Mock Version: 3.5 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target s390x --nodeps /builddir/build/SPECS/system-config-printer.spec'], chrootPath='/var/lib/mock/fedora-rawhide-s390x-1684960680.164262/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=0uid=1001gid=135user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.8qpovaln:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=TrueprintOutput=True) Using nspawn with args ['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.8qpovaln:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '1305717aa25d4dde8933e66a53625e5e', '-D', '/var/lib/mock/fedora-rawhide-s390x-1684960680.164262/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.8qpovaln:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bs --target s390x --nodeps /builddir/build/SPECS/system-config-printer.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False Building target platforms: s390x Building for target s390x setting SOURCE_DATE_EPOCH=1678752000 Wrote: /builddir/build/SRPMS/system-config-printer-1.5.18-3.fc39.src.rpm Child return code was: 0 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target s390x --nodeps /builddir/build/SPECS/system-config-printer.spec'], chrootPath='/var/lib/mock/fedora-rawhide-s390x-1684960680.164262/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=0uid=1001gid=135user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.8qpovaln:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=TrueprintOutput=True) Using nspawn with args ['--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.8qpovaln:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', 'f7831ec2ec324a56845b069aeea57388', '-D', '/var/lib/mock/fedora-rawhide-s390x-1684960680.164262/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--rlimit=RLIMIT_NOFILE=10240', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.8qpovaln:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bb --target s390x --nodeps /builddir/build/SPECS/system-config-printer.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False Building target platforms: s390x Building for target s390x setting SOURCE_DATE_EPOCH=1678752000 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GvNiOJ + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf system-config-printer-1.5.18 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/system-config-printer-1.5.18.tar.xz + STATUS=0 + '[' 0 -ne 0 ']' + cd system-config-printer-1.5.18 + /usr/bin/mkdir -p SPECPARTS + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/git init -q + /usr/bin/git config user.name rpm-build + /usr/bin/git config user.email '' + /usr/bin/git config gc.auto 0 + /usr/bin/git add --force . + /usr/bin/git commit -q --allow-empty -a --author 'rpm-build ' -m 'system-config-printer-1.5.18 base' + /usr/bin/git checkout --track -b rpm-build Switched to a new branch 'rpm-build' branch 'rpm-build' set up to track 'master'. + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/0001-Fix-debugprint-in-options.py-fixes-291.patch + /usr/bin/git apply --index --reject - Checking patch options.py... Applied patch options.py cleanly. + /usr/bin/git commit -q -m 0001-Fix-debugprint-in-options.py-fixes-291.patch --author 'rpm-build ' + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.5AfVJJ + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Clink-arg=-Wl,-z,relro -Clink-arg=-Wl,-z,now -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd system-config-printer-1.5.18 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Clink-arg=-Wl,-z,relro -Clink-arg=-Wl,-z,now -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + '[' '-flto=auto -ffat-lto-objectsx' '!=' x ']' ++ find . -type f -name configure -print + for file in $(find . -type f -name configure -print) + /usr/bin/sed -r --in-place=.backup 's/^char \(\*f\) \(\) = /__attribute__ ((used)) char (*f) () = /g' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed -r --in-place=.backup 's/^char \(\*f\) \(\);/__attribute__ ((used)) char (*f) ();/g' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed -r --in-place=.backup 's/^char \$2 \(\);/__attribute__ ((used)) char \$2 ();/g' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed --in-place=.backup '1{$!N;$!N};$!N;s/int x = 1;\nint y = 0;\nint z;\nint nan;/volatile int x = 1; volatile int y = 0; volatile int z, nan;/;P;D' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed --in-place=.backup 's#^lt_cv_sys_global_symbol_to_cdecl=.*#lt_cv_sys_global_symbol_to_cdecl="sed -n -e '\''s/^T .* \\(.*\\)$/extern int \\1();/p'\'' -e '\''s/^$symcode* .* \\(.*\\)$/extern char \\1;/p'\''"#' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + '[' 1 = 1 ']' + '[' x '!=' 'x-Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ']' ++ find . -name ltmain.sh ++ grep -q runstatedir=DIR ./configure ++ echo --runstatedir=/run + ./configure --build=s390x-redhat-linux --host=s390x-redhat-linux --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --runstatedir=/run --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-udev-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for s390x-redhat-linux-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... s390x-redhat-linux-gnu checking host system type... s390x-redhat-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib64 checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.11 checking for python3 platform... linux checking for GNU default python3 prefix... ${prefix} checking for GNU default python3 exec_prefix... ${exec_prefix} checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages checking for s390x-redhat-linux-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUPS SERVERBIN dir... /usr/lib/cups checking for GLIB... yes checking for libudev... yes checking for libusb... