Warning: Permanently added '2620:52:3:1:dead:beef:cafe:c1d4' (ED25519) to the list of known hosts. cmd: ['copr-distgit-client', 'sources'] cwd: /var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver rc: 0 stdout: stderr: INFO: Reading stdout from command: git rev-parse --abbrev-ref HEAD INFO: Reading stdout from command: git rev-parse HEAD INFO: Reading sources specification file: sources INFO: Downloading XStatic-FileSaver-1.3.2.0.tar.gz INFO: Reading stdout from command: curl --help all INFO: Calling: curl -H Pragma: -o XStatic-FileSaver-1.3.2.0.tar.gz --location --connect-timeout 60 --retry 3 --retry-delay 10 --remote-time --show-error --fail --retry-all-errors https://copr-dist-git.fedorainfracloud.org/repo/pkgs/torsava/automatic-obsoletes/python-XStatic-FileSaver/XStatic-FileSaver-1.3.2.0.tar.gz/md5/95387ce39bd56ca62c4edf7559ed416e/XStatic-FileSaver-1.3.2.0.tar.gz % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 4885 100 4885 0 0 123k 0 --:--:-- --:--:-- --:--:-- 125k INFO: Reading stdout from command: md5sum XStatic-FileSaver-1.3.2.0.tar.gz Running (timeout=18000): unbuffer mock --spec /var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver/python-XStatic-FileSaver.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1717748748.394544 -r /var/lib/copr-rpmbuild/results/configs/child.cfg INFO: mock.py version 5.6 starting (python version = 3.12.1, NVR = mock-5.6-1.fc39), args: /usr/libexec/mock/mock --spec /var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver/python-XStatic-FileSaver.spec --sources /var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver --resultdir /var/lib/copr-rpmbuild/results --uniqueext 1717748748.394544 -r /var/lib/copr-rpmbuild/results/configs/child.cfg Start(bootstrap): init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish(bootstrap): init plugins Start: init plugins INFO: tmpfs initialized INFO: selinux enabled INFO: chroot_scan: initialized INFO: compress_logs: initialized Finish: init plugins INFO: Signal handler active Start: run INFO: Start(/var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver/python-XStatic-FileSaver.spec) Config(fedora-rawhide-x86_64) Start: clean chroot Finish: clean chroot Mock Version: 5.6 INFO: Mock Version: 5.6 Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1717748748.394544/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata INFO: Guessed host environment type: unknown INFO: Using bootstrap image: registry.fedoraproject.org/fedora:rawhide INFO: Pulling image: registry.fedoraproject.org/fedora:rawhide INFO: Copy content of container registry.fedoraproject.org/fedora:rawhide to /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1717748748.394544/root INFO: Checking that registry.fedoraproject.org/fedora:rawhide image matches host's architecture INFO: mounting registry.fedoraproject.org/fedora:rawhide with podman image mount INFO: image registry.fedoraproject.org/fedora:rawhide as /var/lib/containers/storage/overlay/bfd31b88a3ee59f12df8526d0a449471c7a96d95e83b9215dba5b474fb7d065e/merged INFO: umounting image registry.fedoraproject.org/fedora:rawhide (/var/lib/containers/storage/overlay/bfd31b88a3ee59f12df8526d0a449471c7a96d95e83b9215dba5b474fb7d065e/merged) with podman image umount INFO: Package manager dnf5 detected and used (fallback) INFO: Bootstrap image not marked ready Start(bootstrap): installing dnf5 tooling Updating and loading repositories: Copr repository 100% | 2.8 MiB/s | 4.1 MiB | 00m01s fedora 100% | 2.7 MiB/s | 21.1 MiB | 00m08s Repositories loaded. Package "dnf5-5.2.3.0-1.fc41.x86_64" is already installed. Package Arch Version Repository Size Installing: dnf5-plugins x86_64 5.2.3.0-1.fc41 fedora 1.0 MiB Installing dependencies: elfutils-default-yama-scope noarch 0.191-7.fc41 fedora 1.8 KiB elfutils-libelf x86_64 0.191-7.fc41 fedora 1.2 MiB elfutils-libs x86_64 0.191-7.fc41 fedora 646.1 KiB file-libs x86_64 5.45-5.fc41 fedora 9.9 MiB libgomp x86_64 14.1.1-4.fc41 fedora 519.5 KiB rpm-build-libs x86_64 4.19.91-8.fc41 copr_base 206.6 KiB Transaction Summary: Installing: 7 packages Total size of inbound packages is 2 MiB. Need to download 2 MiB. After this operation 13 MiB will be used (install 13 MiB, remove 0 B). [1/7] rpm-build-libs-0:4.19.91-8.fc41.x 100% | 2.2 MiB/s | 98.9 KiB | 00m00s [2/7] elfutils-libelf-0:0.191-7.fc41.x8 100% | 2.1 MiB/s | 208.5 KiB | 00m00s [3/7] dnf5-plugins-0:5.2.3.0-1.fc41.x86 100% | 3.1 MiB/s | 367.0 KiB | 00m00s [4/7] elfutils-default-yama-scope-0:0.1 100% | 953.5 KiB/s | 13.3 KiB | 00m00s [5/7] libgomp-0:14.1.1-4.fc41.x86_64 100% | 6.6 MiB/s | 349.5 KiB | 00m00s [6/7] elfutils-libs-0:0.191-7.fc41.x86_ 100% | 2.3 MiB/s | 258.1 KiB | 00m00s [7/7] file-libs-0:5.45-5.fc41.x86_64 100% | 7.1 MiB/s | 763.0 KiB | 00m00s -------------------------------------------------------------------------------- [7/7] Total 100% | 7.8 MiB/s | 2.0 MiB | 00m00s Running transaction [1/9] Verify package files 100% | 777.0 B/s | 7.0 B | 00m00s [2/9] Prepare transaction 100% | 538.0 B/s | 7.0 B | 00m00s [3/9] Installing elfutils-libelf-0:0.19 100% | 194.9 MiB/s | 1.2 MiB | 00m00s [4/9] Installing file-libs-0:5.45-5.fc4 100% | 413.8 MiB/s | 9.9 MiB | 00m00s [5/9] Installing elfutils-default-yama- 100% | 185.7 KiB/s | 2.0 KiB | 00m00s >>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.191-7.fc41.n >>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.191-7.fc41.noar [6/9] Installing elfutils-libs-0:0.191- 100% | 158.2 MiB/s | 648.0 KiB | 00m00s [7/9] Installing libgomp-0:14.1.1-4.fc4 100% | 169.6 MiB/s | 520.9 KiB | 00m00s [8/9] Installing rpm-build-libs-0:4.19. 100% | 101.3 MiB/s | 207.5 KiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [9/9] Installing dnf5-plugins-0:5.2.3.0 100% | 29.2 MiB/s | 1.0 MiB | 00m00s >>> Running trigger-install scriptlet: glibc-common-0:2.39.9000-18.fc41.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39.9000-18.fc41.x86_64 Warning: skipped PGP checks for 1 package from repository: copr_base Finish(bootstrap): installing dnf5 tooling Start(bootstrap): creating root cache Finish(bootstrap): creating root cache Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1717748748.394544/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Package manager dnf5 detected and used (direct choice) INFO: Buildroot is handled by package management downloaded with a bootstrap image: rpm-4.19.91-8.fc41.x86_64 rpm-sequoia-1.6.0-3.fc41.x86_64 dnf5-5.2.3.0-1.fc41.x86_64 dnf5-plugins-5.2.3.0-1.fc41.x86_64 Start: installing minimal buildroot with dnf5 Updating and loading repositories: fedora 100% | 10.4 MiB/s | 21.1 MiB | 00m02s Copr repository 100% | 24.8 MiB/s | 4.1 MiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing group/module packages: bash x86_64 5.2.26-3.fc40 fedora 8.1 MiB bzip2 x86_64 1.0.8-18.fc40 fedora 91.7 KiB coreutils x86_64 9.5-2.fc41 fedora 5.5 MiB cpio x86_64 2.15-1.fc40 fedora 1.1 MiB diffutils x86_64 3.10-5.fc40 fedora 1.6 MiB fedora-release-common noarch 41-0.13 fedora 19.2 KiB findutils x86_64 1:4.10.0-2.fc41 fedora 1.8 MiB gawk x86_64 5.3.0-3.fc40 fedora 1.7 MiB glibc-minimal-langpack x86_64 2.39.9000-18.fc41 fedora 0.0 B grep x86_64 3.11-8.fc41 fedora 1.0 MiB gzip x86_64 1.13-1.fc40 fedora 385.0 KiB info x86_64 7.1-2.fc40 fedora 357.8 KiB patch x86_64 2.7.6-24.fc40 fedora 262.8 KiB redhat-rpm-config noarch 292-1.fc41 fedora 183.5 KiB rpm-build x86_64 4.19.91-8.fc41 copr_base 194.1 KiB sed x86_64 4.9-1.fc40 fedora 861.5 KiB shadow-utils x86_64 2:4.15.1-5.fc41 fedora 4.1 MiB tar x86_64 2:1.35-3.fc40 fedora 2.9 MiB unzip x86_64 6.0-63.fc40 fedora 382.8 KiB util-linux x86_64 2.40.1-1.fc41 copr_base 3.7 MiB which x86_64 2.21-41.fc40 fedora 80.2 KiB xz x86_64 1:5.4.6-3.fc41 fedora 2.0 MiB Installing dependencies: add-determinism-nopython x86_64 0.2.0-9.fc41 fedora 2.5 MiB alternatives x86_64 1.27-1.fc41 fedora 66.3 KiB ansible-srpm-macros noarch 1-15.fc41 fedora 35.7 KiB audit-libs x86_64 4.0.1-2.fc41 copr_base 327.3 KiB authselect x86_64 1.5.0-5.fc41 fedora 153.6 KiB authselect-libs x86_64 1.5.0-5.fc41 fedora 818.2 KiB basesystem noarch 11-20.fc40 fedora 0.0 B binutils x86_64 2.42.50-11.fc41 fedora 27.5 MiB binutils-gold x86_64 2.42.50-11.fc41 fedora 2.0 MiB build-reproducibility-srpm-macros noarch 0.2.0-9.fc41 fedora 769.0 B bzip2-libs x86_64 1.0.8-18.fc40 fedora 80.7 KiB ca-certificates noarch 2023.2.62_v7.0.401-6.fc40 fedora 2.3 MiB coreutils-common x86_64 9.5-2.fc41 fedora 11.2 MiB cracklib x86_64 2.9.11-5.fc40 fedora 238.9 KiB crypto-policies noarch 20240521-1.gitf71d135.fc41 fedora 120.0 KiB curl x86_64 8.8.0-1.fc41 fedora 743.7 KiB cyrus-sasl-lib x86_64 2.1.28-22.fc41 fedora 2.3 MiB debugedit x86_64 5.0-16.fc41 fedora 199.3 KiB dwz x86_64 0.15-6.fc40 fedora 290.9 KiB ed x86_64 1.20.2-1.fc41 fedora 146.8 KiB efi-srpm-macros noarch 5-11.fc40 fedora 40.1 KiB elfutils x86_64 0.191-7.fc41 fedora 2.5 MiB elfutils-debuginfod-client x86_64 0.191-7.fc41 fedora 64.9 