# To be reversed as soon as we verify that majority of software compiles # fine against 3.0 version %bcond_without devel # For the curious: # 0.9.5a soversion = 0 # 0.9.6 soversion = 1 # 0.9.6a soversion = 2 # 0.9.6c soversion = 3 # 0.9.7a soversion = 4 # 0.9.7ef soversion = 5 # 0.9.8ab soversion = 6 # 0.9.8g soversion = 7 # 0.9.8jk + EAP-FAST soversion = 8 # 1.0.0 soversion = 10 # 1.1.0 soversion = 1.1 (same as upstream although presence of some symbols # depends on build configuration options) %define soversion 1.1 # Arches on which we need to prevent arch conflicts on opensslconf.h, must # also be handled in opensslconf-new.h. %define multilib_arches %{ix86} ia64 %{mips} ppc ppc64 s390 s390x sparcv9 sparc64 x86_64 %global _performance_build 1 Summary: Compatibility version of the OpenSSL library Name: openssl1.1 Version: 1.1.1q Release: 5%{?dist} Epoch: 1 # We have to remove certain patented algorithms from the openssl source # tarball with the hobble-openssl script which is included below. # The original openssl upstream tarball cannot be shipped in the .src.rpm. Source: openssl-%{version}-hobbled.tar.xz Source1: hobble-openssl Source9: opensslconf-new.h Source10: opensslconf-new-warning.h Source12: ec_curve.c Source13: ectest.c # Build changes Patch1: openssl-1.1.1-build.patch Patch2: openssl-1.1.1-defaults.patch Patch3: openssl-1.1.1-no-html.patch Patch4: openssl-1.1.1-man-rename.patch # Functionality changes Patch31: openssl-1.1.1-conf-paths.patch Patch32: openssl-1.1.1-version-add-engines.patch Patch33: openssl-1.1.1-apps-dgst.patch Patch36: openssl-1.1.1-no-brainpool.patch Patch37: openssl-1.1.1-ec-curves.patch Patch38: openssl-1.1.1-no-weak-verify.patch Patch40: openssl-1.1.1-disable-ssl3.patch Patch41: openssl-1.1.1-system-cipherlist.patch Patch42: openssl-1.1.1-fips.patch Patch44: openssl-1.1.1-version-override.patch Patch45: openssl-1.1.1-weak-ciphers.patch Patch46: openssl-1.1.1-seclevel.patch Patch47: openssl-1.1.1-ts-sha256-default.patch Patch48: openssl-1.1.1-fips-post-rand.patch Patch49: openssl-1.1.1-evp-kdf.patch Patch50: openssl-1.1.1-ssh-kdf.patch Patch51: openssl-1.1.1-intel-cet.patch Patch60: openssl-1.1.1-krb5-kdf.patch Patch61: openssl-1.1.1-edk2-build.patch Patch62: openssl-1.1.1-fips-curves.patch Patch65: openssl-1.1.1-fips-drbg-selftest.patch Patch66: openssl-1.1.1-fips-dh.patch Patch67: openssl-1.1.1-kdf-selftest.patch Patch69: openssl-1.1.1-alpn-cb.patch Patch70: openssl-1.1.1-rewire-fips-drbg.patch # Backported fixes including security fixes Patch52: openssl-1.1.1-s390x-update.patch Patch53: openssl-1.1.1-fips-crng-test.patch Patch55: openssl-1.1.1-arm-update.patch Patch56: openssl-1.1.1-s390x-ecc.patch Patch57: openssl1.1-c99.patch License: OpenSSL and ASL 2.0 URL: http://www.openssl.org/ BuildRequires: make BuildRequires: gcc BuildRequires: coreutils, perl-interpreter, sed, zlib-devel, /usr/bin/cmp BuildRequires: lksctp-tools-devel BuildRequires: /usr/bin/rename BuildRequires: /usr/bin/pod2man BuildRequires: /usr/sbin/sysctl BuildRequires: perl(Test::Harness), perl(Test::More), perl(Math::BigInt) BuildRequires: perl(Module::Load::Conditional), perl(File::Temp) BuildRequires: perl(Time::HiRes) BuildRequires: perl(FindBin), perl(lib), perl(File::Compare), perl(File::Copy) Conflicts: openssl-libs < 1:3.0 Provides: deprecated() %description The OpenSSL toolkit provides support for secure communications between machines. This version of OpenSSL package contains only the libraries from the 1.1.1 version and is provided for compatibility with previous releases. %if %{with devel} %package devel Summary: Files for development of applications which will use OpenSSL Requires: %{name}%{?