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands + /usr/bin/make -O -j2 V=1 VERBOSE=1 Making all in . make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml touch .stamp-man-pages-built make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.18|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/mkdir -p cupshelpers sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/python3 setup.py build running build running build_py creating build creating build/lib creating build/lib/cupshelpers copying cupshelpers/config.py -> build/lib/cupshelpers copying cupshelpers/xmldriverprefs.py -> build/lib/cupshelpers copying cupshelpers/installdriver.py -> build/lib/cupshelpers copying cupshelpers/ppds.py -> build/lib/cupshelpers copying cupshelpers/__init__.py -> build/lib/cupshelpers copying cupshelpers/openprinting.py -> build/lib/cupshelpers copying cupshelpers/cupshelpers.py -> build/lib/cupshelpers make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' /builddir/build/BUILD/system-config-printer-1.5.18/setup.py:20: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils.core import setup make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -pthread -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' udev/udev-configure-printer.c: In function 'device_id_from_devpath': udev/udev-configure-printer.c:856:10: warning: passing argument 1 of 'g_free' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 856 | g_free(device_id); | ^~~~~~~~~ In file included from /usr/include/glib-2.0/glib/glist.h:34, from /usr/include/glib-2.0/glib/ghash.h:36, from /usr/include/glib-2.0/glib.h:52, from udev/udev-configure-printer.c:52: /usr/include/glib-2.0/glib/gmem.h:74:42: note: expected 'gpointer' {aka 'void *'} but argument is of type 'const char *' 74 | void g_free (gpointer mem); | ~~~~~~~~~~~~~~^~~ udev/udev-configure-printer.c: In function 'find_matching_device_uris': udev/udev-configure-printer.c:1031:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1031 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'for_each_matching_queue': udev/udev-configure-printer.c:1362:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1362 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'enable_queue': udev/udev-configure-printer.c:1553:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1553 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'remove_queue': udev/udev-configure-printer.c:1745:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1745 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function 'disable_queue': udev/udev-configure-printer.c:1777:3: warning: 'httpConnectEncrypt' is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1777 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -pthread -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' Making all in po make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[1]: Nothing to be done for 'all'. + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Un8lrm + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x '!=' / ']' + rm -rf /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x ++ dirname /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Clink-arg=-Wl,-z,relro -Clink-arg=-Wl,-z,now -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd system-config-printer-1.5.18 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x 'INSTALL=/usr/bin/install -p' Making install in . make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/python3 setup.py build /builddir/build/BUILD/system-config-printer-1.5.18/setup.py:20: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils.core import setup running build running build_py make[2]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/python3 setup.py install --prefix=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr /builddir/build/BUILD/system-config-printer-1.5.18/setup.py:20: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils.core import setup running install running build running build_py running install_lib creating /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr creating /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib creating /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11 creating /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages creating /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/cupshelpers.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/openprinting.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/__init__.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/ppds.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/installdriver.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/xmldriverprefs.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers copying build/lib/cupshelpers/config.py -> /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/cupshelpers.py to cupshelpers.cpython-311.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/openprinting.py to openprinting.cpython-311.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/__init__.py to __init__.cpython-311.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/ppds.py to ppds.cpython-311.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/installdriver.py to installdriver.cpython-311.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/xmldriverprefs.py to xmldriverprefs.cpython-311.pyc byte-compiling /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers/config.py to config.cpython-311.pyc running install_egg_info Writing /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/python3.11/site-packages/cupshelpers-1.0-py3.11.egg-info /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/bin' /usr/bin/install -p system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/metainfo' /usr/bin/install -p -m 644 system-config-printer.appdata.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/metainfo' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/etc/cupshelpers' /usr/bin/install -p -m 644 xml/preferreddrivers.