KiB elfutils-default-yama-scope noarch 0.191-7.fc41 fedora 1.8 KiB elfutils-libelf x86_64 0.191-7.fc41 fedora 1.2 MiB elfutils-libs x86_64 0.191-7.fc41 fedora 646.1 KiB fedora-gpg-keys noarch 41-0.2 fedora 124.7 KiB fedora-release noarch 41-0.13 fedora 0.0 B fedora-release-identity-basic noarch 41-0.13 fedora 694.0 B fedora-repos noarch 41-0.2 fedora 4.9 KiB fedora-repos-rawhide noarch 41-0.2 fedora 2.2 KiB file x86_64 5.45-5.fc41 fedora 103.5 KiB file-libs x86_64 5.45-5.fc41 fedora 9.9 MiB filesystem x86_64 3.18-9.fc41 fedora 106.0 B fonts-srpm-macros noarch 1:2.0.5-14.fc40 fedora 55.3 KiB forge-srpm-macros noarch 0.3.1-1.fc41 fedora 39.0 KiB fpc-srpm-macros noarch 1.3-12.fc40 fedora 144.0 B gdb-minimal x86_64 14.2-9.fc41 fedora 12.7 MiB gdbm x86_64 1:1.23-6.fc40 fedora 460.9 KiB gdbm-libs x86_64 1:1.23-6.fc40 fedora 121.9 KiB ghc-srpm-macros noarch 1.9.1-1.fc41 fedora 747.0 B glibc x86_64 2.39.9000-18.fc41 fedora 6.7 MiB glibc-common x86_64 2.39.9000-18.fc41 fedora 1.0 MiB glibc-gconv-extra x86_64 2.39.9000-18.fc41 fedora 7.8 MiB gmp x86_64 1:6.3.0-1.fc41 fedora 803.4 KiB gnat-srpm-macros noarch 6-5.fc40 fedora 1.0 KiB go-srpm-macros noarch 3.6.0-1.fc41 fedora 60.8 KiB jansson x86_64 2.13.1-9.fc40 fedora 88.3 KiB kernel-srpm-macros noarch 1.0-23.fc41 fedora 1.9 KiB keyutils-libs x86_64 1.6.3-3.fc40 fedora 54.4 KiB krb5-libs x86_64 1.21.2-5.fc40 fedora 2.3 MiB libacl x86_64 2.3.2-1.fc40 fedora 40.0 KiB libarchive x86_64 3.7.4-1.fc41 fedora 914.6 KiB libattr x86_64 2.5.2-3.fc40 fedora 28.5 KiB libblkid x86_64 2.40.1-1.fc41 copr_base 258.5 KiB libbrotli x86_64 1.1.0-3.fc40 copr_base 829.5 KiB libcap x86_64 2.70-1.fc41 fedora 220.3 KiB libcap-ng x86_64 0.8.5-2.fc41 copr_base 69.2 KiB libcom_err x86_64 1.47.0-5.fc40 fedora 67.2 KiB libcurl x86_64 8.8.0-1.fc41 fedora 805.7 KiB libeconf x86_64 0.6.2-2.fc41 fedora 58.0 KiB libevent x86_64 2.1.12-13.fc41 fedora 895.6 KiB libfdisk x86_64 2.40.1-1.fc41 copr_base 362.9 KiB libffi x86_64 3.4.6-1.fc41 fedora 82.4 KiB libgcc x86_64 14.1.1-4.fc41 fedora 270.6 KiB libgomp x86_64 14.1.1-4.fc41 fedora 519.5 KiB libidn2 x86_64 2.3.7-1.fc40 fedora 329.1 KiB libmount x86_64 2.40.1-1.fc41 copr_base 351.8 KiB libnghttp2 x86_64 1.62.0-1.fc41 fedora 166.1 KiB libnsl2 x86_64 2.0.1-1.fc40 fedora 57.9 KiB libpkgconf x86_64 2.1.1-1.fc41 fedora 74.2 KiB libpsl x86_64 0.21.5-3.fc40 fedora 80.5 KiB libpwquality x86_64 1.4.5-9.fc40 copr_base 417.8 KiB libselinux x86_64 3.6-5.fc41 copr_base 177.0 KiB libsemanage x86_64 3.6-3.fc41 copr_base 293.5 KiB libsepol x86_64 3.6-3.fc40 fedora 802.0 KiB libsmartcols x86_64 2.40.1-1.fc41 copr_base 180.4 KiB libssh x86_64 0.10.6-6.fc41 fedora 513.3 KiB libssh-config noarch 0.10.6-6.fc41 fedora 277.0 B libstdc++ x86_64 14.1.1-4.fc41 fedora 2.8 MiB libtasn1 x86_64 4.19.0-6.fc40 fedora 175.7 KiB libtirpc x86_64 1.3.4-1.rc3.fc41 fedora 202.8 KiB libtool-ltdl x86_64 2.4.7-11.fc41 fedora 66.1 KiB libunistring x86_64 1.1-7.fc41 fedora 1.7 MiB libutempter x86_64 1.2.1-13.fc40 fedora 57.7 KiB libuuid x86_64 2.40.1-1.fc41 copr_base 37.4 KiB libverto x86_64 0.3.2-8.fc40 fedora 29.5 KiB libxcrypt x86_64 4.4.36-5.fc40 fedora 262.8 KiB libxml2 x86_64 2.12.7-1.fc41 copr_base 1.7 MiB libzstd x86_64 1.5.6-1.fc41 fedora 787.9 KiB lua-libs x86_64 5.4.6-5.fc40 fedora 281.1 KiB lua-srpm-macros noarch 1-13.fc40 fedora 1.3 KiB lz4-libs x86_64 1.9.4-6.fc40 fedora 129.4 KiB mpfr x86_64 4.2.1-4.fc41 fedora 828.0 KiB ncurses-base noarch 6.4-12.20240127.fc40 fedora 326.2 KiB ncurses-libs x86_64 6.4-12.20240127.fc40 fedora 963.2 KiB ocaml-srpm-macros noarch 10-2.fc41 fedora 1.9 KiB openblas-srpm-macros noarch 2-17.fc41 fedora 112.0 B openldap x86_64 2.6.8-1.fc41 fedora 636.3 KiB openssl-libs x86_64 1:3.2.1-10.fc41 fedora 7.8 MiB p11-kit x86_64 0.25.3-4.fc40 fedora 2.2 MiB p11-kit-trust x86_64 0.25.3-4.fc40 fedora 391.4 KiB package-notes-srpm-macros noarch 0.5-11.fc40 fedora 1.6 KiB pam x86_64 1.6.1-3.fc41 fedora 1.8 MiB pam-libs x86_64 1.6.1-3.fc41 fedora 135.0 KiB pcre2 x86_64 10.43-2.fc41.1 fedora 653.5 KiB pcre2-syntax noarch 10.43-2.fc41.1 fedora 249.0 KiB perl-srpm-macros noarch 1-53.fc40 fedora 861.0 B pkgconf x86_64 2.1.1-1.fc41 fedora 82.9 KiB pkgconf-m4 noarch 2.1.1-1.fc41 fedora 13.9 KiB pkgconf-pkg-config x86_64 2.1.1-1.fc41 fedora 989.0 B popt x86_64 1.19-6.fc40 fedora 136.9 KiB publicsuffix-list-dafsa noarch 20240107-3.fc40 fedora 67.5 KiB pyproject-srpm-macros noarch 1.12.1-1.fc41 fedora 1.5 KiB python-srpm-macros noarch 3.12-9.fc41 fedora 50.5 KiB qt5-srpm-macros noarch 5.15.14-1.fc41 fedora 500.0 B qt6-srpm-macros noarch 6.7.1-1.fc41 fedora 456.0 B readline x86_64 8.2-8.fc40 fedora 489.2 KiB rpm x86_64 4.19.91-8.fc41 copr_base 3.0 MiB rpm-build-libs x86_64 4.19.91-8.fc41 copr_base 206.6 KiB rpm-libs x86_64 4.19.91-8.fc41 copr_base 713.9 KiB rpm-sequoia x86_64 1.6.0-3.fc41 fedora 2.2 MiB rust-srpm-macros noarch 26.3-1.fc41 copr_base 4.8 KiB setup noarch 2.15.0-3.fc41 fedora 720.7 KiB sqlite-libs x86_64 3.46.0-1.fc41 fedora 1.4 MiB systemd-libs x86_64 256~rc3-4.fc41 fedora 2.0 MiB util-linux-core x86_64 2.40.1-1.fc41 copr_base 1.5 MiB xxhash-libs x86_64 0.8.2-2.fc40 fedora 88.5 KiB xz-libs x86_64 1:5.4.6-3.fc41 fedora 209.8 KiB zig-srpm-macros noarch 1-2.fc40 fedora 1.1 KiB zip x86_64 3.0-40.fc40 fedora 703.2 KiB zlib-ng-compat x86_64 2.1.6-6.fc41 fedora 134.0 KiB zstd x86_64 1.5.6-1.fc41 fedora 1.7 MiB Installing groups: Buildsystem building group Transaction Summary: Installing: 155 packages Total size of inbound packages is 54 MiB. Need to download 54 MiB. After this operation 182 MiB will be used (install 182 MiB, remove 0 B). [ 1/155] bzip2-0:1.0.8-18.fc40.x86_64 100% | 1.3 MiB/s | 52.4 KiB | 00m00s [ 2/155] cpio-0:2.15-1.fc40.x86_64 100% | 2.6 MiB/s | 292.2 KiB | 00m00s [ 3/155] coreutils-0:9.5-2.fc41.x86_64 100% | 5.2 MiB/s | 1.1 MiB | 00m00s [ 4/155] fedora-release-common-0:41-0. 100% | 2.4 MiB/s | 22.1 KiB | 00m00s [ 5/155] diffutils-0:3.10-5.fc40.x86_6 100% | 5.0 MiB/s | 405.5 KiB | 00m00s [ 6/155] glibc-minimal-langpack-0:2.39 100% | 5.5 MiB/s | 111.6 KiB | 00m00s [ 7/155] bash-0:5.2.26-3.fc40.x86_64 100% | 6.9 MiB/s | 1.8 MiB | 00m00s [ 8/155] gzip-0:1.13-1.fc40.x86_64 100% | 8.8 MiB/s | 170.6 KiB | 00m00s [ 9/155] findutils-1:4.10.0-2.fc41.x86 100% | 7.9 MiB/s | 548.3 KiB | 00m00s [ 10/155] info-0:7.1-2.fc40.x86_64 100% | 6.6 MiB/s | 182.3 KiB | 00m00s [ 11/155] patch-0:2.7.6-24.fc40.x86_64 100% | 6.4 MiB/s | 130.7 KiB | 00m00s [ 12/155] grep-0:3.11-8.fc41.x86_64 100% | 4.6 MiB/s | 299.3 KiB | 00m00s [ 13/155] redhat-rpm-config-0:292-1.fc4 100% | 8.0 MiB/s | 82.1 KiB | 00m00s [ 14/155] sed-0:4.9-1.fc40.x86_64 100% | 4.4 MiB/s | 318.2 KiB | 00m00s [ 15/155] unzip-0:6.0-63.fc40.x86_64 100% | 6.4 MiB/s | 184.5 KiB | 00m00s [ 16/155] which-0:2.21-41.fc40.x86_64 100% | 3.4 MiB/s | 41.4 KiB | 00m00s [ 17/155] tar-2:1.35-3.fc40.x86_64 100% | 7.0 MiB/s | 856.6 KiB | 00m00s [ 18/155] xz-1:5.4.6-3.fc41.x86_64 100% | 2.4 MiB/s | 557.5 KiB | 00m00s [ 19/155] rpm-build-0:4.19.91-8.fc41.x8 100% | 869.6 KiB/s | 75.7 KiB | 00m00s [ 20/155] util-linux-0:2.40.1-1.fc41.x8 100% | 7.3 MiB/s | 1.2 MiB | 00m00s [ 21/155] shadow-utils-2:4.15.1-5.fc41. 100% | 1.5 MiB/s | 1.3 MiB | 00m01s [ 22/155] filesystem-0:3.18-9.fc41.x86_ 100% | 2.6 MiB/s | 1.1 MiB | 00m00s [ 23/155] gawk-0:5.3.0-3.fc40.x86_64 100% | 1.1 MiB/s | 1.1 MiB | 00m01s [ 24/155] bzip2-libs-0:1.0.8-18.fc40.x8 100% | 2.1 MiB/s | 40.9 KiB | 00m00s [ 25/155] ncurses-libs-0:6.4-12.2024012 100% | 3.7 MiB/s | 332.5 KiB | 00m00s [ 26/155] libacl-0:2.3.2-1.fc40.x86_64 100% | 2.2 MiB/s | 24.4 KiB | 00m00s [ 27/155] libattr-0:2.5.2-3.fc40.x86_64 100% | 2.0 MiB/s | 18.0 KiB | 00m00s [ 28/155] libcap-0:2.70-1.fc41.x86_64 100% | 4.2 MiB/s | 86.2 KiB | 00m00s [ 29/155] glibc-0:2.39.9000-18.fc41.x86 100% | 3.5 MiB/s | 2.2 MiB | 00m01s [ 30/155] openssl-libs-1:3.2.1-10.fc41. 100% | 5.5 MiB/s | 2.3 MiB | 00m00s [ 31/155] fedora-repos-0:41-0.2.noarch 100% | 1.0 MiB/s | 9.3 KiB | 00m00s [ 32/155] pcre2-0:10.43-2.fc41.1.x86_64 100% | 5.6 MiB/s | 242.1 KiB | 00m00s [ 33/155] ed-0:1.20.2-1.fc41.x86_64 100% | 4.2 MiB/s | 81.9 KiB | 00m00s [ 34/155] glibc-common-0:2.39.9000-18.f 100% | 5.2 MiB/s | 399.0 KiB | 00m00s [ 35/155] ansible-srpm-macros-0:1-15.fc 100% | 2.3 MiB/s | 20.9 KiB | 00m00s [ 36/155] build-reproducibility-srpm-ma 100% | 1.0 MiB/s | 9.1 KiB | 00m00s [ 37/155] efi-srpm-macros-0:5-11.fc40.n 100% | 2.0 MiB/s | 22.3 KiB | 00m00s [ 38/155] fonts-srpm-macros-1:2.0.5-14. 