_isa} = %{epoch}:%{version}-%{release} Requires: pkgconfig # The devel subpackage intentionally conflicts with main openssl-devel # as simultaneous use of both openssl package cannot be encouraged. # Making the packages non-conflicting would also require further # changes in the dependent packages. Conflicts: openssl-devel Provides: deprecated() %description devel OpenSSL is a toolkit for supporting cryptography. The openssl-devel package contains include files needed to develop applications which support various cryptographic algorithms and protocols. %endif %prep %setup -q -n openssl-%{version} # The hobble_openssl is called here redundantly, just to be sure. # The tarball has already the sources removed. %{SOURCE1} > /dev/null cp %{SOURCE12} crypto/ec/ cp %{SOURCE13} test/ %patch 1 -p1 -b .build %{?_rawbuild} %patch 2 -p1 -b .defaults %patch 3 -p1 -b .no-html %{?_rawbuild} %patch 4 -p1 -b .man-rename %patch 31 -p1 -b .conf-paths %patch 32 -p1 -b .version-add-engines %patch 33 -p1 -b .dgst %patch 36 -p1 -b .no-brainpool %patch 37 -p1 -b .curves %patch 38 -p1 -b .no-weak-verify %patch 40 -p1 -b .disable-ssl3 %patch 41 -p1 -b .system-cipherlist %patch 42 -p1 -b .fips %patch 44 -p1 -b .version-override %patch 45 -p1 -b .weak-ciphers %patch 46 -p1 -b .seclevel %patch 47 -p1 -b .ts-sha256-default %patch 48 -p1 -b .fips-post-rand %patch 49 -p1 -b .evp-kdf %patch 50 -p1 -b .ssh-kdf %patch 51 -p1 -b .intel-cet %patch 52 -p1 -b .s390x-update %patch 53 -p1 -b .crng-test %patch 55 -p1 -b .arm-update %patch 56 -p1 -b .s390x-ecc %patch 57 -p1 %patch 60 -p1 -b .krb5-kdf %patch 61 -p1 -b .edk2-build %patch 62 -p1 -b .fips-curves %patch 65 -p1 -b .drbg-selftest %patch 66 -p1 -b .fips-dh %patch 67 -p1 -b .kdf-selftest %patch 69 -p1 -b .alpn-cb %patch 70 -p1 -b .rewire-fips-drbg %build # Figure out which flags we want to use. # default sslarch=%{_os}-%{_target_cpu} %ifarch %ix86 sslarch=linux-elf if ! echo %{_target} | grep -q i686 ; then sslflags="no-asm 386" fi %endif %ifarch x86_64 sslflags=enable-ec_nistp_64_gcc_128 %endif %ifarch sparcv9 sslarch=linux-sparcv9 sslflags=no-asm %endif %ifarch sparc64 sslarch=linux64-sparcv9 sslflags=no-asm %endif %ifarch alpha alphaev56 alphaev6 alphaev67 sslarch=linux-alpha-gcc %endif %ifarch s390 sh3eb sh4eb sslarch="linux-generic32 -DB_ENDIAN" %endif %ifarch s390x sslarch="linux64-s390x" %endif %ifarch %{arm} sslarch=linux-armv4 %endif %ifarch aarch64 sslarch=linux-aarch64 sslflags=enable-ec_nistp_64_gcc_128 %endif %ifarch sh3 sh4 sslarch=linux-generic32 %endif %ifarch ppc64 ppc64p7 sslarch=linux-ppc64 %endif %ifarch ppc64le sslarch="linux-ppc64le" sslflags=enable-ec_nistp_64_gcc_128 %endif %ifarch mips mipsel sslarch="linux-mips32 -mips32r2" %endif %ifarch mips64 mips64el sslarch="linux64-mips64 -mips64r2" %endif %ifarch mips64el sslflags=enable-ec_nistp_64_gcc_128 %endif %ifarch riscv64 sslarch=linux-generic64 %endif # Add -Wa,--noexecstack here so that libcrypto's assembler modules will be # marked as not requiring an executable stack. # Also add -DPURIFY to make using valgrind with openssl easier as we do not # want to depend on the