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/etc/cupshelpers' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/etc/dbus-1/system.d/' /usr/bin/install -p -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/dbus-1/interfaces/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/dbus-1/interfaces/' mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/applications/ mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/applications/ desktop-file-install \ --dir /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop desktop-file-install \ --dir /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/man/man1' /usr/bin/install -p -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/man/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/troubleshoot' /usr/bin/install -p -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/troubleshoot' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/xml' /usr/bin/install -p -m 644 xml/preferreddrivers.rng xml/validate.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/icons' /usr/bin/install -p -m 644 icons/i-network-printer.png '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p troubleshoot/__init__.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/dbus-1/services/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.service '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/systemd/system' /usr/bin/install -p -m 644 udev/configure-printer@.service '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/systemd/system' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev' /usr/bin/install -p udev/udev-configure-printer '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev' /usr/bin/install -p udev/udev-add-printer '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/rules.d' /usr/bin/install -p -m 644 udev/70-printers.rules '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/rules.d' make[2]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' Making install in po make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition installing ar.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo if test "system-config-printer" = "gettext-tools"; then \ /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -p -m 644 ./$file \ /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/var/run/udev-configure-printer + touch /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/var/run/udev-configure-printer/usb-uris + [[ /usr/bin/python3 =~ - ]] + clamp_source_mtime /usr/bin/python3 /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer + python_binary='env /usr/bin/python3' + bytecode_compilation_path=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer + PYTHONPATH=/usr/lib/rpm/redhat + env /usr/bin/python3 -s -B -m clamp_source_mtime /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer'... Clamping mtime of '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/config.py' Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/icons'... Clamping mtime of '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/options.py' Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/ui'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/xml'... ++ /usr/bin/python3 -c 'import sys; sys.stdout.write('\''{0.major}{0.minor}'\''.format(sys.version_info))' + python_version=311 + '[' 311 -ge 39 ']' + py39_byte_compile /usr/bin/python3 /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer + python_binary='env PYTHONHASHSEED=0 /usr/bin/python3' + bytecode_compilation_path=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer + env PYTHONHASHSEED=0 /usr/bin/python3 -s -B -m compileall -j2 -o 0 -o 1 -s /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x -p / --hardlink-dupes --invalidation-mode=timestamp /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/OpenPrintingRequest.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/SearchCriterion.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/ToolbarSearchEntry.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/asyncconn.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/asyncipp.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/authconn.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/config.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/cupspk.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/firewallsettings.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/gui.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/installpackage.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/jobviewer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/options.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/optionwidgets.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/ppdcache.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/ppdippstr.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/ppdsloader.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/printerproperties.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/probe_printer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/pysmb.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/serversettings.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/smburi.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/statereason.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/timedops.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/CheckLocalServerPublishing.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/CheckNetworkServerSanity.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/CheckPPDSanity.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/CheckPrinterSanity.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/CheckSELinux.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/CheckUSBPermissions.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/ChooseNetworkPrinter.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/ChoosePrinter.