100% | 2.4 MiB/s | 26.5 KiB | 00m00s [ 39/155] dwz-0:0.15-6.fc40.x86_64 100% | 3.8 MiB/s | 137.8 KiB | 00m00s [ 40/155] forge-srpm-macros-0:0.3.1-1.f 100% | 2.1 MiB/s | 19.4 KiB | 00m00s [ 41/155] fpc-srpm-macros-0:1.3-12.fc40 100% | 870.3 KiB/s | 7.8 KiB | 00m00s [ 42/155] ghc-srpm-macros-0:1.9.1-1.fc4 100% | 896.9 KiB/s | 9.0 KiB | 00m00s [ 43/155] gnat-srpm-macros-0:6-5.fc40.n 100% | 980.4 KiB/s | 8.8 KiB | 00m00s [ 44/155] go-srpm-macros-0:3.6.0-1.fc41 100% | 2.7 MiB/s | 27.9 KiB | 00m00s [ 45/155] coreutils-common-0:9.5-2.fc41 100% | 3.4 MiB/s | 2.1 MiB | 00m01s [ 46/155] kernel-srpm-macros-0:1.0-23.f 100% | 887.6 KiB/s | 9.8 KiB | 00m00s [ 47/155] lua-srpm-macros-0:1-13.fc40.n 100% | 793.7 KiB/s | 8.7 KiB | 00m00s [ 48/155] ocaml-srpm-macros-0:10-2.fc41 100% | 828.2 KiB/s | 9.1 KiB | 00m00s [ 49/155] openblas-srpm-macros-0:2-17.f 100% | 696.4 KiB/s | 7.7 KiB | 00m00s [ 50/155] package-notes-srpm-macros-0:0 100% | 1.1 MiB/s | 9.9 KiB | 00m00s [ 51/155] perl-srpm-macros-0:1-53.fc40. 100% | 931.3 KiB/s | 8.4 KiB | 00m00s [ 52/155] pyproject-srpm-macros-0:1.12. 100% | 1.4 MiB/s | 12.9 KiB | 00m00s [ 53/155] qt5-srpm-macros-0:5.15.14-1.f 100% | 886.1 KiB/s | 8.9 KiB | 00m00s [ 54/155] qt6-srpm-macros-0:6.7.1-1.fc4 100% | 986.3 KiB/s | 8.9 KiB | 00m00s [ 55/155] python-srpm-macros-0:3.12-9.f 100% | 1.2 MiB/s | 24.0 KiB | 00m00s [ 56/155] libeconf-0:0.6.2-2.fc41.x86_6 100% | 3.1 MiB/s | 32.0 KiB | 00m00s [ 57/155] zig-srpm-macros-0:1-2.fc40.no 100% | 472.9 KiB/s | 8.0 KiB | 00m00s [ 58/155] libxcrypt-0:4.4.36-5.fc40.x86 100% | 5.8 MiB/s | 118.1 KiB | 00m00s [ 59/155] pam-libs-0:1.6.1-3.fc41.x86_6 100% | 2.3 MiB/s | 57.1 KiB | 00m00s [ 60/155] zip-0:3.0-40.fc40.x86_64 100% | 4.5 MiB/s | 264.8 KiB | 00m00s [ 61/155] xz-libs-1:5.4.6-3.fc41.x86_64 100% | 4.5 MiB/s | 110.2 KiB | 00m00s [ 62/155] setup-0:2.15.0-3.fc41.noarch 100% | 3.9 MiB/s | 154.5 KiB | 00m00s [ 63/155] debugedit-0:5.0-16.fc41.x86_6 100% | 3.2 MiB/s | 79.7 KiB | 00m00s [ 64/155] readline-0:8.2-8.fc40.x86_64 100% | 4.6 MiB/s | 213.3 KiB | 00m00s [ 65/155] mpfr-0:4.2.1-4.fc41.x86_64 100% | 5.4 MiB/s | 345.2 KiB | 00m00s [ 66/155] elfutils-libelf-0:0.191-7.fc4 100% | 2.5 MiB/s | 208.5 KiB | 00m00s [ 67/155] popt-0:1.19-6.fc40.x86_64 100% | 1.8 MiB/s | 66.7 KiB | 00m00s [ 68/155] libarchive-0:3.7.4-1.fc41.x86 100% | 2.0 MiB/s | 407.6 KiB | 00m00s [ 69/155] libutempter-0:1.2.1-13.fc40.x 100% | 2.6 MiB/s | 26.4 KiB | 00m00s [ 70/155] elfutils-0:0.191-7.fc41.x86_6 100% | 2.2 MiB/s | 530.0 KiB | 00m00s [ 71/155] zlib-ng-compat-0:2.1.6-6.fc41 100% | 1.1 MiB/s | 77.4 KiB | 00m00s [ 72/155] zstd-0:1.5.6-1.fc41.x86_64 100% | 1.6 MiB/s | 479.3 KiB | 00m00s [ 73/155] basesystem-0:11-20.fc40.noarc 100% | 798.7 KiB/s | 7.2 KiB | 00m00s [ 74/155] libgcc-0:14.1.1-4.fc41.x86_64 100% | 1.7 MiB/s | 128.5 KiB | 00m00s [ 75/155] ncurses-base-0:6.4-12.2024012 100% | 1.5 MiB/s | 88.9 KiB | 00m00s [ 76/155] systemd-libs-0:256~rc3-4.fc41 100% | 1.8 MiB/s | 727.5 KiB | 00m00s [ 77/155] crypto-policies-0:20240521-1. 100% | 1.8 MiB/s | 90.0 KiB | 00m00s [ 78/155] fedora-gpg-keys-0:41-0.2.noar 100% | 3.1 MiB/s | 131.8 KiB | 00m00s [ 79/155] fedora-repos-rawhide-0:41-0.2 100% | 809.6 KiB/s | 8.9 KiB | 00m00s [ 80/155] pcre2-syntax-0:10.43-2.fc41.1 100% | 2.9 MiB/s | 148.9 KiB | 00m00s [ 81/155] ca-certificates-0:2023.2.62_v 100% | 2.7 MiB/s | 862.1 KiB | 00m00s [ 82/155] elfutils-libs-0:0.191-7.fc41. 100% | 2.2 MiB/s | 258.1 KiB | 00m00s [ 83/155] elfutils-debuginfod-client-0: 100% | 2.2 MiB/s | 38.2 KiB | 00m00s [ 84/155] glibc-gconv-extra-0:2.39.9000 100% | 2.1 MiB/s | 1.7 MiB | 00m01s [ 85/155] add-determinism-nopython-0:0. 100% | 2.2 MiB/s | 890.6 KiB | 00m00s [ 86/155] libstdc++-0:14.1.1-4.fc41.x86 100% | 4.7 MiB/s | 883.7 KiB | 00m00s [ 87/155] libzstd-0:1.5.6-1.fc41.x86_64 100% | 3.8 MiB/s | 308.9 KiB | 00m00s [ 88/155] elfutils-default-yama-scope-0 100% | 1.0 MiB/s | 13.3 KiB | 00m00s [ 89/155] audit-libs-0:4.0.1-2.fc41.x86 100% | 11.2 MiB/s | 125.8 KiB | 00m00s [ 90/155] lz4-libs-0:1.9.4-6.fc40.x86_6 100% | 2.2 MiB/s | 67.2 KiB | 00m00s [ 91/155] libblkid-0:2.40.1-1.fc41.x86_ 100% | 10.2 MiB/s | 124.8 KiB | 00m00s [ 92/155] libcap-ng-0:0.8.5-2.fc41.x86_ 100% | 4.0 MiB/s | 33.0 KiB | 00m00s [ 93/155] authselect-libs-0:1.5.0-5.fc4 100% | 5.1 MiB/s | 218.6 KiB | 00m00s [ 94/155] gdbm-libs-1:1.23-6.fc40.x86_6 100% | 5.5 MiB/s | 56.2 KiB | 00m00s [ 95/155] authselect-0:1.5.0-5.fc41.x86 100% | 3.6 MiB/s | 146.2 KiB | 00m00s [ 96/155] libnsl2-0:2.0.1-1.fc40.x86_64 100% | 2.6 MiB/s | 29.6 KiB | 00m00s [ 97/155] libtirpc-0:1.3.4-1.rc3.fc41.x 100% | 3.2 MiB/s | 92.5 KiB | 00m00s [ 98/155] libcom_err-0:1.47.0-5.fc40.x8 100% | 2.8 MiB/s | 25.4 KiB | 00m00s [ 99/155] keyutils-libs-0:1.6.3-3.fc40. 100% | 3.4 MiB/s | 31.5 KiB | 00m00s [100/155] libverto-0:0.3.2-8.fc40.x86_6 100% | 2.0 MiB/s | 20.5 KiB | 00m00s [101/155] libfdisk-0:2.40.1-1.fc41.x86_ 100% | 12.0 MiB/s | 159.7 KiB | 00m00s [102/155] libmount-0:2.40.1-1.fc41.x86_ 100% | 13.8 MiB/s | 155.2 KiB | 00m00s [103/155] libselinux-0:3.6-5.fc41.x86_6 100% | 8.6 MiB/s | 87.7 KiB | 00m00s [104/155] krb5-libs-0:1.21.2-5.fc40.x86 100% | 5.6 MiB/s | 756.1 KiB | 00m00s [105/155] pam-0:1.6.1-3.fc41.x86_64 100% | 2.9 MiB/s | 553.6 KiB | 00m00s [106/155] alternatives-0:1.27-1.fc41.x8 100% | 2.1 MiB/s | 40.7 KiB | 00m00s [107/155] libsepol-0:3.6-3.fc40.x86_64 100% | 4.1 MiB/s | 340.1 KiB | 00m00s [108/155] jansson-0:2.13.1-9.fc40.x86_6 100% | 4.3 MiB/s | 44.2 KiB | 00m00s [109/155] libsmartcols-0:2.40.1-1.fc41. 100% | 9.1 MiB/s | 83.8 KiB | 00m00s [110/155] libuuid-0:2.40.1-1.fc41.x86_6 100% | 3.1 MiB/s | 29.0 KiB | 00m00s [111/155] util-linux-core-0:2.40.1-1.fc 100% | 28.3 MiB/s | 520.9 KiB | 00m00s [112/155] file-0:5.45-5.fc41.x86_64 100% | 4.8 MiB/s | 49.1 KiB | 00m00s [113/155] binutils-gold-0:2.42.50-11.fc 100% | 4.3 MiB/s | 783.1 KiB | 00m00s [114/155] pkgconf-pkg-config-0:2.1.1-1. 100% | 988.0 KiB/s | 9.9 KiB | 00m00s [115/155] pkgconf-0:2.1.1-1.fc41.x86_64 100% | 2.1 MiB/s | 43.9 KiB | 00m00s [116/155] file-libs-0:5.45-5.fc41.x86_6 100% | 5.3 MiB/s | 763.0 KiB | 00m00s [117/155] pkgconf-m4-0:2.1.1-1.fc41.noa 100% | 1.5 MiB/s | 14.1 KiB | 00m00s [118/155] libpkgconf-0:2.1.1-1.fc41.x86 100% | 3.7 MiB/s | 38.0 KiB | 00m00s [119/155] rpm-0:4.19.91-8.fc41.x86_64 100% | 32.0 MiB/s | 524.2 KiB | 00m00s [120/155] rpm-build-libs-0:4.19.91-8.fc 100% | 8.0 MiB/s | 98.9 KiB | 00m00s [121/155] libgomp-0:14.1.1-4.fc41.x86_6 100% | 5.8 MiB/s | 349.5 KiB | 00m00s [122/155] curl-0:8.8.0-1.fc41.x86_64 100% | 3.2 MiB/s | 301.5 KiB | 00m00s [123/155] rpm-libs-0:4.19.91-8.fc41.x86 100% | 25.1 MiB/s | 309.0 KiB | 00m00s [124/155] lua-libs-0:5.4.6-5.fc40.x86_6 100% | 3.4 MiB/s | 131.9 KiB | 00m00s [125/155] sqlite-libs-0:3.46.0-1.fc41.x 100% | 5.5 MiB/s | 710.6 KiB | 00m00s [126/155] libsemanage-0:3.6-3.fc41.x86_ 100% | 12.7 MiB/s | 116.8 KiB | 00m00s [127/155] rust-srpm-macros-0:26.3-1.fc4 100% | 1.6 MiB/s | 13.1 KiB | 00m00s [128/155] gdbm-1:1.23-6.fc40.x86_64 100% | 5.1 MiB/s | 152.5 KiB | 00m00s [129/155] rpm-sequoia-0:1.6.0-3.fc41.x8 100% | 4.3 MiB/s | 846.1 KiB | 00m00s [130/155] libpwquality-0:1.4.5-9.fc40.x 100% | 10.6 MiB/s | 108.8 KiB | 00m00s [131/155] libxml2-0:2.12.7-1.fc41.x86_6 100% | 44.6 MiB/s | 685.7 KiB | 00m00s [132/155] cracklib-0:2.9.11-5.fc40.x86_ 100% | 3.6 MiB/s | 92.5 KiB | 00m00s [133/155] libffi-0:3.4.6-1.fc41.x86_64 100% | 3.9 MiB/s | 40.0 KiB | 00m00s [134/155] libtasn1-0:4.19.0-6.fc40.x86_ 100% | 5.1 MiB/s | 73.7 KiB | 00m00s [135/155] p11-kit-trust-0:0.25.3-4.fc40 100% | 5.8 MiB/s | 131.5 KiB | 00m00s [136/155] p11-kit-0:0.25.3-4.fc40.x86_6 100% | 5.0 MiB/s | 489.8 KiB | 00m00s [137/155] xxhash-libs-0:0.8.2-2.fc40.x8 100% | 3.3 MiB/s | 36.9 KiB | 00m00s [138/155] fedora-release-0:41-0.13.noar 100% | 1.1 MiB/s | 11.3 KiB | 00m00s [139/155] gmp-1:6.3.0-1.fc41.x86_64 100% | 3.1 MiB/s | 316.8 KiB | 00m00s [140/155] fedora-release-identity-basic 100% | 1.3 MiB/s | 12.1 KiB | 00m00s [141/155] libcurl-0:8.8.0-1.fc41.x86_64 100% | 5.5 MiB/s | 355.3 KiB | 00m00s [142/155] libidn2-0:2.3.7-1.fc40.x86_64 100% | 5.0 MiB/s | 118.7 KiB | 00m00s [143/155] libnghttp2-0:1.62.0-1.fc41.x8 100% | 3.4 MiB/s | 76.5 KiB | 00m00s [144/155] libpsl-0:0.21.5-3.fc40.x86_64 100% | 5.2 MiB/s | 63.9 KiB | 00m00s [145/155] libssh-0:0.10.6-6.fc41.x86_64 100% | 5.6 MiB/s | 211.5 KiB | 00m00s [146/155] openldap-0:2.6.8-1.fc41.x86_6 100% | 5.0 MiB/s | 254.4 KiB | 00m00s [147/155] binutils-0:2.42.50-11.fc41.x8 100% | 5.9 MiB/s | 6.4 MiB | 00m01s [148/155] publicsuffix-list-dafsa-0:202 100% | 4.7 MiB/s | 58.1 KiB | 00m00s [149/155] libssh-config-0:0.10.6-6.fc41 100% | 830.6 KiB/s | 9.1 KiB | 00m00s [150/155] libunistring-0:1.1-7.fc41.x86 100% | 5.9 MiB/s | 545.4 KiB | 00m00s [151/155] libevent-0:2.1.12-13.fc41.x86 100% | 5.5 MiB/s | 257.2 KiB | 00m00s [152/155] libtool-ltdl-0:2.4.7-11.fc41. 