ble_adapter.py to ble_adapter.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/ble_driver.py to ble_driver.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/ble_driver_types.py to ble_driver_types.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/config.py to config.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/exceptions.py to exceptions.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/observers.py to observers.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples/advertising.py to advertising.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples/heart_rate_collector.py to heart_rate_collector.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/examples/serial_port_enum.py to serial_port_enum.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/sd_api_v2/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/hex/sd_api_v5/__init__.py to __init__.cpython-312.pyc byte-compiling /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py/lib/__init__.py to __init__.cpython-312.pyc running install_egg_info running egg_info creating pc_ble_driver_py.egg-info writing pc_ble_driver_py.egg-info/PKG-INFO writing dependency_links to pc_ble_driver_py.egg-info/dependency_links.txt writing requirements to pc_ble_driver_py.egg-info/requires.txt writing top-level names to pc_ble_driver_py.egg-info/top_level.txt writing manifest file 'pc_ble_driver_py.egg-info/SOURCES.txt' reading manifest file 'pc_ble_driver_py.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no previously-included files matching '__pycache__' found under directory '*' adding license file 'LICENSE' warning: no previously-included files matching '*.py[co]' found under directory '*' writing manifest file 'pc_ble_driver_py.egg-info/SOURCES.txt' Copying pc_ble_driver_py.egg-info to /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12/site-packages/pc_ble_driver_py-0.17.0-py3.12.egg-info running install_scripts + /usr/bin/find-debuginfo -j2 --strict-build-id -m -i --build-id-seed 0.17.0-1.fc40 --unique-debug-suffix -0.17.0-1.fc40.x86_64 --unique-debug-src-base pc-ble-driver-py-0.17.0-1.fc40.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/pc-ble-driver-py-0.17.0 find-debuginfo: starting Extracting debug info from 0 files Creating .debug symlinks for symlinks to ELF files find: ‘debug’: No such file or directory find-debuginfo: done + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs + /usr/lib/rpm/brp-remove-la-files + env /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j2 Bytecompiling .py files below /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/lib/python3.12 using python3.12 + /usr/lib/rpm/redhat/brp-python-hardlink Processing files: python3-pc-ble-driver-py-0.17.0-1.fc40.noarch Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.PiYSvS + umask 022 + cd /builddir/build/BUILD + cd pc-ble-driver-py-0.17.0 + LICENSEDIR=/builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/share/licenses/python3-pc-ble-driver-py + export LC_ALL= + LC_ALL= + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/share/licenses/python3-pc-ble-driver-py + cp -pr /builddir/build/BUILD/pc-ble-driver-py-0.17.0/LICENSE /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64/usr/share/licenses/python3-pc-ble-driver-py + RPM_EC=0 ++ jobs -p + exit 0 Provides: python-pc-ble-driver-py = 0.17.0-1.fc40 python3-pc-ble-driver-py = 0.17.0-1.fc40 python3.12-pc-ble-driver-py = 0.17.0-1.fc40 python3.12dist(pc-ble-driver-py) = 0.17 python3dist(pc-ble-driver-py) = 0.17 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: python(abi) = 3.12 python3.12dist(cryptography) python3.12dist(wrapt) Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 Wrote: /builddir/build/RPMS/python3-pc-ble-driver-py-0.17.0-1.fc40.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.S91v7c + umask 022 + cd /builddir/build/BUILD + cd pc-ble-driver-py-0.17.0 + /usr/bin/rm -rf /builddir/build/BUILDROOT/pc-ble-driver-py-0.17.0-1.fc40.x86_64 + RPM_EC=0 ++ jobs -p + exit 0 Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.YtjqfP + umask 022 + cd /builddir/build/BUILD + rm -rf /builddir/build/BUILD/pc-ble-driver-py-0.17.0-SPECPARTS + rm -rf pc-ble-driver-py-0.17.0 pc-ble-driver-py-0.17.0.gemspec + RPM_EC=0 ++ jobs -p + exit 0 Finish: rpmbuild pc-ble-driver-py-0.17.0-1.fc40.src.rpm Finish: build phase for pc-ble-driver-py-0.17.0-1.fc40.src.rpm INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-40-x86_64-1731315110.058861/root/var/log/dnf5.log INFO: chroot_scan: creating tarball /var/lib/copr-rpmbuild/results/chroot_scan.tar.gz /bin/tar: Removing leading `/' from member names INFO: Done(/var/lib/copr-rpmbuild/results/pc-ble-driver-py-0.17.0-1.fc40.src.rpm) Config(child) 0 minutes 8 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool Package info: { "packages": [ { "name": "pc-ble-driver-py", "epoch": null, "version": "0.17.0", "release": "1.fc40", "arch": "src" }, { "name": "python3-pc-ble-driver-py", "epoch": null, "version": "0.17.0", "release": "1.fc40", "arch": "noarch" } ] } RPMResults finished