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/DeviceListed.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/ErrorLogCheckpoint.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/ErrorLogFetch.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/ErrorLogParse.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/LocalOrRemote.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/Locale.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/NetworkCUPSPrinterShared.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/PrintTestPage.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/ServerFirewalled.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/VerifyPackages.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/Welcome.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/base.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/userdefault.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/xml/validate.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/HIG.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/PhysicalDevice.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/applet.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/asyncpk1.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/check-device-ids.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/debug.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/dnssdresolve.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/errordialogs.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/gtkinklevel.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/install-printerdriver.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/killtimer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/monitor.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/newprinter.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/scp-dbus-service.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/system-config-printer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/PrinterStateReasons.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/QueueNotEnabled.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/QueueRejectingJobs.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/RemoteAddress.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/SchedulerNotRunning.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/Shrug.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot/__init__.py'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/icons'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/troubleshoot'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/ui'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x//usr/share/system-config-printer/xml'... + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x system-config-printer + /usr/bin/find-debuginfo -j2 --strict-build-id -m -i --build-id-seed 1.5.18-3.fc39 --unique-debug-suffix -1.5.18-3.fc39.s390x --unique-debug-src-base system-config-printer-1.5.18-3.fc39.s390x --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 50000000 -S debugsourcefiles.list /builddir/build/BUILD/system-config-printer-1.5.18 extracting debug info from /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/udev-configure-printer /usr/bin/gdb.minimal original debug info size: 108kB, size after compression: 100kB /usr/bin/sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. 99 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump /usr/bin/strip: /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/stK0ujGe[.gnu.build.attributes.lo]: error: failed to locate merged notes: file format not recognized /usr/bin/strip: /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/stK0ujGe[.gnu.build.attributes.lo.hot]: error: failed to locate merged notes: file format not recognized /usr/bin/strip: /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/stK0ujGe[.gnu.build.attributes.lo.unlikely]: error: failed to locate merged notes: file format not recognized /usr/bin/strip: /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/stK0ujGe[.gnu.build.attributes.lo.startup]: error: failed to locate merged notes: file format not recognized /usr/bin/strip: /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/lib/udev/stK0ujGe[.gnu.build.attributes.lo.exit]: error: failed to locate merged notes: file format not recognized + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/bin/scp-dbus-service from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/system-config-printer-applet from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/install-printerdriver from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/system-config-printer from /bin/sh to #!/usr/bin/sh + /usr/lib/rpm/brp-remove-la-files + env SHELL=/bin/bash RPM_SOURCE_DIR=/builddir/build/SOURCES HISTCONTROL=ignoredups PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig HOSTNAME=f7831ec2ec324a56845b069aeea57388 HISTSIZE=1000 RPM_SPECPARTS_DIR=/builddir/build/BUILD/system-config-printer-1.5.18/SPECPARTS container_host_version_id=37 FFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules PWD=/builddir/build/BUILD/system-config-printer-1.5.18 SOURCE_DATE_EPOCH=1678752000 LOGNAME=mockbuild CXX=g++ CXXFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection RPM_ARCH=s390x container=systemd-nspawn LDFLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes HOME=/builddir LANG=C RPM_LD_FLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes RUSTFLAGS=-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Clink-arg=-Wl,-z,relro -Clink-arg=-Wl,-z,now -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn PROMPT_COMMAND=printf "\033]0;\007" RPM_PACKAGE_RELEASE=3.fc39 RPM_OS=linux LT_SYS_LIBRARY_PATH=/usr/lib64: FCFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection -I/usr/lib64/gfortran/modules TERM=vt100 LESSOPEN=||/usr/bin/lesspipe.sh %s USER=mockbuild NOTIFY_SOCKET=/run/host/notify