100% | 2.9 MiB/s | 35.4 KiB | 00m00s [153/155] libbrotli-0:1.1.0-3.fc40.x86_ 100% | 27.6 MiB/s | 338.9 KiB | 00m00s [154/155] gdb-minimal-0:14.2-9.fc41.x86 100% | 7.5 MiB/s | 4.3 MiB | 00m01s [155/155] cyrus-sasl-lib-0:2.1.28-22.fc 100% | 7.1 MiB/s | 793.4 KiB | 00m00s -------------------------------------------------------------------------------- [155/155] Total 100% | 11.2 MiB/s | 53.7 MiB | 00m05s Running transaction Importing PGP key 0xE99D6AD1: Userid : "Fedora (41) " Fingerprint: 466CF2D8B60BC3057AA9453ED0622462E99D6AD1 From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-41-primary The key was successfully imported. Importing PGP key 0xE99D6AD1: Userid : "Fedora (41) " Fingerprint: 466CF2D8B60BC3057AA9453ED0622462E99D6AD1 From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-41-primary The key was successfully imported. Importing PGP key 0xA15B79CC: Userid : "Fedora (40) " Fingerprint: 115DF9AEF857853EE8445D0A0727707EA15B79CC From : file:///usr/share/distribution-gpg-keys/fedora/RPM-GPG-KEY-fedora-40-primary The key was successfully imported. [ 1/157] Verify package files 100% | 648.0 B/s | 155.0 B | 00m00s >>> Running pre-transaction scriptlet: filesystem-0:3.18-9.fc41.x86_64 >>> Stop pre-transaction scriptlet: filesystem-0:3.18-9.fc41.x86_64 [ 2/157] Prepare transaction 100% | 1.9 KiB/s | 155.0 B | 00m00s [ 3/157] Installing libgcc-0:14.1.1-4. 100% | 133.0 MiB/s | 272.3 KiB | 00m00s >>> Running post-install scriptlet: libgcc-0:14.1.1-4.fc41.x86_64 >>> Stop post-install scriptlet: libgcc-0:14.1.1-4.fc41.x86_64 [ 4/157] Installing crypto-policies-0: 100% | 15.9 MiB/s | 147.0 KiB | 00m00s >>> Running post-install scriptlet: crypto-policies-0:20240521-1.gitf71d135.fc41 >>> Stop post-install scriptlet: crypto-policies-0:20240521-1.gitf71d135.fc41.no [ 5/157] Installing libssh-config-0:0. 100% | 796.9 KiB/s | 816.0 B | 00m00s [ 6/157] Installing publicsuffix-list- 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 7/157] Installing fedora-release-ide 100% | 0.0 B/s | 952.0 B | 00m00s [ 8/157] Installing fedora-repos-rawhi 100% | 2.4 MiB/s | 2.4 KiB | 00m00s [ 9/157] Installing fedora-gpg-keys-0: 100% | 20.7 MiB/s | 169.7 KiB | 00m00s [ 10/157] Installing fedora-repos-0:41- 100% | 5.6 MiB/s | 5.7 KiB | 00m00s [ 11/157] Installing fedora-release-com 100% | 11.5 MiB/s | 23.5 KiB | 00m00s [ 12/157] Installing fedora-release-0:4 100% | 0.0 B/s | 124.0 B | 00m00s [ 13/157] Installing setup-0:2.15.0-3.f 100% | 47.3 MiB/s | 726.1 KiB | 00m00s >>> Running post-install scriptlet: setup-0:2.15.0-3.fc41.noarch >>> Stop post-install scriptlet: setup-0:2.15.0-3.fc41.noarch [ 14/157] Installing filesystem-0:3.18- 100% | 1.7 MiB/s | 212.5 KiB | 00m00s [ 15/157] Installing basesystem-0:11-20 100% | 0.0 B/s | 124.0 B | 00m00s [ 16/157] Installing rust-srpm-macros-0 100% | 0.0 B/s | 5.6 KiB | 00m00s [ 17/157] Installing pkgconf-m4-0:2.1.1 100% | 0.0 B/s | 14.3 KiB | 00m00s [ 18/157] Installing pcre2-syntax-0:10. 100% | 122.8 MiB/s | 251.5 KiB | 00m00s [ 19/157] Installing ncurses-base-0:6.4 100% | 38.2 MiB/s | 351.6 KiB | 00m00s [ 20/157] Installing glibc-minimal-lang 100% | 0.0 B/s | 124.0 B | 00m00s [ 21/157] Installing ncurses-libs-0:6.4 100% | 157.8 MiB/s | 969.7 KiB | 00m00s >>> Running pre-install scriptlet: glibc-0:2.39.9000-18.fc41.x86_64 >>> Stop pre-install scriptlet: glibc-0:2.39.9000-18.fc41.x86_64 warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [ 22/157] Installing glibc-0:2.39.9000- 100% | 143.0 MiB/s | 6.7 MiB | 00m00s >>> Running post-install scriptlet: glibc-0:2.39.9000-18.fc41.x86_64 >>> Stop post-install scriptlet: glibc-0:2.39.9000-18.fc41.x86_64 [ 23/157] Installing bash-0:5.2.26-3.fc 100% | 272.0 MiB/s | 8.2 MiB | 00m00s >>> Running post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 >>> Stop post-install scriptlet: bash-0:5.2.26-3.fc40.x86_64 [ 24/157] Installing glibc-common-0:2.3 100% | 128.4 MiB/s | 1.0 MiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [ 25/157] Installing glibc-gconv-extra- 100% | 133.3 MiB/s | 7.9 MiB | 00m00s >>> Running post-install scriptlet: glibc-gconv-extra-0:2.39.9000-18.fc41.x86_64 >>> Stop post-install scriptlet: glibc-gconv-extra-0:2.39.9000-18.fc41.x86_64 [ 26/157] Installing zlib-ng-compat-0:2 100% | 131.6 MiB/s | 134.8 KiB | 00m00s [ 27/157] Installing bzip2-libs-0:1.0.8 100% | 79.9 MiB/s | 81.8 KiB | 00m00s [ 28/157] Installing xz-libs-1:5.4.6-3. 100% | 206.0 MiB/s | 210.9 KiB | 00m00s [ 29/157] Installing readline-0:8.2-8.f 100% | 160.0 MiB/s | 491.4 KiB | 00m00s [ 30/157] Installing popt-0:1.19-6.fc40 100% | 35.0 MiB/s | 143.5 KiB | 00m00s [ 31/157] Installing libstdc++-0:14.1.1 100% | 251.1 MiB/s | 2.8 MiB | 00m00s [ 32/157] Installing libzstd-0:1.5.6-1. 100% | 256.9 MiB/s | 789.2 KiB | 00m00s [ 33/157] Installing elfutils-libelf-0: 100% | 292.3 MiB/s | 1.2 MiB | 00m00s [ 34/157] Installing libuuid-0:2.40.1-1 100% | 37.5 MiB/s | 38.4 KiB | 00m00s [ 35/157] Installing libblkid-0:2.40.1- 100% | 126.8 MiB/s | 259.7 KiB | 00m00s [ 36/157] Installing libattr-0:2.5.2-3. 100% | 28.8 MiB/s | 29.5 KiB | 00m00s [ 37/157] Installing libacl-0:2.3.2-1.f 100% | 39.9 MiB/s | 40.8 KiB | 00m00s [ 38/157] Installing libxcrypt-0:4.4.36 100% | 129.7 MiB/s | 265.5 KiB | 00m00s [ 39/157] Installing gmp-1:6.3.0-1.fc41 100% | 262.2 MiB/s | 805.6 KiB | 00m00s [ 40/157] Installing libeconf-0:0.6.2-2 100% | 58.3 MiB/s | 59.7 KiB | 00m00s [ 41/157] Installing gdbm-libs-1:1.23-6 100% | 120.7 MiB/s | 123.6 KiB | 00m00s [ 42/157] Installing mpfr-0:4.2.1-4.fc4 100% | 202.6 MiB/s | 829.7 KiB | 00m00s [ 43/157] Installing gawk-0:5.3.0-3.fc4 100% | 172.8 MiB/s | 1.7 MiB | 00m00s [ 44/157] Installing dwz-0:0.15-6.fc40. 100% | 142.7 MiB/s | 292.3 KiB | 00m00s [ 45/157] Installing unzip-0:6.0-63.fc4 100% | 125.8 MiB/s | 386.3 KiB | 00m00s [ 46/157] Installing file-libs-0:5.45-5 100% | 472.9 MiB/s | 9.9 MiB | 00m00s [ 47/157] Installing file-0:5.45-5.fc41 100% | 102.6 MiB/s | 105.0 KiB | 00m00s [ 48/157] Installing pcre2-0:10.43-2.fc 100% | 213.2 MiB/s | 654.9 KiB | 00m00s [ 49/157] Installing grep-0:3.11-8.fc41 100% | 124.9 MiB/s | 1.0 MiB | 00m00s [ 50/157] Installing xz-1:5.4.6-3.fc41. 100% | 154.0 MiB/s | 2.0 MiB | 00m00s [ 51/157] Installing lz4-libs-0:1.9.4-6 100% | 127.4 MiB/s | 130.5 KiB | 00m00s [ 52/157] Installing libcap-ng-0:0.8.5- 100% | 69.4 MiB/s | 71.0 KiB | 00m00s [ 53/157] Installing audit-libs-0:4.0.1 100% | 160.8 MiB/s | 329.3 KiB | 00m00s [ 54/157] Installing pam-libs-0:1.6.1-3 100% | 67.1 MiB/s | 137.4 KiB | 00m00s [ 55/157] Installing libcap-0:2.70-1.fc 100% | 73.3 MiB/s | 225.2 KiB | 00m00s [ 56/157] Installing systemd-libs-0:256 100% | 252.8 MiB/s | 2.0 MiB | 00m00s [ 57/157] Installing libcom_err-0:1.47. 100% | 66.7 MiB/s | 68.3 KiB | 00m00s [ 58/157] Installing libsepol-0:3.6-3.f 100% | 261.4 MiB/s | 803.0 KiB | 00m00s [ 59/157] Installing libselinux-0:3.6-5 100% | 87.0 MiB/s | 178.3 KiB | 00m00s [ 60/157] Installing sed-0:4.9-1.fc40.x 100% | 121.3 MiB/s | 869.7 KiB | 00m00s [ 61/157] Installing findutils-1:4.10.0 100% | 206.4 MiB/s | 1.9 MiB | 00m00s [ 62/157] Installing libmount-0:2.40.1- 100% | 172.3 MiB/s | 352.9 KiB | 00m00s [ 63/157] Installing alternatives-0:1.2 100% | 66.4 MiB/s | 68.0 KiB | 00m00s [ 64/157] Installing jansson-0:2.13.1-9 100% | 87.6 MiB/s | 89.7 KiB | 00m00s [ 65/157] Installing libsmartcols-0:2.4 100% | 177.3 MiB/s | 181.5 KiB | 00m00s [ 66/157] Installing lua-libs-0:5.4.6-5 100% | 137.8 MiB/s | 282.3 KiB | 00m00s [ 67/157] Installing libtasn1-0:4.19.0- 100% | 173.3 MiB/s | 177.5 KiB | 00m00s [ 68/157] Installing libunistring-0:1.1 100% | 288.5 MiB/s | 1.7 MiB | 00m00s [ 69/157] Installing libidn2-0:2.3.7-1. 100% | 81.8 MiB/s | 335.0 KiB | 00m00s [ 70/157] Installing libpsl-0:0.21.5-3. 100% | 79.7 MiB/s | 81.6 KiB | 00m00s [ 71/157] Installing util-linux-core-0: 100% | 135.0 MiB/s | 1.5 MiB | 00m00s [ 72/157] Installing tar-2:1.35-3.fc40. 100% | 227.0 MiB/s | 3.0 MiB | 00m00s [ 73/157] Installing libsemanage-0:3.6- 100% | 96.1 MiB/s | 295.3 KiB | 00m00s [ 74/157] Installing shadow-utils-2:4.1 100% | 86.9 MiB/s | 4.2 MiB | 00m00s >>> Running pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64 >>> Stop pre-install scriptlet: libutempter-0:1.2.1-13.fc40.x86_64 [ 75/157] Installing libutempter-0:1.2. 100% | 29.2 MiB/s | 59.7 KiB | 00m00s [ 76/157] Installing zstd-0:1.5.6-1.fc4 100% | 239.4 MiB/s | 1.7 MiB | 00m00s [ 77/157] Installing zip-0:3.0-40.fc40. 100% | 172.6 MiB/s | 707.1 KiB | 00m00s [ 78/157] Installing gdbm-1:1.23-6.fc40 100% | 113.7 MiB/s | 465.8 KiB | 00m00s [ 79/157] Installing cyrus-sasl-lib-0:2 100% | 254.6 MiB/s | 2.3 MiB | 00m00s [ 80/157] Installing libfdisk-0:2.40.1- 100% | 177.7 MiB/s | 363.9 KiB | 00m00s [ 81/157] Installing add-determinism-no 100% | 280.4 MiB/s | 2.5 MiB | 00m00s [ 82/157] Installing build-reproducibil 100% | 0.0 B/s | 1.0 KiB | 00m00s [ 83/157] Installing libxml2-0:2.12.7-1 100% | 242.9 MiB/s | 1.7 MiB | 00m00s [ 84/157] Installing bzip2-0:1.0.8-18.f 100% | 47.0 MiB/s | 96.2 KiB | 00m00s [ 85/157] Installing sqlite-libs-0:3.46 100% | 235.6 MiB/s | 1.4 MiB | 00m00s [ 86/157] Installing ed-0:1.20.2-1.fc41 100% | 72.8 MiB/s | 149.2 KiB | 00m00s [ 87/157] Installing patch-0:2.7.6-24.f 100% | 129.0 MiB/s | 264.3 KiB | 00m00s [ 88/157] Installing elfutils-default-y 100% | 185.7 KiB/s | 2.0 KiB | 00m00s >>> Running post-install scriptlet: elfutils-default-yama-scope-0:0.191-7.fc41.n >>> Stop post-install scriptlet: elfutils-default-yama-scope-0:0.191-7.fc41.noar [ 89/157] Installing elfutils-libs-0:0. 