uninitialized memory as a source of entropy anyway. RPM_OPT_FLAGS="$RPM_OPT_FLAGS -Wa,--noexecstack -Wa,--generate-missing-build-notes=yes -DPURIFY $RPM_LD_FLAGS" export HASHBANGPERL=/usr/bin/perl # ia64, x86_64, ppc are OK by default # Configure the build tree. Override OpenSSL defaults with known-good defaults # usable on all platforms. The Configure script already knows to use -fPIC and # RPM_OPT_FLAGS, so we can skip specifiying them here. ./Configure \ --prefix=%{_prefix} --openssldir=%{_sysconfdir}/pki/tls ${sslflags} \ --system-ciphers-file=%{_sysconfdir}/crypto-policies/back-ends/openssl.config \ zlib enable-camellia enable-seed enable-rfc3779 enable-sctp \ enable-cms enable-md2 enable-rc5 enable-ssl3 enable-ssl3-method \ enable-weak-ssl-ciphers \ no-mdc2 no-ec2m no-sm2 no-sm4 \ shared ${sslarch} $RPM_OPT_FLAGS '-DDEVRANDOM="\"/dev/urandom\""' # Do not run this in a production package the FIPS symbols must be patched-in #util/mkdef.pl crypto update make all # Clean up the .pc files for i in libcrypto.pc libssl.pc openssl.pc ; do sed -i '/^Libs.private:/{s/-L[^ ]* //;s/-Wl[^ ]* //}' $i done %check # Verify that what was compiled actually works. # Hack - either enable SCTP AUTH chunks in kernel or disable sctp for check (sysctl net.sctp.addip_enable=1 && sysctl net.sctp.auth_enable=1) || \ (echo 'Failed to enable SCTP AUTH chunks, disabling SCTP for tests...' && sed '/"zlib-dynamic" => "default",/a\ \ "sctp" => "default",' configdata.pm > configdata.pm.new && \ touch -r configdata.pm configdata.pm.new && \ mv -f configdata.pm.new configdata.pm) # We must revert patch31 before tests otherwise they will fail patch -p1 -R < %{PATCH31} %define __provides_exclude_from %{_libdir}/openssl %install [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT # Install OpenSSL. install -d $RPM_BUILD_ROOT{%{_bindir},%{_includedir},%{_libdir},%{_mandir},%{_libdir}/openssl,%{_pkgdocdir}} %make_install rename so.%{soversion} so.%{version} $RPM_BUILD_ROOT%{_libdir}/*.so.%{soversion} for lib in $RPM_BUILD_ROOT%{_libdir}/*.so.%{version} ; do chmod 755 ${lib} ln -s -f `basename ${lib}` $RPM_BUILD_ROOT%{_libdir}/`basename ${lib} .%{version}` ln -s -f `basename ${lib}` $RPM_BUILD_ROOT%{_libdir}/`basename ${lib} .%{version}`.%{soversion} done # Delete static library rm -f $RPM_BUILD_ROOT%{_libdir}/*.a || : # Rename man pages so that they don't conflict with other system man pages. pushd $RPM_BUILD_ROOT%{_mandir} ln -s -f config.5 man5/openssl.cnf.5 for manpage in man*/* ; do if [ -L ${manpage} ]; then TARGET=`ls -l ${manpage} | awk '{ print $NF }'` ln -snf ${TARGET}ssl ${manpage}ssl rm -f ${manpage} else mv ${manpage} ${manpage}ssl fi done for conflict in passwd rand ; do rename ${conflict} ssl${conflict} man*/${conflict}* # Fix dangling symlinks manpage=man1/openssl-${conflict}.* if [ -L ${manpage} ] ; then ln -snf ssl${conflict}.1ssl ${manpage} fi done popd # Delete non-devel man pages in the compat package rm -rf $RPM_BUILD_ROOT%{_mandir}/man[157]* # Delete configuration files rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/pki/* # Remove binaries rm -rf $RPM_BUILD_ROOT/%{_bindir} # Remove useless capi engine rm -f $RPM_BUILD_ROOT/%{_libdir}/engines-1.1/capi.so # Determine which arch opensslconf.h is going to try to #include. basearch=%{_arch} %ifarch %{ix86} basearch=i386 %endif %ifarch sparcv9 basearch=sparc %endif %ifarch sparc64 basearch=sparc64 %endif # Next step of gradual disablement of SSL3. # Make SSL3 disappear to newly built dependencies. sed -i '/^\#ifndef OPENSSL_NO_SSL_TRACE/i\ #ifndef OPENSSL_NO_SSL3\ # define OPENSSL_NO_SSL3\ #endif' $RPM_BUILD_ROOT/%{_prefix}/include/openssl/opensslconf.h %ifarch %{multilib_arches} # Do an opensslconf.h switcheroo to avoid file conflicts on systems where you # can have both a 32- and 64-bit version of the library, and they each need # their own correct-but-different versions of opensslconf.h to be usable. install -m644 %{SOURCE10} \ $RPM_BUILD_ROOT/%{_prefix}/include/openssl/opensslconf-${basearch}.h cat $RPM_BUILD_ROOT/%{_prefix}/include/openssl/opensslconf.h >> \ $RPM_BUILD_ROOT/%{_prefix}/include/openssl/opensslconf-${basearch}.h install -m644 %{SOURCE9} \ $RPM_BUILD_ROOT/%{_prefix}/include/openssl/opensslconf.h %endif %if %{without devel} # Delete devel files rm -rf $RPM_BUILD_ROOT%{_includedir}/openssl rm -rf $RPM_BUILD_ROOT%{_mandir}/man3* rm -rf $RPM_BUILD_ROOT%{_libdir}/*.so rm -rf $RPM_BUILD_ROOT%{_libdir}/pkgconfig %endif %files %{!?_licensedir:%global license %%doc} %license LICENSE %doc FAQ NEWS README README.FIPS %attr(0755,root,root) %{_libdir}/libcrypto.so.%{version} %attr(0755,root,root) %{_libdir}/libcrypto.so.%{soversion} %attr(0755,root,root) %{_libdir}/libssl.so.%{version} %attr(0755,root,root) %{_libdir}/libssl.so.%{soversion} %attr(0755,root,root) %{_libdir}/engines-%{soversion} %files devel %doc CHANGES doc/dir-locals.example.el doc/openssl-c-indent.el %{_prefix}/include/openssl %{_libdir}/*.so %{_mandir}/man3*/* %{_libdir}/pkgconfig/*.pc %ldconfig_scriptlets %changelog * Thu Jul 20 2023 Fedora Release Engineering - 1:1.1.1q-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild * Mon Feb 06 2023 Florian Weimer - 1:1.1.1q-4 - Backport upstream patch to fix C99 compatibility issue * Thu Jan 19 2023 Fedora Release Engineering - 1:1.1.1q-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild * Thu Jul 21 2022 Dmitry Belyavskiy - 1:1.1.1q-2 - Deprecate this package Resolves: rhbz#2108694 * Thu Jul 07 2022 Clemens Lang - 1:1.1.1q-1 - Upgrade to 1.1.1q Resolves: CVE-2022-2097 * Thu Jun 30 2022 Clemens Lang - 1:1.1.1p-1 - Upgrade to 1.1.1p Resolves: CVE-2022-2068 Related: rhbz#2099975 * Mon Jun 13 2022 Clemens Lang - 1:1.1.1o-1 - Upgrade to 1.1.1o Resolves: CVE-2022-1292 Related: rhbz#2095817 * Thu Mar 24 2022 Clemens Lang - 1:1.1.1n-1 - Upgrade to version 1.1.1n Resolves: CVE-2022-0778, rhbz#2064918 * Thu Jan 20 2022 Fedora Release Engineering - 1:1.1.1l-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Sep 20 2021 Sahana Prasad - 1:1.1.1l-1 - Upgrade to version 1.1.1.l * Mon Sep 20 2021 Miro Hrončok - 1:1.1.1k-2 - Correctly name the arch-specific opensslconf header - Fixes: rhbz#2004517 * Tue Aug 03 2021 Sahana Prasad 1.1.1k-1 - Compat package rebased to latest upstream version 1.1.1k * Thu Jul 22 2021 Fedora Release Engineering - 1:1.1.1i-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Tue Jan 26 2021 Fedora Release Engineering - 1:1.1.1i-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild * Wed Dec 9 2020 Tomáš Mráz 1.1.1i-1 - Update to the 1.1.1i release fixing CVE-2020-1971 * Fri Oct 30 2020 Tomáš Mráz 1.1.1g-3 - Corrected wrong requires in the devel package * Thu Sep 24 2020 Tomáš Mráz 1.1.1g-2 - Removed useless capi engine * Fri Sep 11 2020 Tomáš Mráz 1.1.1g-1 - Compat package created