SHLVL=1 RPM_BUILD_DIR=/builddir/build/BUILD container_host_id=fedora RPM_OPT_FLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection VALAFLAGS=-g RPM_DOC_DIR=/usr/share/doc RPM_PACKAGE_VERSION=1.5.18 container_host_variant_id=cloud CONFIG_SITE=NONE PATH=/builddir/.local/bin:/builddir/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin CC=gcc CFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -fuse-ld=lld -Wl,--build-id=sha1 -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=z13 -mtune=z14 -fasynchronous-unwind-tables -fstack-clash-protection MAIL=/var/spool/mail/mockbuild RPM_BUILD_NCPUS=2 container_uuid=7a8ff4a7-73c5-4dee-b989-b71bede11e0e RPM_PACKAGE_NAME=system-config-printer RPM_BUILD_ROOT=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x OLDPWD=/builddir/build/BUILD _=/usr/bin/env + /usr/lib/rpm/redhat/brp-python-hardlink Processing files: system-config-printer-1.5.18-3.fc39.s390x Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.qwLn9W + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + DOCDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/NEWS /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ABOUT-NLS /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/AUTHORS /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog-OLD /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Lg834t + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + LICENSEDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/licenses/system-config-printer + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/licenses/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/COPYING /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/licenses/system-config-printer + RPM_EC=0 ++ jobs -p + exit 0 Provides: application() application(system-config-printer.desktop) metainfo() metainfo(system-config-printer.appdata.xml) system-config-printer = 1.5.18-3.fc39 system-config-printer(s390-64) = 1.5.18-3.fc39 Requires(interp): /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh systemd Requires(preun): systemd Requires(postun): systemd Requires: /usr/bin/python3 /usr/bin/sh Processing files: system-config-printer-libs-1.5.18-3.fc39.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.JuxBWh + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + DOCDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + export LC_ALL=C + LC_ALL=C + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/NEWS /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ABOUT-NLS /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/AUTHORS /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog-OLD /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/doc/system-config-printer-libs + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.PQwxtj + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + LICENSEDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/licenses/system-config-printer-libs + export LC_ALL=C + LC_ALL=C + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/licenses/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/COPYING /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x/usr/share/licenses/system-config-printer-libs + RPM_EC=0 ++ jobs -p + exit 0 Provides: config(system-config-printer-libs) = 1.5.18-3.fc39 python3.11dist(cupshelpers) = 1 python3dist(cupshelpers) = 1 system-config-printer-libs = 1.5.18-3.fc39 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 /usr/bin/sh python(abi) = 3.11 Recommends: PackageKit PackageKit-glib Suggests: python3-smbc Processing files: system-config-printer-applet-1.5.18-3.fc39.s390x Provides: system-config-printer-applet = 1.5.18-3.fc39 system-config-printer-applet(s390-64) = 1.5.18-3.fc39 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 /usr/bin/sh Processing files: system-config-printer-udev-1.5.18-3.fc39.s390x Provides: config(system-config-printer-udev) = 1.5.18-3.fc39 system-config-printer-udev = 1.5.18-3.fc39 system-config-printer-udev(s390-64) = 1.5.18-3.fc39 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 libc.so.6()(64bit) libc.so.6(GLIBC_2.2)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.4)(64bit) libcups.so.2()(64bit) libglib-2.0.so.0()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) libusb-1.0.so.0()(64bit) rtld(GNU_HASH) Processing files: system-config-printer-debugsource-1.5.18-3.fc39.s390x Provides: system-config-printer-debugsource = 1.5.18-3.fc39 system-config-printer-debugsource(s390-64) = 1.5.18-3.fc39 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: system-config-printer-udev-debuginfo-1.5.18-3.fc39.s390x Provides: debuginfo(build-id) = f6e022fb4fa6deeeb999b0ae605c07dbd2da292c system-config-printer-udev-debuginfo = 1.5.18-3.fc39 system-config-printer-udev-debuginfo(s390-64) = 1.5.18-3.fc39 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: system-config-printer-debugsource(s390-64) = 1.5.18-3.fc39 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x Wrote: /builddir/build/RPMS/system-config-printer-1.5.18-3.fc39.s390x.rpm Wrote: /builddir/build/RPMS/system-config-printer-udev-debuginfo-1.5.18-3.fc39.s390x.rpm Wrote: /builddir/build/RPMS/system-config-printer-applet-1.5.18-3.fc39.s390x.rpm Wrote: /builddir/build/RPMS/system-config-printer-debugsource-1.5.18-3.fc39.s390x.rpm Wrote: /builddir/build/RPMS/system-config-printer-udev-1.5.18-3.fc39.s390x.rpm Wrote: /builddir/build/RPMS/system-config-printer-libs-1.5.18-3.fc39.noarch.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5X94NA + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + /usr/bin/rm -rf /builddir/build/BUILDROOT/system-config-printer-1.5.18-3.fc39.s390x + RPM_EC=0 ++ jobs -p + exit 0 Executing(rmbuild): /bin/sh -e /var/tmp/rpm-tmp.RJfJ2P + umask 022 + cd /builddir/build/BUILD + rm -rf system-config-printer-1.5.18 system-config-printer-1.5.18.gemspec + RPM_EC=0 ++ jobs -p + exit 0 Child return code was: 0