100% | 158.2 MiB/s | 648.0 KiB | 00m00s [ 90/157] Installing cpio-0:2.15-1.fc40 100% | 157.1 MiB/s | 1.1 MiB | 00m00s [ 91/157] Installing diffutils-0:3.10-5 100% | 176.2 MiB/s | 1.6 MiB | 00m00s [ 92/157] Installing keyutils-libs-0:1. 100% | 54.5 MiB/s | 55.8 KiB | 00m00s [ 93/157] Installing libverto-0:0.3.2-8 100% | 30.5 MiB/s | 31.3 KiB | 00m00s [ 94/157] Installing libpkgconf-0:2.1.1 100% | 73.6 MiB/s | 75.3 KiB | 00m00s [ 95/157] Installing pkgconf-0:2.1.1-1. 100% | 41.7 MiB/s | 85.4 KiB | 00m00s [ 96/157] Installing pkgconf-pkg-config 100% | 1.7 MiB/s | 1.8 KiB | 00m00s [ 97/157] Installing libgomp-0:14.1.1-4 100% | 254.4 MiB/s | 520.9 KiB | 00m00s [ 98/157] Installing libffi-0:3.4.6-1.f 100% | 81.8 MiB/s | 83.8 KiB | 00m00s [ 99/157] Installing p11-kit-0:0.25.3-4 100% | 156.7 MiB/s | 2.2 MiB | 00m00s [100/157] Installing p11-kit-trust-0:0. 100% | 27.4 MiB/s | 393.1 KiB | 00m00s >>> Running post-install scriptlet: p11-kit-trust-0:0.25.3-4.fc40.x86_64 >>> Stop post-install scriptlet: p11-kit-trust-0:0.25.3-4.fc40.x86_64 [101/157] Installing xxhash-libs-0:0.8. 100% | 87.8 MiB/s | 89.9 KiB | 00m00s [102/157] Installing libnghttp2-0:1.62. 100% | 163.3 MiB/s | 167.2 KiB | 00m00s [103/157] Installing libtool-ltdl-0:2.4 100% | 65.7 MiB/s | 67.3 KiB | 00m00s [104/157] Installing libbrotli-0:1.1.0- 100% | 203.1 MiB/s | 831.8 KiB | 00m00s [105/157] Installing qt6-srpm-macros-0: 100% | 0.0 B/s | 732.0 B | 00m00s [106/157] Installing qt5-srpm-macros-0: 100% | 0.0 B/s | 776.0 B | 00m00s [107/157] Installing perl-srpm-macros-0 100% | 0.0 B/s | 1.1 KiB | 00m00s [108/157] Installing package-notes-srpm 100% | 2.0 MiB/s | 2.0 KiB | 00m00s [109/157] Installing openblas-srpm-macr 100% | 0.0 B/s | 392.0 B | 00m00s [110/157] Installing ocaml-srpm-macros- 100% | 0.0 B/s | 2.2 KiB | 00m00s [111/157] Installing kernel-srpm-macros 100% | 2.3 MiB/s | 2.3 KiB | 00m00s [112/157] Installing gnat-srpm-macros-0 100% | 0.0 B/s | 1.3 KiB | 00m00s [113/157] Installing ghc-srpm-macros-0: 100% | 0.0 B/s | 1.0 KiB | 00m00s [114/157] Installing fpc-srpm-macros-0: 100% | 0.0 B/s | 420.0 B | 00m00s [115/157] Installing ansible-srpm-macro 100% | 35.4 MiB/s | 36.2 KiB | 00m00s [116/157] Installing coreutils-common-0 100% | 260.2 MiB/s | 11.2 MiB | 00m00s [117/157] Installing openssl-libs-1:3.2 100% | 311.9 MiB/s | 7.8 MiB | 00m00s [118/157] Installing coreutils-0:9.5-2. 100% | 155.3 MiB/s | 5.6 MiB | 00m00s >>> Running pre-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40.n >>> Stop pre-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40.noar [119/157] Installing ca-certificates-0: 100% | 2.6 MiB/s | 2.3 MiB | 00m01s >>> Running post-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40. >>> Stop post-install scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40.noa [120/157] Installing krb5-libs-0:1.21.2 100% | 191.2 MiB/s | 2.3 MiB | 00m00s [121/157] Installing libarchive-0:3.7.4 100% | 223.8 MiB/s | 916.6 KiB | 00m00s [122/157] Installing libtirpc-0:1.3.4-1 100% | 99.9 MiB/s | 204.6 KiB | 00m00s [123/157] Installing gzip-0:1.13-1.fc40 100% | 95.4 MiB/s | 390.6 KiB | 00m00s [124/157] Installing authselect-libs-0: 100% | 90.4 MiB/s | 833.2 KiB | 00m00s [125/157] Installing authselect-0:1.5.0 100% | 38.6 MiB/s | 157.9 KiB | 00m00s [126/157] Installing cracklib-0:2.9.11- 100% | 34.9 MiB/s | 250.3 KiB | 00m00s [127/157] Installing libpwquality-0:1.4 100% | 52.5 MiB/s | 430.1 KiB | 00m00s [128/157] Installing libnsl2-0:2.0.1-1. 100% | 28.8 MiB/s | 59.0 KiB | 00m00s [129/157] Installing pam-0:1.6.1-3.fc41 100% | 79.1 MiB/s | 1.8 MiB | 00m00s [130/157] Installing libssh-0:0.10.6-6. 100% | 167.8 MiB/s | 515.4 KiB | 00m00s [131/157] Installing rpm-sequoia-0:1.6. 100% | 221.0 MiB/s | 2.2 MiB | 00m00s [132/157] Installing rpm-libs-0:4.19.91 100% | 232.9 MiB/s | 715.4 KiB | 00m00s [133/157] Installing rpm-build-libs-0:4 100% | 101.3 MiB/s | 207.5 KiB | 00m00s [134/157] Installing libevent-0:2.1.12- 100% | 219.6 MiB/s | 899.4 KiB | 00m00s [135/157] Installing openldap-0:2.6.8-1 100% | 156.3 MiB/s | 640.0 KiB | 00m00s [136/157] Installing libcurl-0:8.8.0-1. 100% | 197.0 MiB/s | 806.8 KiB | 00m00s [137/157] Installing elfutils-debuginfo 100% | 32.7 MiB/s | 66.9 KiB | 00m00s [138/157] Installing binutils-gold-0:2. 100% | 101.5 MiB/s | 2.0 MiB | 00m00s >>> Running post-install scriptlet: binutils-gold-0:2.42.50-11.fc41.x86_64 >>> Stop post-install scriptlet: binutils-gold-0:2.42.50-11.fc41.x86_64 [139/157] Installing binutils-0:2.42.50 100% | 272.5 MiB/s | 27.5 MiB | 00m00s >>> Running post-install scriptlet: binutils-0:2.42.50-11.fc41.x86_64 >>> Stop post-install scriptlet: binutils-0:2.42.50-11.fc41.x86_64 [140/157] Installing elfutils-0:0.191-7 100% | 232.0 MiB/s | 2.6 MiB | 00m00s [141/157] Installing gdb-minimal-0:14.2 100% | 309.8 MiB/s | 12.7 MiB | 00m00s [142/157] Installing debugedit-0:5.0-16 100% | 98.6 MiB/s | 202.0 KiB | 00m00s [143/157] Installing curl-0:8.8.0-1.fc4 100% | 38.4 MiB/s | 746.2 KiB | 00m00s >>> Running pre-install scriptlet: rpm-0:4.19.91-8.fc41.x86_64 >>> Stop pre-install scriptlet: rpm-0:4.19.91-8.fc41.x86_64 [144/157] Installing rpm-0:4.19.91-8.fc 100% | 92.2 MiB/s | 2.5 MiB | 00m00s [145/157] Installing efi-srpm-macros-0: 100% | 40.2 MiB/s | 41.2 KiB | 00m00s [146/157] Installing lua-srpm-macros-0: 100% | 0.0 B/s | 1.9 KiB | 00m00s [147/157] Installing zig-srpm-macros-0: 100% | 1.6 MiB/s | 1.7 KiB | 00m00s [148/157] Installing fonts-srpm-macros- 100% | 55.1 MiB/s | 56.5 KiB | 00m00s [149/157] Installing forge-srpm-macros- 100% | 39.4 MiB/s | 40.3 KiB | 00m00s [150/157] Installing go-srpm-macros-0:3 100% | 60.5 MiB/s | 62.0 KiB | 00m00s [151/157] Installing python-srpm-macros 100% | 50.5 MiB/s | 51.7 KiB | 00m00s [152/157] Installing redhat-rpm-config- 100% | 61.9 MiB/s | 190.0 KiB | 00m00s [153/157] Installing rpm-build-0:4.19.9 100% | 49.5 MiB/s | 202.7 KiB | 00m00s [154/157] Installing pyproject-srpm-mac 100% | 2.0 MiB/s | 2.1 KiB | 00m00s [155/157] Installing util-linux-0:2.40. 100% | 89.1 MiB/s | 3.7 MiB | 00m00s >>> Running post-install scriptlet: util-linux-0:2.40.1-1.fc41.x86_64 >>> Stop post-install scriptlet: util-linux-0:2.40.1-1.fc41.x86_64 [156/157] Installing which-0:2.21-41.fc 100% | 20.1 MiB/s | 82.4 KiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [157/157] Installing info-0:7.1-2.fc40. 100% | 291.7 KiB/s | 358.2 KiB | 00m01s >>> Running post-transaction scriptlet: filesystem-0:3.18-9.fc41.x86_64 >>> Stop post-transaction scriptlet: filesystem-0:3.18-9.fc41.x86_64 >>> Running post-transaction scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.f >>> Stop post-transaction scriptlet: ca-certificates-0:2023.2.62_v7.0.401-6.fc40 >>> Running post-transaction scriptlet: authselect-libs-0:1.5.0-5.fc41.x86_64 >>> Stop post-transaction scriptlet: authselect-libs-0:1.5.0-5.fc41.x86_64 >>> Running post-transaction scriptlet: rpm-0:4.19.91-8.fc41.x86_64 >>> Stop post-transaction scriptlet: rpm-0:4.19.91-8.fc41.x86_64 >>> Running trigger-install scriptlet: glibc-common-0:2.39.9000-18.fc41.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39.9000-18.fc41.x86_64 >>> Running trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 >>> Stop trigger-install scriptlet: info-0:7.1-2.fc40.x86_64 Warning: skipped PGP checks for 19 packages from repository: copr_base Finish: installing minimal buildroot with dnf5 Start: creating root cache Finish: creating root cache Finish: chroot init INFO: Installed packages: INFO: add-determinism-nopython-0.2.0-9.fc41.x86_64 alternatives-1.27-1.fc41.x86_64 ansible-srpm-macros-1-15.fc41.noarch audit-libs-4.0.1-2.fc41.x86_64 authselect-1.5.0-5.fc41.x86_64 authselect-libs-1.5.0-5.fc41.x86_64 basesystem-11-20.fc40.noarch bash-5.2.26-3.fc40.x86_64 binutils-2.42.50-11.fc41.x86_64 binutils-gold-2.42.50-11.fc41.x86_64 build-reproducibility-srpm-macros-0.2.0-9.fc41.noarch bzip2-1.0.8-18.fc40.x86_64 bzip2-libs-1.0.8-18.fc40.x86_64 ca-certificates-2023.2.62_v7.0.401-6.fc40.noarch coreutils-9.5-2.fc41.x86_64 coreutils-common-9.5-2.fc41.x86_64 cpio-2.15-1.fc40.x86_64 cracklib-2.9.11-5.fc40.x86_64 crypto-policies-20240521-1.gitf71d135.fc41.noarch curl-8.8.0-1.fc41.x86_64 cyrus-sasl-lib-2.1.28-22.fc41.x86_64 debugedit-5.0-16.fc41.x86_64 diffutils-3.10-5.fc40.x86_64 dwz-0.15-6.fc40.x86_64 ed-1.20.2-1.fc41.x86_64 efi-srpm-macros-5-11.fc40.noarch elfutils-0.191-7.fc41.x86_64 elfutils-debuginfod-client-0.191-7.fc41.x86_64 elfutils-default-yama-scope-0.191-7.fc41.noarch elfutils-libelf-0.191-7.fc41.x86_64 elfutils-libs-0.191-7.fc41.x86_64 fedora-gpg-keys-41-0.2.noarch fedora-release-41-0.13.noarch fedora-release-common-41-0.13.noarch fedora-release-identity-basic-41-0.13.noarch fedora-repos-41-0.2.noarch fedora-repos-rawhide-41-0.2.noarch file-5.45-5.fc41.x86_64 file-libs-5.45-5.fc41.x86_64 filesystem-3.18-9.fc41.x86_64 findutils-4.10.0-2.fc41.x86_64 fonts-srpm-macros-2.0.5-14.fc40.noarch forge-srpm-macros-0.3.1-1.fc41.noarch fpc-srpm-macros-1.3-12.fc40.noarch gawk-5.3.0-3.fc40.x86_64 gdb-minimal-14.2-9.fc41.x86_64 gdbm-1.23-6.fc40.x86_64 gdbm-libs-1.23-6.fc40.x86_64 ghc-srpm-macros-1.9.1-1.fc41.noarch glibc-2.39.9000-18.fc41.x86_64 glibc-common-2.39.9000-18.fc41.x86_64 glibc-gconv-extra-2.39.9000-18.fc41.x86_64 glibc-minimal-langpack-2.39.9000-18.fc41.x86_64 gmp-6.3.0-1.fc41.x86_64 gnat-srpm-macros-6-5.fc40.noarch go-srpm-macros-3.6.0-1.fc41.noarch gpg-pubkey-a15b79cc-63d04c2c gpg-pubkey-e99d6ad1-64d2612c grep-3.11-8.fc41.x86_64 gzip-1.13-1.fc40.x86_64 info-7.1-2.fc40.x86_64 jansson-2.13.1-9.fc40.x86_64 kernel-srpm-macros-1.0-23.fc41.noarch keyutils-libs-1.6.3-3.fc40.x86_64 krb5-libs-1.21.2-5.fc40.x86_64 libacl-2.3.2-1.fc40.x86_64 libarchive-3.7.4-1.fc41.x86_64 libattr-2.5.2-3.fc40.x86_64 libblkid-2.40.1-1.fc41.x86_64 libbrotli-1.1.0-3.fc40.x86_64 libcap-2.70-1.fc41.x86_64 libcap-ng-0.8.5-2.fc41.x86_64 libcom_err-1.47.0-5.fc40.x86_64 libcurl-8.8.0-1.fc41.x86_64 libeconf-0.6.2-2.fc41.x86_64 libevent-2.1.12-13.fc41.x86_64 libfdisk-2.40.1-1.fc41.x86_64 libffi-3.4.6-1.fc41.x86_64 libgcc-14.1.1-4.fc41.x86_64 libgomp-14.1.1-4.fc41.x86_64 libidn2-2.3.7-1.fc40.x86_64 libmount-2.40.1-1.fc41.x86_64 libnghttp2-1.62.0-1.fc41.x86_64 libnsl2-2.0.1-1.fc40.x86_64 libpkgconf-2.1.1-1.fc41.x86_64 libpsl-0.21.5-3.fc40.x86_64 libpwquality-1.4.5-9.fc40.x86_64 libselinux-3.6-5.fc41.x86_64 libsemanage-3.6-3.fc41.x86_64 libsepol-3.6-3.fc40.x86_64 libsmartcols-2.40.1-1.fc41.x86_64 libssh-0.10.6-6.fc41.x86_64 libssh-config-0.10.6-6.fc41.noarch libstdc++-14.1.1-4.fc41.x86_64 libtasn1-4.19.0-6.fc40.x86_64 libtirpc-1.3.4-1.rc3.fc41.x86_64 libtool-ltdl-2.4.7-11.fc41.x86_64 libunistring-1.1-7.fc41.x86_64 libutempter-1.2.1-13.fc40.x86_64 libuuid-2.40.1-1.fc41.x86_64 libverto-0.3.2-8.fc40.x86_64 libxcrypt-4.4.36-5.fc40.x86_64 libxml2-2.12.7-1.fc41.x86_64 libzstd-1.5.6-1.fc41.x86_64 lua-libs-5.4.6-5.fc40.x86_64 lua-srpm-macros-1-13.fc40.noarch lz4-libs-1.9.4-6.fc40.x86_64 mpfr-4.2.1-4.fc41.x86_64 ncurses-base-6.4-12.20240127.fc40.noarch ncurses-libs-6.4-12.20240127.fc40.x86_64 ocaml-srpm-macros-10-2.fc41.noarch openblas-srpm-macros-2-17.fc41.noarch openldap-2.6.8-1.fc41.x86_64 openssl-libs-3.2.1-10.fc41.x86_64 p11-kit-0.25.3-4.fc40.x86_64 p11-kit-trust-0.25.3-4.fc40.x86_64 package-notes-srpm-macros-0.5-11.fc40.noarch pam-1.6.1-3.fc41.x86_64 pam-libs-1.6.1-3.fc41.x86_64 patch-2.7.6-24.fc40.x86_64 pcre2-10.43-2.fc41.1.x86_64 pcre2-syntax-10.43-2.fc41.1.noarch perl-srpm-macros-1-53.fc40.noarch pkgconf-2.1.1-1.fc41.x86_64 pkgconf-m4-2.1.1-1.fc41.noarch pkgconf-pkg-config-2.1.1-1.fc41.x86_64 popt-1.19-6.fc40.x86_64 publicsuffix-list-dafsa-20240107-3.fc40.noarch pyproject-srpm-macros-1.12.1-1.fc41.noarch python-srpm-macros-3.12-9.fc41.noarch qt5-srpm-macros-5.15.14-1.fc41.noarch qt6-srpm-macros-6.7.1-1.fc41.noarch readline-8.2-8.fc40.x86_64 redhat-rpm-config-292-1.fc41.noarch rpm-4.19.91-8.fc41.x86_64 rpm-build-4.19.91-8.fc41.x86_64 rpm-build-libs-4.19.91-8.fc41.x86_64 rpm-libs-4.19.91-8.fc41.x86_64 rpm-sequoia-1.6.0-3.fc41.x86_64 rust-srpm-macros-26.3-1.fc41.noarch sed-4.9-1.fc40.x86_64 setup-2.15.0-3.fc41.noarch shadow-utils-4.15.1-5.fc41.x86_64 sqlite-libs-3.46.0-1.fc41.x86_64 systemd-libs-256~rc3-4.fc41.x86_64 tar-1.35-3.fc40.x86_64 unzip-6.0-63.fc40.x86_64 util-linux-2.40.1-1.fc41.x86_64 util-linux-core-2.40.1-1.fc41.x86_64 which-2.21-41.fc40.x86_64 xxhash-libs-0.8.2-2.fc40.x86_64 xz-5.4.6-3.fc41.x86_64 xz-libs-5.4.6-3.fc41.x86_64 zig-srpm-macros-1-2.fc40.noarch zip-3.0-40.fc40.x86_64 zlib-ng-compat-2.1.6-6.fc41.x86_64 zstd-1.5.6-1.fc41.x86_64 Start: buildsrpm Start: rpmbuild -bs Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1717718400 Wrote: /builddir/build/SRPMS/python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Finish: rpmbuild -bs cp: preserving permissions for ‘/var/lib/copr-rpmbuild/results/chroot_scan/var/lib/mock/fedora-rawhide-x86_64-1717748748.394544/root/var/log’: No such file or directory INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-x86_64-1717748748.394544/root/var/log/dnf5.log Finish: buildsrpm INFO: Done(/var/lib/copr-rpmbuild/workspace/workdir-2njost3z/python-XStatic-FileSaver/python-XStatic-FileSaver.spec) Config(child) 0 minutes 47 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot INFO: Start(/var/lib/copr-rpmbuild/results/python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm) Config(fedora-rawhide-x86_64) Start(bootstrap): chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1717748748.394544/root. INFO: reusing tmpfs at /var/lib/mock/fedora-rawhide-x86_64-bootstrap-1717748748.394544/root. INFO: calling preinit hooks INFO: enabled root cache INFO: enabled package manager cache Start(bootstrap): cleaning package manager metadata Finish(bootstrap): cleaning package manager metadata Finish(bootstrap): chroot init Start: chroot init INFO: mounting tmpfs at /var/lib/mock/fedora-rawhide-x86_64-1717748748.394544/root. INFO: calling preinit hooks INFO: enabled root cache Start: unpacking root cache Finish: unpacking root cache INFO: enabled package manager cache Start: cleaning package manager metadata Finish: cleaning package manager metadata INFO: enabled HW Info plugin INFO: Buildroot is handled by package management downloaded with a bootstrap image: rpm-4.19.91-8.fc41.x86_64 rpm-sequoia-1.6.0-3.fc41.x86_64 dnf5-5.2.3.0-1.fc41.x86_64 dnf5-plugins-5.2.3.0-1.fc41.x86_64 Finish: chroot init Start: build phase for python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Start: build setup for python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1717718400 Wrote: /builddir/build/SRPMS/python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Updating and loading repositories: fedora 100% | 285.4 KiB/s | 5.7 KiB | 00m00s Copr repository 100% | 72.0 KiB/s | 2.2 KiB | 00m00s Copr repository 100% | 19.0 MiB/s | 4.1 MiB | 00m00s Repositories loaded. Package Arch Version Repository Size Installing: python3-devel x86_64 3.12.3-2.fc41 fedora 1.2 MiB python3-setuptools noarch 69.2.0-5.fc41 copr_base 7.2 MiB web-assets-devel noarch 5-21.fc40 fedora 1.6 KiB Installing dependencies: add-determinism x86_64 0.2.0-9.fc41 fedora 2.6 MiB expat x86_64 2.6.2-1.fc41 fedora 280.8 KiB fonts-filesystem noarch 1:2.0.5-14.fc40 fedora 0.0 B libb2 x86_64 0.98.1-11.fc40 fedora 42.2 KiB mpdecimal x86_64 2.5.1-9.fc40 fedora 200.9 KiB pyproject-rpm-macros noarch 1.12.1-1.fc41 fedora 99.6 KiB python-pip-wheel noarch 24.0-4.fc41 copr_base 1.5 MiB python-rpm-macros noarch 3.12-9.fc41 fedora 22.1 KiB python3 x86_64 3.12.3-2.fc41 fedora 31.5 KiB python3-libs x86_64 3.12.3-2.fc41 fedora 40.9 MiB python3-packaging noarch 24.0-2.fc41~bootstrap copr_base 424.8 KiB python3-rpm-generators noarch 14-10.fc40 fedora 81.7 KiB python3-rpm-macros noarch 3.12-9.fc41 fedora 6.4 KiB tzdata noarch 2024a-8.fc41 fedora 1.7 MiB web-assets-filesystem noarch 5-21.fc40 fedora 34.0 B Transaction Summary: Installing: 18 packages Total size of inbound packages is 14 MiB. Need to download 14 MiB. After this operation 56 MiB will be used (install 56 MiB, remove 0 B). [ 1/18] web-assets-devel-0:5-21.fc40.no 100% | 213.5 KiB/s | 9.2 KiB | 00m00s [ 2/18] web-assets-filesystem-0:5-21.fc 100% | 776.6 KiB/s | 7.8 KiB | 00m00s [ 3/18] python3-setuptools-0:69.2.0-5.f 100% | 14.4 MiB/s | 1.4 MiB | 00m00s [ 4/18] python3-devel-0:3.12.3-2.fc41.x 100% | 2.7 MiB/s | 313.0 KiB | 00m00s [ 5/18] fonts-filesystem-1:2.0.5-14.fc4 100% | 407.7 KiB/s | 8.2 KiB | 00m00s [ 6/18] expat-0:2.6.2-1.fc41.x86_64 100% | 7.4 MiB/s | 113.2 KiB | 00m00s [ 7/18] mpdecimal-0:2.5.1-9.fc40.x86_64 100% | 7.9 MiB/s | 88.6 KiB | 00m00s [ 8/18] libb2-0:0.98.1-11.fc40.x86_64 100% | 1.1 MiB/s | 25.5 KiB | 00m00s [ 9/18] add-determinism-0:0.2.0-9.fc41. 100% | 13.2 MiB/s | 906.5 KiB | 00m00s [10/18] tzdata-0:2024a-8.fc41.noarch 100% | 9.7 MiB/s | 714.9 KiB | 00m00s [11/18] python3-0:3.12.3-2.fc41.x86_64 100% | 2.4 MiB/s | 27.2 KiB | 00m00s [12/18] pyproject-rpm-macros-0:1.12.1-1 100% | 3.6 MiB/s | 40.9 KiB | 00m00s [13/18] python-rpm-macros-0:3.12-9.fc41 100% | 1.6 MiB/s | 18.0 KiB | 00m00s [14/18] python3-rpm-macros-0:3.12-9.fc4 100% | 799.9 KiB/s | 12.8 KiB | 00m00s [15/18] python3-rpm-generators-0:14-10. 100% | 1.8 MiB/s | 29.6 KiB | 00m00s [16/18] python-pip-wheel-0:24.0-4.fc41. 100% | 36.9 MiB/s | 1.5 MiB | 00m00s [17/18] python3-packaging-0:24.0-2.fc41 100% | 7.6 MiB/s | 116.9 KiB | 00m00s [18/18] python3-libs-0:3.12.3-2.fc41.x8 100% | 4.3 MiB/s | 9.1 MiB | 00m02s -------------------------------------------------------------------------------- [18/18] Total 100% | 6.5 MiB/s | 14.4 MiB | 00m02s Running transaction [ 1/20] Verify package files 100% | 305.0 B/s | 18.0 B | 00m00s [ 2/20] Prepare transaction 100% | 375.0 B/s | 18.0 B | 00m00s [ 3/20] Installing python-rpm-macros-0: 100% | 22.3 MiB/s | 22.8 KiB | 00m00s [ 4/20] Installing python3-rpm-macros-0 100% | 6.5 MiB/s | 6.7 KiB | 00m00s [ 5/20] Installing pyproject-rpm-macros 100% | 99.2 MiB/s | 101.6 KiB | 00m00s [ 6/20] Installing python-pip-wheel-0:2 100% | 218.3 MiB/s | 1.5 MiB | 00m00s [ 7/20] Installing tzdata-0:2024a-8.fc4 100% | 28.1 MiB/s | 1.9 MiB | 00m00s [ 8/20] Installing mpdecimal-0:2.5.1-9. 100% | 197.3 MiB/s | 202.0 KiB | 00m00s [ 9/20] Installing libb2-0:0.98.1-11.fc 100% | 42.3 MiB/s | 43.3 KiB | 00m00s [10/20] Installing expat-0:2.6.2-1.fc41 100% | 39.5 MiB/s | 282.9 KiB | 00m00s [11/20] Installing python3-libs-0:3.12. 100% | 205.6 MiB/s | 41.3 MiB | 00m00s [12/20] Installing python3-0:3.12.3-2.f 100% | 32.5 MiB/s | 33.2 KiB | 00m00s [13/20] Installing python3-packaging-0: 100% | 106.3 MiB/s | 435.5 KiB | 00m00s [14/20] Installing python3-rpm-generato 100% | 81.0 MiB/s | 82.9 KiB | 00m00s [15/20] Installing fonts-filesystem-1:2 100% | 769.5 KiB/s | 788.0 B | 00m00s [16/20] Installing web-assets-filesyste 100% | 835.9 KiB/s | 856.0 B | 00m00s [17/20] Installing web-assets-devel-0:5 100% | 2.5 MiB/s | 2.5 KiB | 00m00s [18/20] Installing python3-devel-0:3.12 100% | 91.2 MiB/s | 1.3 MiB | 00m00s [19/20] Installing python3-setuptools-0 100% | 146.3 MiB/s | 7.3 MiB | 00m00s warning: posix.fork(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.wait(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead warning: posix.exec(): .fork(), .exec(), .wait() and .redirect2null() are deprecated, use rpm.execute() instead [20/20] Installing add-determinism-0:0. 100% | 57.0 MiB/s | 2.6 MiB | 00m00s >>> Running trigger-install scriptlet: glibc-common-0:2.39.9000-18.fc41.x86_64 >>> Stop trigger-install scriptlet: glibc-common-0:2.39.9000-18.fc41.x86_64 Warning: skipped PGP checks for 3 packages from repository: copr_base Finish: build setup for python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Start: rpmbuild python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1717718400 Executing(%mkbuilddir): /bin/sh -e /var/tmp/rpm-tmp.hbhXxl + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + test -d /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + /usr/bin/rm -rf /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + /usr/bin/mkdir -p /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + /usr/bin/mkdir -p /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/SPECPARTS + RPM_EC=0 ++ jobs -p + exit 0 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.BEV3Oa + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + rm -rf XStatic-FileSaver-1.3.2.0 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/XStatic-FileSaver-1.3.2.0.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd XStatic-FileSaver-1.3.2.0 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + rm -rf XStatic-FileSaver.egg-info + sed -i 's|^BASE_DIR = .*|BASE_DIR = '\''/usr/share/javascript/filesaver'\''|' xstatic/pkg/filesaver/__init__.py + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MGhVCV + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd XStatic-FileSaver-1.3.2.0 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + /usr/bin/python3 setup.py build '--executable=/usr/bin/python3 -sP' /usr/lib/python3.12/site-packages/setuptools/dist.py:476: SetuptoolsDeprecationWarning: Invalid dash-separated options !! ******************************************************************************** Usage of dash-separated 'description-file' will not be supported in future versions. Please use the underscore name 'description_file' instead. By 2024-Sep-26, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. ******************************************************************************** !! opt = self.warn_dash_deprecation(opt, section) /usr/lib/python3.12/site-packages/setuptools/dist.py:476: SetuptoolsDeprecationWarning: Invalid dash-separated options !! ******************************************************************************** Usage of dash-separated 'maintainer-email' will not be supported in future versions. Please use the underscore name 'maintainer_email' instead. By 2024-Sep-26, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. ******************************************************************************** !! opt = self.warn_dash_deprecation(opt, section) /usr/lib/python3.12/site-packages/setuptools/dist.py:476: SetuptoolsDeprecationWarning: Invalid dash-separated options !! ******************************************************************************** Usage of dash-separated 'home-page' will not be supported in future versions. Please use the underscore name 'home_page' instead. By 2024-Sep-26, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. ******************************************************************************** !! opt = self.warn_dash_deprecation(opt, section) /usr/lib/python3.12/site-packages/setuptools/dist.py:678: SetuptoolsDeprecationWarning: The namespace_packages parameter is deprecated. !! ******************************************************************************** Please replace its usage with implicit namespaces (PEP 420). See https://setuptools.pypa.io/en/latest/references/keywords.html#keyword-namespace-packages for details. ******************************************************************************** !! ep.load()(self, ep.name, value) running build running build_py creating build creating build/lib creating build/lib/xstatic copying xstatic/__init__.py -> build/lib/xstatic creating build/lib/xstatic/pkg copying xstatic/pkg/__init__.py -> build/lib/xstatic/pkg creating build/lib/xstatic/pkg/filesaver copying xstatic/pkg/filesaver/__init__.py -> build/lib/xstatic/pkg/filesaver running egg_info writing XStatic_FileSaver.egg-info/PKG-INFO writing dependency_links to XStatic_FileSaver.egg-info/dependency_links.txt writing namespace_packages to XStatic_FileSaver.egg-info/namespace_packages.txt writing top-level names to XStatic_FileSaver.egg-info/top_level.txt reading manifest file 'XStatic_FileSaver.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no previously-included files matching '*.pyo' found anywhere in distribution warning: no previously-included files matching '*.orig' found anywhere in distribution warning: no previously-included files matching '*.rej' found anywhere in distribution writing manifest file 'XStatic_FileSaver.egg-info/SOURCES.txt' /usr/lib/python3.12/site-packages/setuptools/command/build_py.py:207: _Warning: Package 'xstatic.pkg.filesaver.data' is absent from the `packages` configuration. !! ******************************************************************************** ############################ # Package would be ignored # ############################ Python recognizes 'xstatic.pkg.filesaver.data' as an importable package[^1], but it is absent from setuptools' `packages` configuration. This leads to an ambiguous overall configuration. If you want to distribute this package, please make sure that 'xstatic.pkg.filesaver.data' is explicitly added to the `packages` configuration field. Alternatively, you can also rely on setuptools' discovery methods (for example by using `find_namespace_packages(...)`/`find_namespace:` instead of `find_packages(...)`/`find:`). You can read more about "package discovery" on setuptools documentation page: - https://setuptools.pypa.io/en/latest/userguide/package_discovery.html If you don't want 'xstatic.pkg.filesaver.data' to be distributed and are already explicitly excluding 'xstatic.pkg.filesaver.data' via `find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`, you can try to use `exclude_package_data`, or `include-package-data=False` in combination with a more fine grained `package-data` configuration. You can read more about "package data files" on setuptools documentation page: - https://setuptools.pypa.io/en/latest/userguide/datafiles.html [^1]: For Python, any directory (with suitable naming) can be imported, even if it does not contain any `.py` files. On the other hand, currently there is no concept of package data directory, all directories are treated like packages. ******************************************************************************** !! check.warn(importable) creating build/lib/xstatic/pkg/filesaver/data copying xstatic/pkg/filesaver/data/FileSaver.js -> build/lib/xstatic/pkg/filesaver/data + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JwfUmO + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + '[' /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT '!=' / ']' + rm -rf /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT ++ dirname /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT + mkdir -p /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + mkdir /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd XStatic-FileSaver-1.3.2.0 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + /usr/bin/python3 setup.py install -O1 --skip-build --root /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT --prefix /usr /usr/lib/python3.12/site-packages/setuptools/dist.py:476: SetuptoolsDeprecationWarning: Invalid dash-separated options !! ******************************************************************************** Usage of dash-separated 'description-file' will not be supported in future versions. Please use the underscore name 'description_file' instead. By 2024-Sep-26, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. ******************************************************************************** !! opt = self.warn_dash_deprecation(opt, section) /usr/lib/python3.12/site-packages/setuptools/dist.py:476: SetuptoolsDeprecationWarning: Invalid dash-separated options !! ******************************************************************************** Usage of dash-separated 'maintainer-email' will not be supported in future versions. Please use the underscore name 'maintainer_email' instead. By 2024-Sep-26, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. ******************************************************************************** !! opt = self.warn_dash_deprecation(opt, section) /usr/lib/python3.12/site-packages/setuptools/dist.py:476: SetuptoolsDeprecationWarning: Invalid dash-separated options !! ******************************************************************************** Usage of dash-separated 'home-page' will not be supported in future versions. Please use the underscore name 'home_page' instead. By 2024-Sep-26, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details. ******************************************************************************** !! opt = self.warn_dash_deprecation(opt, section) /usr/lib/python3.12/site-packages/setuptools/dist.py:678: SetuptoolsDeprecationWarning: The namespace_packages parameter is deprecated. !! ******************************************************************************** Please replace its usage with implicit namespaces (PEP 420). See https://setuptools.pypa.io/en/latest/references/keywords.html#keyword-namespace-packages for details. ******************************************************************************** !! ep.load()(self, ep.name, value) running install /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. Follow the current Python packaging guidelines when building Python RPM packages. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html and https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/ for details. ******************************************************************************** !! self.initialize_options() running install_lib Skipping installation of /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/xstatic/__init__.py (namespace package) copying xstatic/pkg/filesaver/__init__.py -> /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/xstatic/pkg/filesaver Skipping installation of /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/xstatic/pkg/__init__.py (namespace package) copying xstatic/pkg/filesaver/data/FileSaver.js -> /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/xstatic/pkg/filesaver/data byte-compiling /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/xstatic/pkg/filesaver/__init__.py to __init__.cpython-312.pyc writing byte-compilation script '/tmp/tmpl1mu4t9d.py' /usr/bin/python3 /tmp/tmpl1mu4t9d.py removing /tmp/tmpl1mu4t9d.py running install_egg_info running egg_info writing XStatic_FileSaver.egg-info/PKG-INFO writing dependency_links to XStatic_FileSaver.egg-info/dependency_links.txt writing namespace_packages to XStatic_FileSaver.egg-info/namespace_packages.txt writing top-level names to XStatic_FileSaver.egg-info/top_level.txt reading manifest file 'XStatic_FileSaver.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no previously-included files matching '*.pyo' found anywhere in distribution warning: no previously-included files matching '*.orig' found anywhere in distribution warning: no previously-included files matching '*.rej' found anywhere in distribution writing manifest file 'XStatic_FileSaver.egg-info/SOURCES.txt' Copying XStatic_FileSaver.egg-info to /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/XStatic_FileSaver-1.3.2.0-py3.12.egg-info Installing /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/XStatic_FileSaver-1.3.2.0-py3.12-nspkg.pth running install_scripts + rm -rfv /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/bin/__pycache__ + mkdir -p /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT//usr/share/javascript/filesaver + mv /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT//usr/lib/python3.12/site-packages/xstatic/pkg/filesaver/data/FileSaver.js /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT//usr/share/javascript/filesaver + rmdir /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12/site-packages/xstatic/pkg/filesaver/data/ + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs + /usr/lib/rpm/brp-remove-la-files + env /usr/lib/rpm/redhat/brp-python-bytecompile '' 1 0 -j2 Bytecompiling .py files below /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/lib/python3.12 using python3.12 + /usr/lib/rpm/redhat/brp-python-hardlink + /usr/bin/add-determinism --brp -j2 /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT Cannot initialize handler pyc: ModuleNotFoundError: No module named 'marshalparser' [src/multiprocess.rs:66:9] &cmd = Command { program: "/usr/bin/add-determinism", args: [ "/usr/bin/add-determinism", "--socket", "3", "--brp", "--handler", "ar,jar,javadoc", ], env: CommandEnv { clear: false, vars: { "SOURCE_DATE_EPOCH": Some( "1717718400", ), }, }, create_pidfd: false, } Bye! Bye! Processing files: xstatic-filesaver-common-1.3.2.0-21.fc41.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.FxwpTO + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + cd XStatic-FileSaver-1.3.2.0 + DOCDIR=/builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/share/doc/xstatic-filesaver-common + export LC_ALL=C.UTF-8 + LC_ALL=C.UTF-8 + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/share/doc/xstatic-filesaver-common + cp -pr /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/XStatic-FileSaver-1.3.2.0/README.txt /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/share/doc/xstatic-filesaver-common + RPM_EC=0 ++ jobs -p + exit 0 Provides: xstatic-filesaver-common = 1.3.2.0-21.fc41 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: python3-XStatic-FileSaver-1.3.2.0-21.fc41.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.9rNyAe + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + cd XStatic-FileSaver-1.3.2.0 + DOCDIR=/builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/share/doc/python3-XStatic-FileSaver + export LC_ALL=C.UTF-8 + LC_ALL=C.UTF-8 + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/share/doc/python3-XStatic-FileSaver + cp -pr /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/XStatic-FileSaver-1.3.2.0/README.txt /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT/usr/share/doc/python3-XStatic-FileSaver + RPM_EC=0 ++ jobs -p + exit 0 Provides: python-XStatic-FileSaver = 1.3.2.0-21.fc41 python3-XStatic-FileSaver = 1.3.2.0-21.fc41 python3.12-XStatic-FileSaver = 1.3.2.0-21.fc41 python3.12dist(xstatic-filesaver) = 1.3.2 python3dist(xstatic-filesaver) = 1.3.2 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: python(abi) = 3.12 Obsoletes: python-XStatic-FileSaver < 1.3.2.0-21.fc41 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build/BUILDROOT Wrote: /builddir/build/RPMS/python3-XStatic-FileSaver-1.3.2.0-21.fc41.noarch.rpm Wrote: /builddir/build/RPMS/xstatic-filesaver-common-1.3.2.0-21.fc41.noarch.rpm Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.q3lNJJ + umask 022 + cd /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + test -d /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + rm -rf /builddir/build/BUILD/python-XStatic-FileSaver-1.3.2.0-build + RPM_EC=0 ++ jobs -p + exit 0 Finish: rpmbuild python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm Finish: build phase for python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm INFO: chroot_scan: 1 files copied to /var/lib/copr-rpmbuild/results/chroot_scan INFO: /var/lib/mock/fedora-rawhide-x86_64-1717748748.394544/root/var/log/dnf5.log INFO: Done(/var/lib/copr-rpmbuild/results/python-XStatic-FileSaver-1.3.2.0-21.fc41.src.rpm) Config(child) 0 minutes 9 seconds INFO: Results and/or logs in: /var/lib/copr-rpmbuild/results INFO: Cleaning up build root ('cleanup_on_success=True') Start: clean chroot INFO: unmounting tmpfs. Finish: clean chroot Finish: run Running RPMResults tool Package info: { "packages": [ { "name": "xstatic-filesaver-common", "epoch": null, "version": "1.3.2.0", "release": "21.fc41", "arch": "noarch" }, { "name": "python3-XStatic-FileSaver", "epoch": null, "version": "1.3.2.0", "release": "21.fc41", "arch": "noarch" }, { "name": "python-XStatic-FileSaver", "epoch": null, "version": "1.3.2.0", "release": "21.fc41", "arch": "src" } ] } RPMResults finished